News Forum Phone database

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > Super camera driver for k750/w800/w810 Bookmark topic

use standard driver. you might need spot photometry only once in 100 images... it is used to make very small part of picture very sharp.
--
Posted: 2007-08-05 17:19:23
Edit : Quote


hy
i had a k750 Cid36 With the normal camera modul KNC201 12.
I bought a w800 which is Cid36 too of course but it has a different serial number: KNC 201 7. i think its an earlier release and IT TAKES MUCH BETTER pictures in my opinion!
Before i thought that there is only two cam types but not. there are more of them.
http://www.esato.com/board/viewtopic.php?topic=150788

pictureo of my cams:

this was taken with the normal k750 (KNC201 12)


and this was shot by the w800 cam module. (KNC 201 7)
Both made with sarmad 5.7 with manual focus and no enhanced mode and led on...

I' ll post some photos with them.



_________________
w750 R1BC002 CID36red, vkp patches, Toshara 1.8 beta3 acoustics. changing cam drivers

[ This Message was edited by: rolkabolka on 2007-08-05 16:38 ]
--
Posted: 2007-08-05 17:38:11
Edit : Quote


w800 cam:


k750 cam Cid36 too!:


(Sarmad's 5.7- all auto)
the second pic was taken 2 minutes later!
But there was not change in weather!

_________________
w750 R1BC002 CID36red, vkp patches, Toshara 1.8 beta3 acoustics. changing cam drivers

[ This Message was edited by: rolkabolka on 2007-08-05 16:45 ]
--
Posted: 2007-08-05 17:43:28
Edit : Quote


w800 cam make this:


k750 cam:


i also have to tell You that the colours of the w800 are more realistic.
(And both of the cells runs R1BC002 walkman software and Sarmad 5.7)
--
Posted: 2007-08-05 17:58:15
Edit : Quote


Raindrops on a lush green leaf!!! SPU 1.3 beta 9. Only cropping and bordering done in photoshop.


--
Posted: 2007-08-05 18:37:24
Edit : Quote


Sarmad's 5.7 (no Spot) - indoor shots about 17:00, no indoor lighting.

normal mode


normal mode + EM


fine mode


fine mode + EM


as you see, EM made images overexposured, in both normal and fine modes...
--
Posted: 2007-08-05 18:58:33
Edit : Quote




Yes. You will get overexposure if you take pictures indoor with sarmad with EM. The only solution is to reduce EV to -0.7 or i usually use -1.3. However, you will be surprised if you take pictures outdoor at night with EM (macro on) since the pictures with get better exposure. Sarmad 5.7 is the best automatic driver (dont need to change any settings) and Raider 6.4/6.5 is the best manual driver in my opinion.
--
Posted: 2007-08-05 19:25:56
Edit : Quote


@rolkabolka
I used to read about this in (Hybrid Camera Driver for W800i/K750 )

the different between the pics may happen even in the same device but in different FW

I had this before I used to have aksd 7.7 camera driver and it was greate in my phone but when I upgrade the FW to be w800i FW then the quality of the pics changed so I start using gxg zuza driver (( zuza was not ag good as 7.7 in my K750 FW but now zuza is better ))
--
Posted: 2007-08-05 19:43:56
Edit : Quote


I agree with you. After having testing different driver on different main firmware, I notice that the firmware will affect the result of the pictures. The firwmare is responsible to making pictures like the way mac and vista use drivers for adjusting the qualities of a scanned picture. Mobile phones use the same method. W700i firmware can run on W800i hardware but w700i firmware cannot take picture if it uses w800i driver.
--
Posted: 2007-08-05 19:58:16
Edit : Quote


Power_VANO, ok, thanks! And how can I use it?
--
Posted: 2007-08-05 21:29:38
Edit : Quote

---

New Topic   Reply

Forum Index