Sony Ericsson / Sony : Software, Firmware and Drivers : K750 / W800 Firmware Overview
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> K750 / W800 Firmware Overview
Bookmark topic
Quote:
On 2006-03-25 11:05:58, snowdevl wrote:
I know its software related, because when clicking the buttons, they still make the key click sound, but they just dont do anything.
You sure it's software related? Hearing a click doesn't mean that it can't be hardware related. Have you tried running the key test in the service menu?
--
Posted: 2006-03-25 13:16:50
Edit :
Quote
Quote:
hhmm, prolly a hardware failure, it coincided when you have updated the device thinkin that the update was the cause of this failure...
try returning it to the shop for replacement... is still under warranty?
Yes, it is. I don't get it though. The last firmware upgrades did work. Maybe the update didn't go well. i'll retry again on another machine. thanks!
Quote:
On 2006-03-25 10:24:02, bosched wrote:
I would agree, does sound like a hardware problem to me, the only other thing you could try is to uninstall then reinstall seus, run seus and say continue anyway when it says no update available. seus will then redownload the firmware and flash your phone again, just incase your phone has had a bad flash..
I'll try that, Thanks!
[ This Message was edited by: XGate on 2006-03-25 12:34 ]
--
Posted: 2006-03-25 13:30:53
Edit :
Quote
I'm trying to update my K750i using a DCU-60 cable but everytime I get to the point where it says "Insert the USB cable" when I do my mobile keeps turning on!
--
Posted: 2006-03-25 18:08:28
Edit :
Quote
hmmm .... ok . k750i , updated it to the last version , & some wierd problem started .
i have this CDS-60 connected to my comp , & the phone is in it all the time .
every time that i boot up the computer with the phone on it , my paired computer , in the bluetooth configuration simply dissapears .
i'm using conseptronic bt dongle , & i have to repair every time again , its driving me crazy .
this thing started only after the update from the SE software , with the latest version .
the CDS connected to the computer with the original cable .
any1 else with this wierd stuff ?
don't really want to flash it backwards , but there must be some thing about it ....
help ?
--
Posted: 2006-03-25 22:09:02
Edit :
Quote
Quote:
On 2006-03-25 13:16:50, El Martino wrote:
Quote:
On 2006-03-25 11:05:58, snowdevl wrote:
I know its software related, because when clicking the buttons, they still make the key click sound, but they just dont do anything.
You sure it's software related? Hearing a click doesn't mean that it can't be hardware related. Have you tried running the key test in the service menu?
Im pretty sure it is software related. Also, the phone will turn using the power button at the top, but then it wont turn off, even tho its the same button, if that makes any sense at all lol. Sounds like software to me..
Also, I cant run the key test because I cant press the side buttons on the joystick to get to the service menu...
hahaha
--
Posted: 2006-03-26 10:41:11
Edit :
Quote
What version SEUS do people have. Mine is version 1.0.0.0
Do people have a different one? I went to the SE website and downloaded the new one, but still says i have this version.
Is this why it keeps telling me my phone is up to date.?
--
Posted: 2006-03-26 12:16:10
Edit :
Quote
Quote:
On 2006-03-26 10:41:11, snowdevl wrote:
Also, I cant run the key test because I cant press the side buttons on the joystick to get to the service menu...
hahaha
Mmm... That really stinks! Perhaps try a master reset? Otherwise I suggest bringing it to a service center. :-/
--
Posted: 2006-03-26 12:45:25
Edit :
Quote
snowdevl
Im sure it is hardware related. When i press
--
Posted: 2006-03-26 13:10:26
Edit :
Quote
Quote:
On 2006-03-26 12:45:25, El Martino wrote:
Quote:
On 2006-03-26 10:41:11, snowdevl wrote:
Also, I cant run the key test because I cant press the side buttons on the joystick to get to the service menu...
hahaha
Mmm... That really stinks! Perhaps try a master reset? Otherwise I suggest bringing it to a service center. :-/
Yup, tried a full master reset. Tried reinstalling the firmware twice. Theres no SE service centers here in NZ, and I dont wanna pay a dodgy phone repair store big bucks, just for them to tell me it cant be fixed or something.
Brankar: Yeah but this happened straight after a firmware upgrade. The phone was working fine 1min before the upgrade, then as soon as I turned it on after, it wasnt working. Also, I cant get to the service menu to do a key test because I cant use the joystick left button, as mentioned above.
If it was hardware, wouldnt the whole joystick stop working instead of just two directions?
--
Posted: 2006-03-26 13:43:06
Edit :
Quote
Snowdevl
Sounds like you should use Davinci to flash back to R1AA - got to be worth a try before sending away for repair.
--
Posted: 2006-03-26 17:14:21
Edit :
Quote
New Topic
Reply
