News Forum Phone database

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > Super camera driver for k750/w800/w810 Bookmark topic

can you load Raider's SM 6.5 T5 for eXtreme mAcRo™ ?
for k750 cid 49

[ This Message was edited by: f@y$t() on 2007-08-28 16:21 ]
--
Posted: 2007-08-28 17:04:42
Edit : Quote


quick comparison raiderski 6.5 and lpachuong 7.5
all settings in auto on all pictures-w810i

6.5



7.5



6.5




7.5




6.5




7.5





--
Posted: 2007-08-28 17:14:08
Edit : Quote


JeganathanK: Of course, look at manual (btw. run, till raiderski will come, or he would kill you:)) How does Power_VANO said, macro in 6.5 is for only short range, but if you don't like it, it nothing easier to open camdriver in a text editor and change (I guess) AF_SCAN_MODE= $s0 01 into 0 00.

ljcii: Beta 8 is last version of hybrid driver, not 5.8. I hope, 5.8 is only "one".

Aaand..well, maybe you could'n post so much big photos, if it isn't really important (direct comparsion, big mistakes...), but just thumbnails and links.... It's a big chaotic for me and time longer time to load the page:)
--
Posted: 2007-08-28 17:54:13
Edit : Quote


@ Sarmad: I would like to change your driver that:

Normal mode = Quicker Enhanced Mode + spot off
Fine Mode = Quicker Enhanced Mode + spot on

Is it correct in that case that DEFAULT_SHOT and ENHANCED_SHOT share the same values, or do I have to change something more??

DEFAULT_SHOT= $c7 00
$s7 01
#EMPTY_EVENT_FIFO
#COLOR_COR
$z0 $-0 re
$c0 00
06 02 00 01 01 01 #CMD_END
$cl
$p0 0d
$c0 01
$p0 01
$c0 00
#LedEM
$cx
$cx
06 02 00 01 01 $ze
$ce 09 33 $cl 32 $cx $f
#WAIT_FOR_MODE_TRANSITION
#WAIT_FOR_CAPT_START
$cx
$t0020
$cx;

ENHANCED_SHOT== $c7 00
$s7 01
#EMPTY_EVENT_FIFO
#COLOR_COR
$z0 $-0 re
$c0 00
06 02 00 01 01 01 #CMD_END
$cl
$p0 0d
$c0 01
$p0 01
$c0 00
#LedEM
$cx
$cx
06 02 00 01 01 $ze
$ce 09 33 $cl 32 $cx $f
#WAIT_FOR_MODE_TRANSITION
#WAIT_FOR_CAPT_START
$cx
$t0020
$cx;


Thank you, if you can help me...
Randolph

--
Posted: 2007-08-28 17:59:40
Edit : Quote


Hello today I try spu_1_3_b9 driver and it takes perfect pics look




I used supermode in this shots -2.0 and 3.3 zoom
There is one problem when i take a picture with -2.0 and 4.0zoom(for JPEG quality 98%) the camera turn off and the pic doesn't save in the memory ((
But in this quality pics are also really good


--
Posted: 2007-08-28 18:22:11
Edit : Quote


I have a job for A44's users

Hello everyone, here come A4A -7.8

What is new and what is that job?

Here is my answer:

@CID49:


-First of all,you can see how sharp the pictures are with A4A-7.7? And are you pleased with it? I know some will say Yes and some will say No. But you may have notice that A4A-7.7 has more exposure than the previous versions for CID49. That is bcz I settup the contrast and brightness to 01. That is just for testing and I received comments about it. Thank you for your help. To be honest, I dont like that as well. Therefore, in A4A-7.8: No change in sharpness - No change in colour - Contrast is 01 - Brightness is 00

- Compression is setup to 91% which may crash on CID49. However, I haven't got my phone crashed so far. If you face with that problem please tell me as soon as possible or see the following information.
-Here is the new setting on A4A-7.8: First of all, I would like to say Thank you Raiderski for his _Set-Profile_ code. By using his code, I have an idea for -Colour Profile- So what is Colour Profile

- Colour Profile Colour profile is a function which can be turn on by setting EV +2.0 . For every zoom step, you will get a pre-defined settings including: colours/brigthness/saturation/contrast... which you like. For example: In A4A-7.8, I have settup 4 defined profile:

-------At EV+2.0, zoom 1.0: default value for all of the settings. You will have the same quality as A4A-7.7
-------At EV+2.0, zoom 1.1: You will get Cloudy Profile which I pick up from Raiderski's driver. However, in order to make it has the same effect as Raiderski's driver does, please use Normal quality + macro off. And you must read this one: With my driver, you still be able to use supermode when you change the profile. However, the viewfinder will flash to dark and then go back to normal again. So why does this happen? It is bcz we can't get risk of it until we have a new way to set up profile. When you change zoom to 1 step (+- 0.1), exposure/shutterspeed's values in supermode will change with the value of the zoom so you will see it darker when you are in door or at low light enviorment. However, it will go back to normal after 1 sec since I setup the Init value for it to go back to normal, ecept the pre-defined colours are different .
-------At zoom 1.2: It is settup to have more yellow. As you know, when you take the picture in the late afternoon, you may get blue or white pictures whereas there are other colours. By set up more yellow, the pictures will look like they have some more sunlight.
--------At zoom 1.3: Which is settup for you when you take picture without extra lightsource apart from the LED light. As u can see that you usually get more blue when you take picture with LED and it is bcz our sensors seem to obtain more blue than any other colours. Therefore, I setup some pink to overcome blue and force blue to work at a certain value so that we can have a balance in colours with the LED. I havent check it carefully but some friends have helped me out and they said it is fine. I'm looking for your respond

So these are still the pre-defined colour profile I setup for you after many tests. Thanks to Edux and Power_Vano who have helped me with this.

Why there is a job for us?
Of course there is. As you know that there are so many zoom step at an EV value (zoom 1.0-4.0). So, there are some zoom left which you can set up your own colour profile


How can I settup my own colour profile
While we are waiting for raiderski's software, you can edit my driver and setup your own colour profile:
Here is the instruction:
**Open my driver in notepad
**Search for WB_SET_4: you will see like this WB_SET_4= ; between '=' and ';' there is a space where you can setup your own profile


What can I settup
You can settup: Colours - Saturation (cid36/w810i) - Sharpness (cid36/810i) -brightness - contrast

+++ Saturation: #CMD(58,**) where ** is the value you want
+++ Sharpness: #CMD(56,**)
+++ Contrast: #CMD(55,**)
+++ Brighness #CMD(54,**)
+++ Colours: You can only add 1 or 2 extra colours so that you will have enriched colours. There are only 4 colours you can set up now: Magenta - Blue - Green - Yellow
-------Yellow/Blue: #SET(21,**) where **: yellow-00~7F-the bigger, the more yellow/ blue -ff~80- the smaller, the more blue
-------Green/Magenta: #Set(20,**) where **: (00~7F)green (ff~80)magenta or red
-------You can add 1 extra or a combination of Yellow+Green: Forest/desert/sand; Yellow + Magenta: good ; Blue+Green: for beach,forest(trees)+sky... ; and Blue+Magenta: good
Examples

I would like to create a profile with: contrast=02, colour: blue+green sharpness=05
Here is the code:

WB_SET_4= #CMD(11,00) #CMD(55,02) #CMD(56,05) #SET(21,F5) #SET(20,3f) #CMD(13,01) ;

When you setup colours, you need #CMD(11,00) and #CMD(13,01)


What else should I do?
Yes. You need to put WB_SET_4 to SET_PROFILE:
The Set_Profile will have a structure like this:

SET_PROFILE=$b6 00 4 1 #CMD(04,00)
$c0 0a
....
#WB_SET
$cl
$c0 0b
$s0 0b #CC_GREEN
$s0 0b #CC_MAGENTA
.....
#DF_SETTING
$s0 10 #SET_WB_LL(21) Raiderski's profile
$cl
$c0 0c
......
$s0 0c #SCENE
$s0 0c #SET_PROFILE
#DF_SETTING
#WB_SET_** [** - Here is the place you replace my profile with your profile]
$cl.. $cx...$cx;

With my current code, there are 4 setup profile (1.0-1.3) If you want to add new profile, then add
$cl
$c0 0*
$s0 0* #CC_GREEN
$s0 0* #CC_MAGENTA
$s0 0* #CC_BLUE
$s0 0* #CC_YELLOW
$s0 0* #CHANGE_ZOOM
$s0 0* #ISO
$s0 0* #CHANGE_FOCUS
$s0 0* #SET_EXPOSURE
$s0 0* #SPOT_ON
$s0 0* #SHUTTERSPEED
$s0 0* #SHUTTER_ISO
$s0 0* #SCENE
$s0 0* #SET_PROFILE
#DF_SETTING
#WB_SET_**


Between #WB_SET_** from the previous profile and $cx $cx... Every time when you add a new profile, remember to add 1 more $cx at the end to complete the command

This sound complicated but it is easy when you do it. Hope you enjoy it.
_________________
To be or not to be !!!
Please save our world. Save our world to save our lives and our generation.
There is no place as good as your house with your family. Home sweet home.

[ This Message was edited by: lpachuong on 2007-08-28 19:21 ]
--
Posted: 2007-08-28 18:36:43
Edit : Quote


Heya everyone,

Firstly, thanks to raidersi and lpachuong for taking so much effort to make these cam phones do so much better...

I have some questions to ask. For those who do the comparisons between drivers, do you all use different phones? Or you switch the drivers on the same phone? OR rather, how to switch the camdrivers in the quickest way possible?
[I have to like flash a different firmware for far manager to work then replace camdriver0.dat, then reflash the firmware back again. I takes like 15-30 mins to do which is quite a long time...]

I have tested both raiderski's 6.5 test 5 and a4a 7.6 on my k750i cid 49 rca021... I can't get the images up yet due to a problem with my comp and my phone so I'll post them later...
for now, a short comment would be that the 6.5 always has a bit of overexposure problem so i have to manually adjust the exposure. Also, the colours may seem a bit faded sometimes...
for 7.6, indoors have an overexposure problem which is fixed also by using manual exposure of around 1.5 or 1.6.
Also, I can't seem to get the amount of sharpness that I see that a lot of people here are getting although I have rather steady hands, I think. It often turns out to be fine but still slightly blurry. Most of the time i use manual exposure and maybe focus and shutter speed but others are always auto.

Anyways, I'm on my way to testing the 7.7 so thanks to raiderski and lpachuong.

silverxii
--
Posted: 2007-08-28 18:57:03
Edit : Quote




Great lpachoung!!!!!!!!!!!
but... where is the driver?
--
Posted: 2007-08-28 19:00:53
Edit : Quote


Sorry, I haven't finished typing it
--
Posted: 2007-08-28 19:02:12
Edit : Quote


@lpachuong
i'm testing your driver, the last you upload for w810

most of the pictures are blured, no matter if its in normal or fine, so far everything works fine. just that of the exposure time

w810 cid50 (dont let uploading drivers for w810 )

@sarmad
i tried your 5.8, by the way its like 100 pages back ¬¬

its easier to take pictures, but i don't know... could you add exposure time, green, magenta, blue, yellow, and the other functions from other drivers? i read you will make a hibrid, i never found it, so i dont know if you dont did it or i dont search it very well

[ This Message was edited by: aabg on 2007-08-28 18:12 ]
--
Posted: 2007-08-28 19:09:09
Edit : Quote

---

New Topic   Reply

Forum Index