Sony Ericsson / Sony : Software, Firmware and Drivers : Super camera driver for k750/w800/w810
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Super camera driver for k750/w800/w810
Bookmark topic
first of all: respect guys, no flames! ok?
Randolph
more than 88% quality is good only if you are sure that your camera won't crash. i have unpleasant experiences in this matter
salambaba
nope, i won't do any changes, you have to wait for tool. it will be available soon. only Lpachuong has special privileges
Tuner
it's obvious...
1. image on viewfinder before snapshot is pure image data with all visible by sensor details
2. image on viewfinder after snapshot is compressed JPEG without many details
that's why in first case you can see much more than is second case. this doesn't mean that filtering doesn't work...
cropped, with filtering
cropped, without filtering
why i'm not using no-filtering on viewfinder all the time in no-night mode?
because i don't like effect of "ultra sharp edges". i can enable no-filtering only in manual focus zoom preview when sharp edges are very important for eyes
[ This Message was edited by: Raiderski on 2007-08-31 10:34 ]
--
Posted: 2007-08-31 11:30:42
Edit :
Quote
more than 88% quality is good only if you are sure that your camera won't crash. i have unpleasant experiences in this matter
I agree. W810 wont have crash problem because of big (at lease 700 KB) buffer size, but k750/w800 only have 616 KB buffer and low compression causes them to crash at "hard" scenes.
--
Posted: 2007-08-31 11:54:44
Edit :
Quote
i got one 743kb file with w810i
--
Posted: 2007-08-31 11:56:44
Edit :
Quote
On 2007-08-31 11:54:44, Power_VANO wrote:
more than 88% quality is good only if you are sure that your camera won't crash. i have unpleasant experiences in this matter
I agree. W810 wont have crash problem because of big (at lease 700 KB) buffer size, but k750/w800 only have 616 KB buffer and low compression causes them to crash at "hard" scenes.
Have you tried this one, Power_Vano?
Want to play with 95% of compression?
cam_ss_jpeg_buf_size_8=95500;
seq_set_prop_5_1=$z0
$s2 5f
$c0 08 #SET_JPEG_MIN(01,90) #SET_JPEG_MAX(02,57) #SET_JPEG_AVG(01,f4) #SET_JPEG_QUALITY
--
Posted: 2007-08-31 11:56:50
Edit :
Quote
nop. I haven't tried it.
--
Posted: 2007-08-31 13:13:19
Edit :
Quote
@Raiderski
Great work man ! I think you are the best profesional moder
Iam waiting in suspense for configuration tool thanks!
@lpachoung
Good luck my old friend !!!!!
--
Posted: 2007-08-31 13:33:11
Edit :
Quote
How are you doing on SE-NSE, strong?
--
Posted: 2007-08-31 13:48:22
Edit :
Quote
Very well thanks!
--
Posted: 2007-08-31 13:59:11
Edit :
Quote
@ Ipachuong and Raiderski: I have tried out the codeline (thank you very, very much) in sarmadīs 5.7 up to 96% / 5G and the cam did not crash!
cam_ss_jpeg_buf_size_8=96640; // 601.5 KB buffer for 1632x1244 snap
seq_set_prop_5_1=$z0
$s2 5f
$c0 08 #SET_JPEG_MIN(01,90) #SET_JPEG_MAX(02,57) #SET_JPEG_AVG(01,f4) #SET_JPEG_QUALITY
Strange, but true: compared to this sarmadīs 5.8 driver ( I added cam_ss_jpeg_buf_size_8=96640; // 601.5 KB buffer for 1632x1244 snap ) shoots/provides better picture quality with 91%!!
So I would like to try around with sarmadīs 5.8... but there settings are different and not so easy to change for one like me who has no idea of programming ... ould it be that not compression percentage, but buffersize over 601.5kb crashes our phones.
My K750i is red CID49 R1DB001 with CID36 camera module...
Thanks for hin and help,
Randolph
--
Posted: 2007-08-31 14:13:50
Edit :
Quote
On 2007-08-31 09:10:43, VegaR wrote:
On 2007-08-30 17:48:11, sniperwolf41 wrote:
On 2007-08-30 10:49:48, VegaR wrote:
I use multi camdriver
I like your camdriver,
sarmad 5.8, raiderski 6.5 test 5, lpachuong A4A_7.8, because it different sharpness, color, and function. I change driver according to different light and condition.
So, with
minicommander 2.2, I can change driver with copy and replace old driver from memory card without restarting my phone in everywhere.
Many thanks for your drivers.
Now, I used A4A_7.8, it is looking better than before.
How you it makes to change driver of camera?
Guide to easy change camdriver
- Patch the phone with "move camera to /tpa/user/other/drv patch", you can read tutorial in this forum, forums.se-nse.net or
- Copy default camdriver0.dat in [/tpa/user/other/drv before you patch
- /tpa/user/other/drv will be /c:/other/drv in minicommander browser
- memory_card will be /e:/ in minicommander browser
- Make a folder according driver name
memory_card/driver/driver_name (like /sarmad 5.8, /A4A_7.7, /raider_6.5_5)
- Copy all drivers that you need via USB to
memory_card/driver/driver_name
- Every folder contain mod camdriver0.dat
In the phone:
- Open MiniCommander
- Browse phone memory, copy and replace
/e:/driver/driver_name/camdriver0.dat to
/c:/other/drv/camdriver0.dat with minicommander
- Close program, open camera and the driver was changed (check with *>*
Sorry my English, I hope can help you with this guide
I think MiniCommander better than MobyExplorer
[ This Message was edited by: VegaR on 2007-08-31 08:15 ]
Thanks VegaR
But I thought that you changed driver using MiniCommander 2,2 without having done patch of fast exchange of driver, I already make this exactly using the gerenciador of w810.
But thanks for the information
_________________
W810i Fusion White,CID49 Firmware R4EA031 with many patches,Memory Stick PRO Duo 4GB and 512MB,blackicerock+myacoustics 1.1 sound driver,A4A_x.x camera driver.
I
my W810i
[ This Message was edited by: sniperwolf41 on 2007-08-31 13:55 ]
--
Posted: 2007-08-31 14:40:35
Edit :
Quote
New Topic
Reply
