Esato Mobile
Sony Ericsson / Sony : Software, Firmware and Drivers : Hybrid Camera Driver for W800i/K750
> New Topic
> Topic Locked
Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > Hybrid Camera Driver for W800i/K750 Bookmark topic
Page <  123 ... 616263 ... 462463464>

frz_1985 Posts: 34

Quote:
On 2006-08-09 16:13:49, QuickShare™ wrote:
just give them a lil bit of time mate.. im sure they'll do it for our sake its quite a long process to change a cam.driver via FAR manager.. ( at least its over than 5 minutes )



u can place a shortcut file (ending with extension .@), in far manager, and shortcut the file to ur phone memory, or mem stick ..

then u won't need far manager no more, u can easily put/overwrite the camdriver file in ur mem stick, and if u restart ur phone, the new driver will be visible ..

in the shortcut file (camdriver0.dat.@) put this for example:

/tpa/user/other/cam/camdriver0.dat

and put that in the /FS/ifs/settings/camera/ folder in far manager (camdriver0.dat.@) and remove the original camdriver file .. and put the cam driver file in ur phone memory in the folder other/cam ..

that's all!

works fine by me, have this also for my customised menu, and layout.xml file ..


[ This Message was edited by: frz_1985 on 2006-08-09 16:03 ]
--
Posted: 2006-08-09 16:58:22
Edit : Quote

2uk3y Posts: 214

@ frz_1985
yeah u r right but the risky is when ur card damage......
all data will gone n ur phone must get error .... i guess that will happen
correct me if wrong !!!
--
Posted: 2006-08-09 17:20:49
Edit : Quote

marcpogs Posts: 89

hi, does anyone here have problems on hybrid 2.71?

I noticed that the fone crashes after you leave it on standby at video mode and w/ night mode on. with this, you cannot access the camera afterwards and have to revert to your original camdriver to correct it and put it in still mode.

anyway, im looking forward for the next updated camdriver perhaps and just stick with the hybrid 2.4 at the moment.

thanks.
--
Posted: 2006-08-09 19:39:16
Edit : Quote

aksd Posts: > 500

Hello all,

I've started re-writing the original R1CA driver with some of my own algorithms. Heres's one fo them tell me what you think. Its not a hybrid and its version will be 10...10.01....10.02 and so on while my hybrid drivers are 2...... so as not to cause confusion.

Heres one of them....version 10:

http://rapidshare.de/files/28793785/camdriver0.dat.html

and heres 10.01 with some small niggles corrected....now this is awesome if used with nightmode.....nightmode feature has been tweaked with....check it out.....this maybe one of my best so far....but please use with nightmode all the time for best results......I have increased shutter time without night mode so more noise will be visible but faster pics can be taken without night mode.

http://rapidshare.de/files/28796740/camdriver0.dat.html



[ This Message was edited by: aksd on 2006-08-09 19:24 ]
--
Posted: 2006-08-09 19:57:33
Edit : Quote

frz_1985 Posts: 34

@2uk3y: only the cam won't work if the card would be damaged, because u dont shortcut all the files, only the cam driver, when u put another card in it with the camdriver in ur new mem stick, everything will be okay after restart of ur phone ..

but that's why i've put the file in my phone memory, it's more safer than in the mem stick i think.
--
Posted: 2006-08-09 20:39:45
Edit : Quote

HarvJH Posts: 319

Could i use that driver above on my W800 with R1BC002 firmware?
--
Posted: 2006-08-09 20:42:56
Edit : Quote

aksd Posts: > 500

Yes you can
--
Posted: 2006-08-09 20:45:11
Edit : Quote

HarvJH Posts: 319

Ok i will give it ago, is it any better than cam driver 2.71?
--
Posted: 2006-08-09 21:20:16
Edit : Quote

1X10N Posts: 52

hi, i already test the hybrid 2.71, and i have the same problem that marcpogs. in video mode with the nightmode turned on, the phone record the video correctly, but once you close the cam cover, the cam don´t work until you reboot your phone.
sorry for my bad english.
--
Posted: 2006-08-09 22:30:30
Edit : Quote

HarvJH Posts: 319

Wow verison 10.01 with nightmode is good, very good.
Is version 10.01 better than version 10? Or do they both do different things?
Also is there a way to put the nightmode settings into cam driver version 2.71 cos that would be good. Oh and could you do it so the shutter speed is quicker as well on the 2.71 driver.


[ This Message was edited by: HarvJH on 2006-08-09 22:40 ]
--
Posted: 2006-08-09 23:27:11
Edit : Quote
Page <  123 ... 616263 ... 462463464>

New Topic   Topic Locked
Forum Index

Esato home