>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
General
> Angry with SonyEricsson
Bookmark topic
i had the same problem on and off, not all the time. i think its something to do with the pin connector...realigned the connector and the problem gone
--
Posted: 2009-10-05 08:35:29
Edit :
Quote
On 2009-10-05 07:49:19, mode wrote:
On 2009-10-05 06:46:28, bronxdude wrote:
how do you guys deal with headset detection problem? I am having one with my W980
Wipe the connector with a clean cloth or better yet ,alcohol swab. It might just be dust preventing proper connection. If it persists, the internal part might be damaged. Apparently the newer fastport (wider compared to A1 phones) is prone to wear and tear damage due to poor design (something about some thin, flimsy part being used which would easily break with force), an SE technician friend of mine disclosed
Thanks mode!
Will try this at home later. any specific criteria for alcohol? like isopropyl or anything?
--
Posted: 2009-10-05 09:27:30
Edit :
Quote
On 2009-10-05 08:35:29, mallaccra wrote:
i had the same problem on and off, not all the time. i think its something to do with the pin connector...realigned the connector and the problem gone
Thanks mate.
How do you realign them?
--
Posted: 2009-10-05 09:35:24
Edit :
Quote
@bronxdude
I'm not too sure about the optimal types of alcohol but the common CD cleaner should work best
--
Posted: 2009-10-05 09:35:59
Edit :
Quote
No alcohol! Get some contact-cleaner, stay on the save side.
Open up your phone tutorial here
--
Posted: 2009-10-05 09:38:48
Edit :
Quote
@mode.... that you have a W800i it still does not say you know how to use it ...
you can not put the W995i in the same setting as the W800i cos the W995 has a poor version of so called equalizer ... with 3 steps up and 3 down.... the equalizer of the W800i is 8 steps up and 8 down, the sound get much more effected by it then in the W995i ... the W995 has also so called clear bass... now it is so clear that you can hardly hear it!, the megabass of the W800i is too hard but with the real equalizer i can fix it .
not only that the volume is also about 30% lower then the W800i
i did not talk about battery life that with 3G is empty in the evenings.
some people get blind when they own something and try to tell me that it is me that got it wrong,sorry this phone is not so good as some make it and i have the right to say it,have 5 phones from SE at home and this one is the worst.
this is the setting i use in the W800i
and that's all the familly
--
Posted: 2009-10-05 09:40:30
Edit :
Quote
On 2009-10-05 09:35:59, mode wrote:
@bronxdude
I'm not too sure about the optimal types of alcohol but the common CD cleaner should work best
got it! thanks!
My W980 has that error. It can't recognize the headset. But when I plug the charger, it easily deos recognize it. I brought the phone to an authorized repair shop. I only got the phone a week ago, and here goes the error.
do you think replacing the port would solve this?
--
Posted: 2009-10-05 09:40:31
Edit :
Quote
so wher can I get it, mate? I live here in the Philippines. Thanks much
--
Posted: 2009-10-05 09:43:41
Edit :
Quote
On 2009-10-05 09:35:24, bronxdude wrote:
On 2009-10-05 08:35:29, mallaccra wrote:
i had the same problem on and off, not all the time. i think its something to do with the pin connector...realigned the connector and the problem gone
Thanks mate.
How do you realign them?
AFAIK the pin connector realigning thing worked for the dinosaur Ericsson phones eons ago
Perhaps what mallacra's refering to is probably using a needle to scrape off any residue that may have collected and hardened with humid air in between the pins on the fastport connector. Forgot to mention that works too, may sound a bit brutal but that's how SE technicians get rid of tough residues in between the pins, works like a charm every time
[ This Message was edited by: mode on 2009-10-05 08:58 ]
--
Posted: 2009-10-05 09:43:49
Edit :
Quote
@ Bronxdude. Try a shop that sells electronic parts.
Ebay[ This Message was edited by: hihihans on 2009-10-05 08:57 ]
--
Posted: 2009-10-05 09:54:17
Edit :
Quote
New Topic
Reply
