>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> C902 Firmware Overview
Bookmark topic
What I believe will almost definitely fix it will be manually deleting the driver. After asking my device manager to locate the driver path it returned 2 different Sony Erricson drivers required to operate it, and 1 windows.
So first, un install EVERYTHING to do with SE on your computer, and then manually delete these 2 driver files; (the uninstallers may have done this themselves)
C:Windowssystem32DRIVERSggflt.sys
C:Windowssystem32DRIVERSggsemc.sys
Both are signed by Sony Erricson so won't be needed by anything else on your PC. After this reinstall PC Suite, then Update Service and you should be set.
Obviously changes in your system32 aren't without risk, but I'm 95% sure deleting those wont do damage, and if they do it's nothing a system restore won't fix. Post back if your still struggling.
[ This Message was edited by: masterjonny8 on 2008-07-29 18:54 ]
[ This Message was edited by: masterjonny8 on 2008-07-29 18:55 ]
--
Posted: 2008-07-29 19:53:36
Edit :
Quote
Thanks Masterjohnny,
I did all of that, and also downloaded the drivers for my phone from that EMMA site, and re-installad PC Suite, and when it asked for drivers I pointed everything to the folder with the drivers from EMMA, and it all worked fine. But only for PC Suite
It still says that the SEMC devide could not be installed in SEUS, despite the fact that I did all of the things you told me to do.
--
Posted: 2008-07-29 20:27:53
Edit :
Quote
Well sorry buddy, I really am flat out of ideas, effectively you deleted all of your drivers and put in nice fresh ones, so the problem is something more deep seated?
If you know what chipset you have (Nforce, Intel, AMD) you can try updating your chipset drivers, and in turn updating your USB ports.
Apologies if I'm talking down to you here, I don't know how tech savvy you are
In fact, I've just thought, maybe you could manually update the drivers with ones from EMMA for you SEMC Flash Device.
Plug the phone in, in "C" mode, right click 'Properties', choose the 'Driver' tab, Update Driver, and point it to the folder you got from EMMA.
[ This Message was edited by: masterjonny8 on 2008-07-29 20:25 ]
--
Posted: 2008-07-29 21:22:23
Edit :
Quote
I have a question or two.
I have/had a branded 3UK C902, last night i performed a debrand via KulanKendi, which put the following firmware on the phone:
1204-1731
R3BH002
080619
Sony Ericsson
It's not even the most recent firmware is it? I thought it would perform a similar operation as to what changing the product code on a Nokia does, allowing me to use SEUS to update to the latest firmwares... Wrong.
I connected to SEUS and it told me it cannot update? nothing about having the latest firmware already, although when you do the check fom the phone it say's I already have latest update??
I am not to impressed, I paid for the debrand and update but don't seem to have got the latest update.
Is there anything I can do to make SEUS allow me to get the new firmware?
Updating/debranding Nokia's was easy, this phone is a nightmare!
--
Posted: 2008-07-30 21:24:15
Edit :
Quote
On 2008-07-30 21:24:15, ianeb wrote:
I have a question or two.
I have/had a branded 3UK C902, last night i performed a debrand via KulanKendi, which put the following firmware on the phone:
1204-1731
R3BH002
080619
Sony Ericsson
It's not even the most recent firmware is it? I thought it would perform a similar operation as to what changing the product code on a Nokia does, allowing me to use SEUS to update to the latest firmwares... Wrong.
I connected to SEUS and it told me it cannot update? nothing about having the latest firmware already, although when you do the check fom the phone it say's I already have latest update??
I am not to impressed, I paid for the debrand and update but don't seem to have got the latest update.
Is there anything I can do to make SEUS allow me to get the new firmware?
Updating/debranding Nokia's was easy, this phone is a nightmare!
Yes, you can wait some time to flash a new firmware with XS++
--
Posted: 2008-07-30 21:58:48
Edit :
Quote
The reason SEUS won't update your phone hr because you already have the latest firmware for unbranded phones.There is no new firmware available for Western European C902's since R3BH002.All other firmware releases since R3BH002 that have been put on SEUS have been for branded C902's so far.
This message was posted from a C902
--
Posted: 2008-07-30 23:07:36
Edit :
Quote
@rookwise you missed a trick - brand your phone to o2 and get the latest
firmware ... NOT :-]
--
Posted: 2008-07-30 23:27:40
Edit :
Quote
Wrong! i have an unbranded version and updated mine to R3CA037 with SEUS.
--
Posted: 2008-07-31 00:04:56
Edit :
Quote
On 2008-07-31 00:04:56, piflechien wrote:
Wrong! i have an unbranded version and updated mine to R3CA037 with SEUS.
Rookwise said for Western European, it may be out in other regions
--
Posted: 2008-07-31 00:35:14
Edit :
Quote
Hi everyone,
My debranded Western Europe UK C902 has just been updated to R3CA033
Here is the customisation code:
1208-6209 R1A
1204-8246 R3CA033 1E0W
I thouht this was only for O2? Apparantly not!
Tom
--
Posted: 2008-07-31 11:38:47
Edit :
Quote
New Topic
Reply
