Sony Ericsson / Sony : Software, Firmware and Drivers : Super camera driver for k750/w800/w810
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Super camera driver for k750/w800/w810
Bookmark topic
one more pic with A4A 6.2
this time I placed the phone on the table and used self-timer to get sharp pic
Fine Quality+EM+Macro+Exposure 1.4 (no LED)
the image became quite nice
--
Posted: 2007-08-20 23:10:34
Edit :
Quote
On 2007-08-20 22:51:06, lpachuong wrote:
A4A 6.2
Hello everyone. It is unbelievable that in just one day there has been 3 version of A4A
My bad, my bad. This time, thanks to Power_Vano who has point out a problem in
full range shot in night mode or low light . Here is a new fixed:
http://www.mediafire.com/?8mzfix9xjfy
Changes
-
Full range pictures at night without light source can be take with
Led+Macro+Night mode+exposure 1.4+FIne quality+infinity focus for the best quality (exposure maybe reduced) These parameters have been tested by me many times and my phone was really hot
-
Close range shot at night witout light source :
Led+Macro+Night mode+FIne quality+ autofocus You dont need to change exposure since autofocus will get the correct exposure for you. Here are some close-up pictures:
The full size pictures of these two images are better. I will upload the link later.
- When you take picture indoor at night with light on, please move to
Normal quality for low exposure. (Macro still on)
In brief:
Always use macro
--
Fine quality for {outdoor shot} or {indoor shot in the morning/afternoon with exposure around 1.5) or (close range shot within 10-60cm with led+nightmode+autofocus)
---
Normal quality for indoor shot at night with light source in case you get overexposure in fine quality and you dont like adjusting exposure (This is not my strong suggestion)
---
Led+nightmode on+macro will work but It is difficult to get nice picture with this phone-camera bcz
you will need dozens of medicine to stop your shaking hand 
---
When you switch between fine quality and normal quality, the first picture will have the effect from the previous quality(EM on/off) . I don't know how to fix it now, but it works fine at the second shot
---
The best way to understand
how to control overexposure is to play with different parameters and you will know what exposure is suitable at certain places.
---
I will be online for the next 45mins after watching Detective Conan 468 on veoh.com and then I will go to bed. So, see you later and sleep well
Thank you everyone.
Best regards
_________________
To be or not to be !!!
W800i/K750i driver: A4A - 4.5 11/08/2007
http://www.freewebs.com/ict2006_2007/A4A_4.5.RAR
[ This Message was edited by: lpachuong on 2007-08-20 23:21 ]
You are really quick at producing drivers
--
Posted: 2007-08-21 00:23:19
Edit :
Quote
On 2007-08-20 22:51:06, lpachuong wrote:
...
When you switch between fine quality and normal quality, the first picture will have the effect from the previous quality(EM on/off) . I don't know how to fix it now, but it works fine at the second shot
...
small tip:
seq_ss_take=$c
6 00
#DEF_SHOT
$cl
#IMP_SHOT
$cx
well, if something has to be wrong then it is only register 6 faulty usage. take care of $s6 and $b6 commands in whole code. i used reg 6 as a storage for individual bits to describe various driver features states. because of this idea, reg 6 in your driver has many collisions, for example: set any WB color to automatic (1.0) value and snapshot will be taken with EM usage (reason is $b6 01 7 1), after camera open 1st picture is always with EM. after EM shot every next shot will be without EM
jizzz... 01:39... time to sleep
cheers
_________________
W800 CID36 R1BD001
www.flickr.com/photos/8469432@N06/[ This Message was edited by: Raiderski on 2007-08-21 08:17 ]
--
Posted: 2007-08-21 01:40:03
Edit :
Quote
I'm sorry to see that there are stability issues with some K750 and W800 phones with Sarmad 5.8.. unfortunately, there isn't too much I can do since I have designed the driver for the W810 (the phone I have).. I might make a K750 version in the future, I'm not sure.. but if a W810 user has crashes, please let me know.. as that should not happen.
--
Posted: 2007-08-21 02:10:29
Edit :
Quote
Test the Sarmad 5.8.
Very nices shots..
--
Posted: 2007-08-21 03:08:30
Edit :
Quote
@lpachuong
A4A 6.2
turn off the camera with macro on, and then turn it on, it is always turned off automatically
my phone is k750c
[ This Message was edited by: leetiran on 2007-08-21 07:34 ]
--
Posted: 2007-08-21 06:19:36
Edit :
Quote
A4A 6.2 indoor shots
Manual focus
Exposure in 1.9
With Flash MXE-60 (Good sync)
Macro+Nightmode+MXE-60
Next time I place daylight shots!
--
Posted: 2007-08-21 06:20:16
Edit :
Quote
On 2007-08-20 22:01:04, DarKMaGiCiaN wrote:
BACK ^_^
LONG TIME .....
I reseved lots of emails from people who want more supermode functions in DarKMaGiCiaN 0.92
because of that I'm here with new Driver
actually it is DrKMaGiCiaN Driver with Jonaugust_69
Professional Camera Driver v8.64 functions + mod for CID49 phons
(( 0.92 Professional Camera Driver ))
Link:
http://www.mediafire.com/?8flmymnzhbj
User Guide
------------------------------------------------
first layer of menus(marco off)
EV-2.0=Scene (1.0 -1.9) 1.0 is Default AutoExposure (1.1Portrait 1.2Landscape 1.3Twilight Portrait 1.4Twilight Landscape 1.5Sports 1.6Beach/Snow 1.7Document
EV-1.7=Contrast (1.1 -2.7)
EV-1.3=JPEG_LEVEL (1.0 -4.0) 34% - 94% step 2
EV-1.0=Manual Shutter Speed (1.0 -4.0) 1.0 is AUTO Day(1/5000 - 1/6) Night(1/5 - unknow)
EV-0.7=ISO (1.0 -2.3) 1.0 is AUTO
EV-0.3=linear zoom(1.0-4.0)(1X to 16X)
EV 0.0=original EV (1.0 -3.5)(can be changed with Manual Shutter Speed together)
EV+0.3=Manual Focus (1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0)(support zoom)
EV+0.7=Manual WB
EV+1.0=Manual effect
EV+1.3=Spot (1.0 -1.7)1.0 is Default, 1.1 SPOT, Others unknow
EV+1.7=CC(green to red) (1.0-4.0),(00~7F)green (ff~80)red
EV+2.0=CC(yellow to blue) (1.0-4.0),(00~7F)yellow (ff~80)blue
second layer of menus(marco on)
EV-2.0=Brightness (1.0 -2.5)
EV-1.7=Contrast (1.1 -2.7)
EV-1.3=Sharpening (1.1 -2.7)
EV-1.0=Hue(1.1-4.0)
EV-0.7=Saturation(1.1-4.0)
EV-0.3=Focus setting(1.0-1.5)(1.0 marco mode 1.1 normal mode 1.2 full range 1.3 Fast mode 1.4 Fast mode and full range 1.5 Macro mode)default 1.0
EV 0.0=original EV (1.0 -3.5)(can be changed with Manual Shutter Speed together)
EV+0.3=Manual Focus (1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0)(support zoom)
EV+0.7=Manual WB
EV+1.0=Manual effect
EV+1.3=Spot (1.0 -1.7)1.0 is Default, 1.1 SPOT, Others unknow
EV+1.7=mirroring(1.0 to 1.3)(1.0Horizontal mirroring 1.1Horizontal mirroring 1.2Vertical mirroring 1.3Vertical mirroring)
EV+2.0=SlowShutter (1.0 -4.0) 1/20' to 2' (can be changed with ISO together)
have fun ^_^
[ This Message was edited by: DarKMaGiCiaN on 2007-08-20 21:27 ]
hey can u tell me whats d difference in this driver and jonaugust driver??
thanks
--
Posted: 2007-08-21 06:26:47
Edit :
Quote
On 2007-08-20 22:51:06, lpachuong wrote:
A4A 6.2
Hello everyone. It is unbelievable that in just one day there has been 3 version of A4A
My bad, my bad. This time, thanks to Power_Vano who has point out a problem in
full range shot in night mode or low light . Here is a new fixed:
http://www.mediafire.com/?8mzfix9xjfy
_________________
To be or not to be !!!
W800i/K750i driver: A4A - 4.5 11/08/2007
http://www.freewebs.com/ict2006_2007/A4A_4.5.RAR
[ This Message was edited by: lpachuong on 2007-08-20 23:21 ]
It is unbelievable that in just one day there has been 3 version of A4A
just kidding..good work..
its alwayz to have better driver for phone..
hope for your final very soon
--
Posted: 2007-08-21 06:30:20
Edit :
Quote
DarKMaGiCiaN Posts: > 500
On 2007-08-21 06:26:47, terminator17 wrote:
On 2007-08-20 22:01:04, DarKMaGiCiaN wrote:
BACK ^_^
LONG TIME .....
I reseved lots of emails from people who want more supermode functions in DarKMaGiCiaN 0.92
because of that I'm here with new Driver
actually it is DrKMaGiCiaN Driver with Jonaugust_69
Professional Camera Driver v8.64 functions + mod for CID49 phons
(( 0.92 Professional Camera Driver ))
Link:
http://www.mediafire.com/?8flmymnzhbj
User Guide
------------------------------------------------
first layer of menus(marco off)
EV-2.0=Scene (1.0 -1.9) 1.0 is Default AutoExposure (1.1Portrait 1.2Landscape 1.3Twilight Portrait 1.4Twilight Landscape 1.5Sports 1.6Beach/Snow 1.7Document
EV-1.7=Contrast (1.1 -2.7)
EV-1.3=JPEG_LEVEL (1.0 -4.0) 34% - 94% step 2
EV-1.0=Manual Shutter Speed (1.0 -4.0) 1.0 is AUTO Day(1/5000 - 1/6) Night(1/5 - unknow)
EV-0.7=ISO (1.0 -2.3) 1.0 is AUTO
EV-0.3=linear zoom(1.0-4.0)(1X to 16X)
EV 0.0=original EV (1.0 -3.5)(can be changed with Manual Shutter Speed together)
EV+0.3=Manual Focus (1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0)(support zoom)
EV+0.7=Manual WB
EV+1.0=Manual effect
EV+1.3=Spot (1.0 -1.7)1.0 is Default, 1.1 SPOT, Others unknow
EV+1.7=CC(green to red) (1.0-4.0),(00~7F)green (ff~80)red
EV+2.0=CC(yellow to blue) (1.0-4.0),(00~7F)yellow (ff~80)blue
second layer of menus(marco on)
EV-2.0=Brightness (1.0 -2.5)
EV-1.7=Contrast (1.1 -2.7)
EV-1.3=Sharpening (1.1 -2.7)
EV-1.0=Hue(1.1-4.0)
EV-0.7=Saturation(1.1-4.0)
EV-0.3=Focus setting(1.0-1.5)(1.0 marco mode 1.1 normal mode 1.2 full range 1.3 Fast mode 1.4 Fast mode and full range 1.5 Macro mode)default 1.0
EV 0.0=original EV (1.0 -3.5)(can be changed with Manual Shutter Speed together)
EV+0.3=Manual Focus (1.0 Autofocus, 1.1 Focus to Infinity, Manual Focus Range 1.2-4.0)(support zoom)
EV+0.7=Manual WB
EV+1.0=Manual effect
EV+1.3=Spot (1.0 -1.7)1.0 is Default, 1.1 SPOT, Others unknow
EV+1.7=mirroring(1.0 to 1.3)(1.0Horizontal mirroring 1.1Horizontal mirroring 1.2Vertical mirroring 1.3Vertical mirroring)
EV+2.0=SlowShutter (1.0 -4.0) 1/20' to 2' (can be changed with ISO together)
have fun ^_^
[ This Message was edited by: DarKMaGiCiaN on 2007-08-20 21:27 ]
hey can u tell me whats d difference in this driver and jonaugust driver??
thanks
AS I Said it is DarKMaGiCiaN 0.92 + Supermode fucntion from Jonaugust_69 Professional Camera Driver v8.64
^_^
--
Posted: 2007-08-21 07:23:23
Edit :
Quote
New Topic
Reply
