Sony Ericsson / Sony : Software, Firmware and Drivers : Super camera driver for k750/w800/w810
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Super camera driver for k750/w800/w810
Bookmark topic
@Raiderski:
what is "EM in Normal quality" option?you don's explain in your readme_too.txt.is that:select normal quality and the EM is always on?
--
Posted: 2007-08-30 07:43:38
Edit :
Quote
@ Raider @ Sarmad
Hi
i have some color notice for you (dear) :
Your camdrive on W810i R4EA031 (my phone) on sun light
take the photos a bit yellow
and on lamp light its take the photos a bit green .
same that i say in last post .
The color(red+green+yellow+blue correction)+contrast+
brightness is perfect in 5.8Sarmad
and
all the other settings in 5.6Raider
is perfect .
Now who can generate a camdrive with this options ? (plz)
For W810i R4EA031 (or mybe only for me :-] )
thanks
--
Posted: 2007-08-30 09:43:14
Edit :
Quote
Could please someone provide a sarmad 5.8 camdriver with 91% compression or tell me how to do this modification... Would be very kind...
THX for your help,
Randolph
--
Posted: 2007-08-30 09:44:03
Edit :
Quote
And when we will have the final version?
i have 2 things to finish:
- file save
- small documentation how to adapt code in others drivers
sxa
yes, exactly this is it
salambaba
Now who can generate a camdrive with this options ? (plz)
your hands using my configuration tool
Randolph
5.8 already have 91%... you want lower or higher value? why?
all requests should go to Sarmad because he is the code owner
--
Posted: 2007-08-30 10:35:49
Edit :
Quote
@Raiderski
I want the "EM in Normal quality",how can I edit your code?
Your driver get nice picture in my w810c ,but I want EM always on.Can you help me?
--
Posted: 2007-08-30 10:47:07
Edit :
Quote
I use multi camdriver
I like your camdriver,
sarmad 5.8, raiderski 6.5 test 5, lpachuong A4A_7.8, because it different sharpness, color, and function. I change driver according to different light and condition.
So, with
minicommander 2.2, I can change driver with copy and replace old driver from memory card without restarting my phone in everywhere.
Many thanks for your drivers.
Now, I used A4A_7.8, it is looking better than before.
[ This Message was edited by: VegaR on 2007-09-06 07:43 ]
--
Posted: 2007-08-30 10:49:48
Edit :
Quote
sxa
open code in notepad and find:
EM_ON_NORMAL_QUALITY= $s1
00;
replace 00 to 01, save, upload and that's all
ofcourse when EM/ENM is enabled you can not use shutter speed function
--
Posted: 2007-08-30 11:06:33
Edit :
Quote
Ok. This will be my last public release for A4A. I'm tired now. Although I can listen to you guys but it is too much for me to follow your requests. I'm a human, I have my freedom and I am not your servant. I am kind enough to make you feel please and happy but it has gone too much. For those who just come up with requests must look at yourself and ask a question: I'm a boss or I'm a user. 2 months ago, I knew nothing about I2C code and now I know it, understand it, make my own code. WHy don't you spend some hours to study it and make your own driver? The reason why I make the driver is that I want to improve my phone quality. I have no camera when I come to UK to study. I have missed lots of good events without having a picture. Some of my friends have gone and I have no pictures of them. WHen my old phone was dead, I decided to get a phone and at that time k750i is the cheapest with 2mp I could get. However, its quality is not really good as a real digitial camera. With this reason, I have tried to make it perfect on my phone and I'm pleased with it now.
Everyone has different point of views about things.
If you want to make comparision then test my driver with a digital camera, not with other drivers or your eyes. To be honest, I just tested my drivers with my k750i cid49 and i'm sure of its quality. And w810i/w800i, i just imagine and follow your comments. From now on, I'll just send my new drivers to my friends here, not for public anymore since I'm
so tired with your requests
http://www.mediafire.com/?cewxl3djmlg
Read the guide to know how to change things/increase-decrease compression to reduce crash...
Goodbye.
@Raiderski: Thank you master for your new software.
_________________
To be or not to be !!!
Please save our world. Save our world to save our lives and our generation.
There is no place as good as your house with your family. Home sweet home.
[ This Message was edited by: lpachuong on 2007-08-30 10:20 ]
[ This Message was edited by: lpachuong on 2007-08-30 10:31 ]
--
Posted: 2007-08-30 11:19:24
Edit :
Quote
On 2007-08-30 11:06:33, Raiderski wrote:
sxa
open code in notepad and find:
EM_ON_NORMAL_QUALITY= $s1 00;
replace 00 to 01, save, upload and that's all
ofcourse when EM/ENM is enabled you can not use shutter speed function
Thanks ,Raiderski!!!!
--
Posted: 2007-08-30 11:33:14
Edit :
Quote
On 2007-08-30 10:35:49, Raiderski wrote:
5.8 already have 91%... you want lower or higher value? why?
all requests should go to Sarmad because he is the code owner
Oh ... allready 91% ?? I changed the value in driver 5.7 to 91 % and this stopped in myCID49 K750i with CID36 camera module those annoying vertical lines. As driver 5.8 provides better pictures but vertical lines with my k750i, I wanted to experiment with higehr values. Therefore I am looking for a hint where to change this parameter...
Am I right that higher % means less compression and mor picture-quality?
Regards,
Randolph
--
Posted: 2007-08-30 11:36:37
Edit :
Quote
New Topic
Reply
