Esato Forums - Sony Ericsson / Sony : Software, Firmware and Drivers : Super camera driver for k750/w800/w810

Index Menu

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > Super camera driver for k750/w800/w810 Bookmark topic

Page < 1 2 3 ... 550551552 ... 996 997 998 >

terminator17 Posts: 155

On 2007-08-12 10:08:29, SSyar wrote:
well guys i dont whether this thread is for me... but i have a problem in my CAMDRIVER...!

i have used Kriomag v21.8, Kriomab v21.9 and Mladen 6.36... all are working fine for really enjoyin closeups with Manual Focus in MACRO MODE... but there is a problem i m facing in all these three drivers...

whil Macro Mode is ON and FOCUS is Set to Value other than 1.0 .... and if i close the CAM and Return to the MENU ... the cam wont start again..! i have to restart my mobile to make it work.!

which fone u hv?
--
Posted: 2007-08-12 10:16:26
Edit : Quote

lpachuong Posts: > 500

Guys, if you have time then go to http://backstagevids.com or onlinecinema.org to watch some new films. Enjoy the weekend.
Btw, is there anyone has problem with Locked autofocus ? Locked autofocus can also be used as manual focus for zoom

_________________
!!! Protect our world with your phone-camera !!!
!!! Protect our world with your phone-camera !!!
!!! Protect our world with your phone-camera !!!

[ This Message was edited by: lpachuong on 2007-08-12 10:23 ]
--
Posted: 2007-08-12 11:17:18
Edit : Quote

Mr.Kája Posts: 180

@SSyar: Have you used cid49 R2B001 version? (even in readme file is "Some CID49 Phones can't open camera after close - please install v21.9 for CID49 R2B001")

--
Posted: 2007-08-12 11:43:13
Edit : Quote

SSyar Posts: 42

@terminator, @Mr.Kaja
i am using k750 R1CA021 CID_49 RED

[ This Message was edited by: SSyar on 2007-08-12 11:03 ]
--
Posted: 2007-08-12 11:56:37
Edit : Quote

Mr.Kája Posts: 180

SSyar Me too (ok, brown) and it helped. Just read readme a try it. It's a moment and in readme is, that if you have cid49 and can't open camera...that's your case. I'm not sure if it really will help you, but It should and I have no more ideas.
--
Posted: 2007-08-12 12:12:58
Edit : Quote

SSyar Posts: 42

well well well.... it works... for Kriomag 21.8,

TUU CHAH GAYA RE BHEERU
--
Posted: 2007-08-12 12:28:38
Edit : Quote

metallica1 Posts: 33

Raiderski Posts: > 500

ok, it's sunday so i only post new version ond go off...

Driver 6.5 TEST 4

link1: http://www.sendspace.com/file/life3k
link2: http://www.mediafire.com/?2wngh9myzzn

changelog:

- bugfix: functions value changes can mess in EM and shutter speed setting (reported by strong)

- new: saturation control added at EV -1.0
- change: zoom control moved from EV -1.0 to -2.0

- improve: saturation parameter value reduced and separated to normal and night mode

- new: brightness control added
optional function, unavailable under any EV in original driver form

- new: contrast control added
optional function, unavailable under any EV in original driver form

optional function, functions displacement - readme.txt, point 1a and 1b

before someone ask about ISO, this function is useless because you only want lowest possible ISO100 (K750/W800) and ISO80 (in W810). if you ever wonder how low ISO picture is achieved i will answer: because of slow shutter speed. there is no other way for sensor to catch enough light. i'm sure you understand this - it's one of many photography basis

driver has shutter speed control so use it by EM/ENM or manual setting

ISO80 picture in W810 can be created only if firmware allow on this (driver can set only ISO100 as lowest) and i don't have any influence on this process

--
Posted: 2007-08-12 14:35:26
Edit : Quote

lpachuong Posts: > 500

I'm unhappy to say A4A 4.2 --- read the post below for V 4.5 has just been released

(since the last one has bugs) Locked autofocus is added )

Here is the link: http://www.mediafire.com/?fmhlvjbsg2l
Some changes:
-Contrast and brightness are now replaced by zoom and ISO
- EV -0.3: iso -0.7: zoom
- If you use ISO, make sure that you know what are you using since you will have negative effect comparing with auto ISO
- Zoom+infinity focus is fixed with x6/x16
- Shutter speed is increased. ( it is fine on my camera).
- If you use you can use macro+night mode together to improve the quality of picture at night ( need customize exposure in case of overexposure) and macro+led but dont need to use all of them in once since it already has high exposure.
- To get risk of overexposure, read guide.txt. However, the more you play with exposure, the more you like the driver. Start with 1.7 when you get overexposure then reduce/increase to make it perfect.
Funny driver one

The quality is definitely improved but while I editing it, I found one thing interesting: Locked autofocus . It will work as other drivers, but it will be useful if you want to take draft shot.
Here is how it work: choose autofocus, then change ev to choose any setting you want, take a shot, then you zoom to change the value of the setting, take a shot. At this shot, you won't here the sound from the camera although you chose autofocus before, bcz focus is locked and it help take picture quicker but still get autofocus range. It is difficult to explain but you will see it is different.

With locked autofocus, you will get the correct focus without having to adjust focus and you still can see the preview picture by pressing half shutter as manual focus. It will also help you do more correct manual focus and i'm sure you will find it is useful one day. I decided to put a stop for a rest for a while until I really found st more interesting. THank you for helping me nowadays.

KeZeN Posts: 2

Good Photos
--
Posted: 2007-08-12 15:34:55
Edit : Quote

Page < 1 2 3 ... 550551552 ... 996 997 998 >

New Topic Reply