Sony Ericsson / Sony : Software, Firmware and Drivers : Hybrid Camera Driver for W800i/K750
>
New Topic
>
Topic Locked
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Hybrid Camera Driver for W800i/K750
Bookmark topic
the v10.1 is more stable than the 2.7 hybrid etc, becuz of the size of the camdrive file ..
the 2.72 is about 40 kb and the 10.1 around 23 kb, that causes the shutdown when u try in video mode becuz of a memory overload, in my case i removed the information lines in je camdrive file, and the problem was solved, hope this will work 4 you people !
[ This Message was edited by: frz_1985 on 2006-08-10 19:53 ]
--
Posted: 2006-08-10 20:52:44
Edit :
Quote
i've doing some test with 2.72 and 10.01, and here are the results, i've used macro and night mode on and off but no light, these are indoor photos with low ligth:
10.01 macro on, night off
10.01 macro on, night on
2.72 macro on, night off
2.72 macro on, night on
--
Posted: 2006-08-10 20:53:58
Edit :
Quote
[ This Message was edited by: frz_1985 on 2006-08-10 20:09 ]
--
Posted: 2006-08-10 20:57:11
Edit :
Quote
Hai AKSD, Great Job Man, I Have been following UR work 4 quite some time now & all I can say it that U R a genius...
Keep up the Good Work
My Vision of a Utimate Cam Driver
Quality 92%
Over Exprosure @ the Minimum.
Vivid Colors
Sharpness Above 80%(The Most Important Aspect)
File size around 550 to 600Kb
Videos @ 15 to 20Fps.
Can U make One 4 Me with the above Spec.
--
Posted: 2006-08-10 22:50:22
Edit :
Quote
Quote:
On 2006-08-10 20:52:44, frz_1985 wrote:
the v10.1 is more stable than the 2.7 hybrid etc, becuz of the size of the camdrive file ..
the 2.72 is about 40 kb and the 10.1 around 23 kb, that causes the shutdown when u try in video mode becuz of a memory overload, in my case i removed the information lines in je camdrive file, and the problem was solved, hope this will work 4 you people !
[ This Message was edited by: frz_1985 on 2006-08-10 19:53 ]
i removed the information lines in my camdriver and now it is 22kb, the driver work, but still it isnt stable, with the same problem.(i use r1ca)
and frz_1985, did you test the shortcut
camdriver0.dat.@? if it work can you upload it?thanks
--
Posted: 2006-08-10 22:57:44
Edit :
Quote
i tell yah guys its not about the size... i think the processor of K750 can handle a 15KB difference and its not such a big deal...
i guess it has somethin to do with the phones prepin up... ive seen some sections in the driver that sets the phone up after the shutter opens. its within.. not the size... and both 10s and hybrids 2s version are not quite stable.
and of course others have done this...
- open shutter...
- record a video (10sec will do)
- play the video until it stops...
- close the shutter...
- open it again
this time try to capture a shot if you can...
if your driver fails.. then its unstable..
other torture test for hybrids and 10s drivers...
- with SPOT on: try outdoors... sky, bright clouds (not direct sunlight of course) go get your snap
- without SPOT: same thing... try noontime..
if your driver fails with these tests... then its unstable... but take note! its because it was tweaked up... so its no its usual self. so better take note of the facts that will crash your driver and try to limit the use of your camera on that part... this way youll keep your driver safe from crashes...
good testin guys!
--
Posted: 2006-08-11 03:32:36
Edit :
Quote
2.7 series is unstable with r1ca for some reason. will try to fix it.
--
Posted: 2006-08-11 03:34:00
Edit :
Quote
Anyone with MXE-60 tested with v10.1?
My picture taken with MXE-60 seems to be reudced in file size, the biggest I can see is around 385kb or something. Never went more than that
--
Posted: 2006-08-11 03:35:47
Edit :
Quote
FYI, i try to change the buffer size of image,
from :
cam_ss_jpeg_buf_size_8=927C0; // 600 KB buffer for 1632x1244 snap
to :
cam_ss_jpeg_buf_size_8=96640; // 616 KB buffer for 1632x1244 snap
I hope this can help to prevent camera crash.
--
Posted: 2006-08-11 05:53:51
Edit :
Quote
Quote:
On 2006-08-11 03:35:47, ullyeus wrote:
Anyone with MXE-60 tested with v10.1?
My picture taken with MXE-60 seems to be reudced in file size, the biggest I can see is around 385kb or something. Never went more than that
It's really like that even with unmodified drivers. Pics taken with MXE-60 are much more compressed that pics taken without it.
--
Posted: 2006-08-11 06:49:48
Edit :
Quote
New Topic
Topic Locked
