News Forum Phone database

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > Hybrid Camera Driver for W800i/K750 part 2 Bookmark topic

Thanx for the advice , I've tried to modify the value from 6 to 5 in the 9.0 "big size" of blcksnaker , but the test I've made are almost the same in quality .. I'll try another pair and then I'll post my results here for a comparison ... by the way I've got a K750i cid36 with R1CA0021 on .
--
Posted: 2007-03-16 10:20:58
Edit : Quote


I receive the following errors while updating my camera driver!

When I upload a 30KB less than camera driver, it works. otherwise, it doesn't work at all when it's more than 25 kb... So the following, I can't upload it.

[*]Hybrid Camera Driver
[*]Super camera driver
[*]http://www.filefactory.com/file/2863fc/

Almost camera drivers found at esato.com

Camera drivers less than 28 KB works. What do to?

Code:17:01:27| XS++ v1.2 Ready !
17:01:32| Attempting to open the interface...
17:01:32| ++++++++++++++++++++++++++++++++++
17:01:32| Turn off phone
17:01:32| Hold C Button on phone and connect phone.
17:01:32| You have 30 seconds.
17:01:32| ++++++++++++++++++++++++++++++++++
17:01:32| PORT STATUS: ACTIVE
17:01:44| Disconnected... Unplug the phone
17:01:52| Attempting to open the interface...
17:01:52| ++++++++++++++++++++++++++++++++++
17:01:52| Turn off phone
17:01:52| Hold C Button on phone and connect phone.
17:01:52| You have 30 seconds.
17:01:52| ++++++++++++++++++++++++++++++++++
17:01:56| PORT STATUS: ACTIVE
17:01:56| Baseband ID: 8040
17:01:56| Hardware Platform: db2010 Marita compact
17:01:56| Protocol Version: 3.1
17:01:56| Sending loaders\db2010_cid00_prodid_p3k.bin...
17:01:57| This is a PRODUCTION_ID loader
17:01:57| Activating GDFS...
17:01:57| phone name detected
17:01:57| Sending loaders\db2010_cid36red_flash_r2ab.bin...
17:01:58| This is a FLASH loader
17:01:58| ++++++++++++++++++++++++++++++++++
17:01:58| PHONE INFO
17:01:58| ++++++++++++++++++++++++++++++++++
17:01:58| DBID: db2010
17:01:58| OTP CID: 36
17:01:58| EROM CID: 36
17:01:58| EROM color: Red
17:01:58| IMEI: 35682900xxxxxx
17:01:58| Phone: W800
17:01:58| Operator: APAC_1
17:01:58| CDA: CDA102430/101 R3A
17:01:58| Firmware: R1BC002
17:01:58| EROM: n/a
17:01:58| ++++++++++++++++++++++++++++++++++
17:01:58| Ready for operation!
17:02:04| Sending loaders\db2010_cid00_prodid_r2f.bin...
17:02:27| ++ Error: FSX failed
17:02:27| Disconnected... Unplug the phone
17:07:33| Shutting down...
17:15:37| XS++ v1.2 Ready !
17:15:38| XS++ v1.2 Ready !
17:15:48| Attempting to open the interface...
17:15:48| ++++++++++++++++++++++++++++++++++
17:15:48| Turn off phone
17:15:48| Hold C Button on phone and connect phone.
17:15:48| You have 30 seconds.
17:15:48| ++++++++++++++++++++++++++++++++++
17:15:53| PORT STATUS: ACTIVE
17:15:53| Baseband ID: 8040
17:15:53| Hardware Platform: db2010 Marita compact
17:15:53| Protocol Version: 3.1
17:15:53| Sending loaders\db2010_cid00_prodid_p3k.bin...
17:15:53| This is a PRODUCTION_ID loader
17:15:53| Activating GDFS...
17:15:53| phone name detected
17:15:53| Sending loaders\db2010_cid36red_flash_r2ab.bin...
17:15:54| This is a FLASH loader
17:15:54| ++++++++++++++++++++++++++++++++++
17:15:54| PHONE INFO
17:15:54| ++++++++++++++++++++++++++++++++++
17:15:54| DBID: db2010
17:15:54| OTP CID: 36
17:15:54| EROM CID: 36
17:15:54| EROM color: Red
17:15:54| IMEI: 35682900xxxxxx
17:15:54| Phone: W800
17:15:54| Operator: APAC_1
17:15:54| CDA: CDA102430/101 R3A
17:15:54| Firmware: R1BC002
17:15:54| EROM: n/a
17:15:54| ++++++++++++++++++++++++++++++++++
17:15:54| Ready for operation!
17:16:03| Sending loaders\db2010_cid00_prodid_r2f.bin...
17:16:03| This is a PRODUCTION_ID loader
17:16:03| Sending loaders\db2010_cid00_cert_r2e.bin...
17:16:03| This is a CERTIFICATE loader
17:16:03| Breaking in...
17:16:03| Waiting for breakin hello...
17:16:03| Sending loaders\db2010_cid00_hack_cs_v23.bin...
17:16:05| This is a CHIPSELECT loader
17:16:05| Activating loader...
17:16:05| Activating GDFS...
17:16:06| Checking if loader is unlocked...
17:16:06| This loader is UNLOCKED
17:16:06| Sucess! CS-loader has been unlocked!
17:16:06| +++ Deleting files...
17:16:06| +++ Uploading /files_to_upload to phone...
17:16:06| Upload ./files_to_upload/ifs/settings/camera/camdriver0.dat to ifs/settings/camera/camdriver0.dat
17:16:06| Activating FS...
17:16:30| Make directory (cmd 03-07) ifs
17:16:30| Make directory (cmd 03-07) ifs/settings
17:16:30| Make directory (cmd 03-07) ifs/settings/camera
17:16:30| Delete file (cmd 03-04) ifs/settings/camera/camdriver0.dat
17:16:30| Upload file (cmd 03-0C) ifs/settings/camera/camdriver0.dat
17:16:31| Failed sending datachunk. Returnvalue is 0x03
17:16:31| Failed
17:16:31| Done uploading
17:16:31| ++ Sending shutdown command to phone...
17:16:31| ++ Customizing was SUCCESSFUL!
17:16:31| ++ Disconnecting phone...
17:16:31| ++ You may now unplug your phone.
17:16:31| ++ FSX was successful
17:16:33| Disconnected... Unplug the phone
17:16:56| Shutting down...

I am using R1BD001 w800i firmware.

And, which of the above drivers do you prefer?

I tried using FAR Manager but still, I can connect but it hangs with uploading the cameradriver0.dat file... it hangs at 2000 bytes i think.. or equals to 25KB or more...
--
Posted: 2007-03-16 10:44:09
Edit : Quote


jkadg


jizus man!

you have cid 36

you can use the simples posible method: FAR with SEFP...


Don't use XS.. it's usless in your case... you lucky one!!!


Don't bother... give me a PM with your messenger ID and I'll give you FAR that works with your phone.


--
Posted: 2007-03-16 11:33:46
Edit : Quote


@BLKSNAKER
@gxg
Sharpness not ordered in values from min to max...it's only coresponding value with jpeg algorithm compression(in 99% cases only 4,5 n 6 is well working values)...This compression is different in cid36 n cid49 handset...

--
Posted: 2007-03-16 12:26:45
Edit : Quote


can you give an compresion value coresponding to 5 for sharpness?

I dont't have sufficient time to find the value!
--
Posted: 2007-03-16 12:44:56
Edit : Quote


Hi . im new in this forums . mind showing me a step by step guide of the drivers? .. im a total noob here .. or is there already a step by step .. cause i dun see it on the 1st or 2nd post .. thanks! .. PS: if sumone can give me a link to increase the volume of my k750i (with w800i) firmware on the walkman player .. or increasing the quality of the sound and the camera . pleease help

*jedi_dc

Thankz.

[ This Message was edited by: jedi_dc on 2007-03-18 10:39 ]
--
Posted: 2007-03-16 15:16:17
Edit : Quote


Don't be offended.. buy this is my standard answer:

On the top are some buttons.. at the end of the raw..is one named SEARCH.

Use it, by all mean!

you will find at least 14 threads about it. And If you bowsed in this thread 1 or 2 pages back... you might saw an link: www.se-nse.net. That one YOU HAVE to browse and read.

Then, if you cannot understand what those guys tells in their tutorials...

THEN you have the wright to come here, to put an OFFtopic Question...asking something not related to this topic.

Don't be offended, and dont get mad... USe the search luke! this is the Wright way to learn...

I can instruct you, but without being there to help in case is something wrong... you'll blame me that I bricked your phone.
So... pleasend reading!
--
Posted: 2007-03-16 21:41:37
Edit : Quote


Hmm, I'd like you guys take a look at these photos. I took 4 pictures of the same thing, with 4 diffenert drivers. 8.53, sharp, Zuza 2 and 9.0. Take a look and tell me what do you think....
8.53


sharp


zuza 2


9.0


There were quite bad lighting conditions, so I was quite amazed to have such nice colours. exept for Zuza 2 - it was a little bit too cool for me.
--
Posted: 2007-03-17 01:24:54
Edit : Quote


hi friends,

i have 1 old camera driver 4.4 from r1l002 firmware.....
its not work with latest firmware... i love that driver.... can someone from u can edit this driver to use with... latest firmware.....plzz..

if yes here it is........

http://www.filefactory.com/file/651981/

http://www.filefactory.com/file/651981/
--
Posted: 2007-03-17 10:46:24
Edit : Quote


"i have 1 old camera driver 4.4 from r1l002 firmware.....
its not work with latest firmware... i love that driver.... can someone from u can edit this driver to use with... latest firmware.....plzz.. "
Here you go mate! now is Working it will be read as 5.05 (you have to put >4.5 for version)
http://www.sendspace.com/file/11rg88


This is the driver tuned for the ones with 5 max for sharpness.
http://www.sendspace.com/file/gjldhy

I'm waiting some impressions.. maybe some photos. I think is some yellow tent in it!
--
Posted: 2007-03-17 13:32:46
Edit : Quote

---

New Topic   Reply

Forum Index