>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> C902 Firmware Overview
Bookmark topic
Nothing for Hong Kong either.
WC
--
Posted: 2008-07-28 00:42:33
Edit :
Quote
I've got another question. Is it only me or every C902 makes "shitty" photos? Well, maybe it's the driver issue. They're (photos) indistinct.
Oh, and it seems that the phone is a little bit slow. Is it normal?
[ This Message was edited by: MiHaU on 2008-07-28 16:08 ]
--
Posted: 2008-07-28 17:06:55
Edit :
Quote
I agree with you to an extent, I find photo's taken in the dark to be really really bad, but as for taking landscape shot's it seems excellent.
I personally think too it takes a better shot if you don't just leave it on auto, for example if your outside set the scene mode to 'Landscape' and set the white balance to 'Daylight'. It takes some extra effort granted, but the end result would justify it.
Shot taken without using "Auto" settings
Firmware is something to do with it too though, I got an N95 when it was very first out and it was okay, but 18 months on and 9 firmwares later (12 to 21) you honestly wouldn't believe the snaps where from the same phone.
Give the phone some time to mature, and I'm sure things will improve. Well at least this is what I tell my smug mate who owns a K850
--
Posted: 2008-07-28 18:29:52
Edit :
Quote
SEMC Boot flash problem (trying to use SEUS)
I have a C902, and when I plug it in my computer with the correct method (holding C... etc) when trying to update it through the Update Service, my computer says that driver installation failed. I am trying to manually install the drivers that I found for the phone in the C902 firmware thread, but my computer still won't install/recognize the phone and let me pass the "plug your phone"-window in SEUS.
I have tried installing PC Suite, and that's no problem. I have tried all the 8 different USB ports in my computer - still no recognition in SEUS.
I have Windows XP 32bits with SP3.
Please help me out
--
Posted: 2008-07-29 15:29:07
Edit :
Quote
On 2008-07-29 15:29:07, Hansomfiser wrote:
SEMC Boot flash problem (trying to use SEUS)
I have a C902, and when I plug it in my computer with the correct method (holding C... etc) when trying to update it through the Update Service, my computer says that driver installation failed. I am trying to manually install the drivers that I found for the phone in the C902 firmware thread, but my computer still won't install/recognize the phone and let me pass the "plug your phone"-window in SEUS.
I have tried installing PC Suite, and that's no problem. I have tried all the 8 different USB ports in my computer - still no recognition in SEUS.
I have Windows XP 32bits with SP3.
Please help me out
Did it used to work or not?
If not, you may need to download/update your motherboard drivers, they also include USB chipset drivers.
--
Posted: 2008-07-29 15:51:59
Edit :
Quote
Have your SEUS downloaded the updates already?
--
Posted: 2008-07-29 17:52:12
Edit :
Quote
On 2008-07-29 17:52:12, iSE wrote:
Have your SEUS downloaded the updates already?
Yes.
My phone is perfectly recognized in PC Suite, media transfer mode etc etc, but not when trying to identify it through SEUS. All of my other USB devices works perfectly well.
--
Posted: 2008-07-29 18:00:38
Edit :
Quote
On 2008-07-29 15:29:07, Hansomfiser wrote:
...my computer says that driver installation failed...
Once its plugged in and after that message/popup ballon has displayed can you view the phone in device manager? If so uninstall the driver that windows has for it, forcing it to freshly install it next time the phones plugged in.
On my laptop when plugged in using the "C" method it pops up as an "SEMC Flash Device" (or something similar, doing this from memory), so try finding something like that in device manager.
--
Posted: 2008-07-29 18:05:37
Edit :
Quote
Once its plugged in and after that message/popup ballon has displayed can you view the phone in device manager? If so uninstall the driver that windows has for it, forcing it to freshly install it next time the phones plugged in.
On my laptop when plugged in using the "C" method it pops up as an "SEMC Flash Device" (or something similar, doing this from memory), so try finding something like that in device manager.
When I plug the phone in pressing C, a balloon popup says "SEMC Flash drive...." and then shortly after, it says "The new hardware could not be installed. It might not work properly". When I look in Device manager, the SEMC thing is there, and when I right click and Uninstall it, to plug the phone in once again to make a fresh install, the exact same thing happens without positive results.
--
Posted: 2008-07-29 18:42:13
Edit :
Quote
Still not available the update for APAC-ANZ.
--
Posted: 2008-07-29 18:45:16
Edit :
Quote
New Topic
Reply
