>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> C902 camdriver
Bookmark topic
still waiting for some developer to enhance the excellent work of eltoffer. Greetings
--
Posted: 2009-07-03 20:25:03
Edit :
Quote
On 2009-07-02 17:10:53, lipe wrote:
hummmm i donīt know guys.
i prefer wait for something better
good job to all
[ This Message was edited by: lipe on 2009-07-02 16:11 ]
Mmm again you????dont expect to much from this phone, it is not the best you wont get better pics than these, so no way guy...
use these drivers or save some money to get a better phone
--
Posted: 2009-07-04 10:54:12
Edit :
Quote
On 2009-07-04 10:54:12, eltoffer wrote:
On 2009-07-02 17:10:53, lipe wrote:
hummmm i donīt know guys.
i prefer wait for something better
good job to all
[ This Message was edited by: lipe on 2009-07-02 16:11 ]
Mmm again you????dont expect to much from this phone, it is not the best you wont get better pics than these, so no way guy...
use these drivers or save some money to get a better phone
Hey whats your problem?
c902 is a good phone and I use what I really like... so
For me c902 is better and i donīt need your advice.
--
Posted: 2009-07-04 14:06:02
Edit :
Quote
avaliable: v51.46_Slideshot c902
Download:#2post
--
Posted: 2009-07-17 17:56:31
Edit :
Quote
finally you posted it, Brazzuka
thanks
im testing it right now
--
Posted: 2009-07-17 19:25:48
Edit :
Quote
Wowwww, going to install now
--
Posted: 2009-07-18 04:46:59
Edit :
Quote
On 2009-04-01 18:23:49, brazzuka's wrote:
@geele76
first have to know the register that enable forced led flash in c902.
Forced Led Flash:
#SET_REG(91,XX) => Forced Flash ???
XX=01 to 04 failed
XX=13 failed
XX=05 to 12 test
ISO for c902 (only work without Led Flash)
#SET_REG(61,XX)
XX=01 to (n)
ISO Led Flash for c902
#SET_REG(95,XX)
XX=01 to (n)
Second
When the LED FLASH (on) turn off disable colors correction WB
LED FLASH (off) turn on enable colors correction WB
Colors correction:
Colors correction WB normal
Colors correction LED FLASH
hey, after installing I dont see mannual contrast, or sarturation, or EV... ??? where are they ? how to use ?
besides, I dont have the new graphic interface ? although i copied the language file "en.lng" to the right place ? whats wrong ?
i have the C902 with R3EA038 main china, FS APAC ? should I flash it to Main Generic ?
--
Posted: 2009-07-18 15:46:12
Edit :
Quote
On 2009-07-18 15:46:12, MrHieu wrote:
On 2009-04-01 18:23:49, brazzuka's wrote:
@geele76
first have to know the register that enable forced led flash in c902.
Forced Led Flash:
#SET_REG(91,XX) => Forced Flash ???
XX=01 to 04 failed
XX=13 failed
XX=05 to 12 test
ISO for c902 (only work without Led Flash)
#SET_REG(61,XX)
XX=01 to (n)
ISO Led Flash for c902
#SET_REG(95,XX)
XX=01 to (n)
Second
When the LED FLASH (on) turn off disable colors correction WB
LED FLASH (off) turn on enable colors correction WB
Colors correction:
Colors correction WB normal
Colors correction LED FLASH
hey, after installing I dont see mannual contrast, or sarturation, or EV... ??? where are they ? how to use ?
besides, I dont have the new graphic interface ? although i copied the language file "en.lng" to the right place ? whats wrong ?
i have the C902 with R3EA038 main china, FS APAC ? should I flash it to Main Generic ?
mannual contrast, or sarturation, or EV = inside camdriver you can change the functions and the values.
Customize settings for c902
All settings and functions are modified within inside of the camdriver in automode and scenes.
In camdriver is a part called "customize" where are the "functions settings", it puts the values that you want for each scene.
find this line in scenes mode
example: scene sports
seq_set_prop_10_6 = // Sports
#COM_EVENT(06,01) // Exposure
#COM_EVENT(55,02) // Contrast
#COM_EVENT(56,01) // Sharpness
#COM_EVENT(54,00) // Brightness
//#SET_REG(61,00) //ISO auto
#SET_REG(AD,00) // Reset flash pulse width control flash
#COM_EVENT(XX,YY) = (YY) change this values to hex
Color Saturation and Colors correction:
Led Flash-On -> Color Correction ON!
Led Flash Off -> Color Correction OFF!
About Colors Correction:if necessary "user" you can change the values for the colors correction.
Look the table colors corrections below.
Find this line in inside of camdriver0.dat and change the values always in numbers hexa.
=====================================
WB_CC =
#SET_REG(66,yy) =>change (yy)
#SET_REG(65,xx) =>change (xx)
$p5 10
$c5 00
#COM_EVENT(58,07) =>>>> color saturarion change if necesary
$cl
#COM_EVENT(58,02) =>>>> color saturarion change if necesary
$cx
#COM_EVENT(13,01);
about interface language look:
Files *. lng (language)
Should be placed in this folder:
TPA \\ PRESET \\ SYSTEM \\ LANGUAGE
Drag and drop the files "pb.lng" and "en.lng" or other language folder above.
--
Posted: 2009-07-18 18:06:59
Edit :
Quote
brazzuka's Thanks by the the drivers. works fine with both w902 and c902.
Waiting for maybe super manual functions for this models w902/c902.
I appreciate the job of all modders and you.
--
Posted: 2009-07-19 17:04:17
Edit :
Quote
On 2009-07-19 17:04:17, lipe wrote:
brazzuka's Thanks by the the drivers. works fine with both w902 and c902.
Waiting for maybe super manual functions for this models w902/c902.
I appreciate the job of all modders and you.
And why attack Strong's work?
--
Posted: 2009-07-19 18:14:07
Edit :
Quote
New Topic
Reply
