News Forum Phone database

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Symbian phones > How To Sync P910i With iSync (Solution) (Updated for 10.3.8) Bookmark topic

I was syncing fine with Mac OS X 10.3.8 and my p910a. Now after upgrading to Tiger, iSync has wiped all of my tasks, address book and iCal entries from my phone. HELP!
--
Posted: 2005-06-07 23:10:09
Edit : Quote


Just spoke with Apple support in Sweden. They acknowledged a known problem with p900 and tiger. FYI I worked through the bluetooth connection probs until my p900 finally shows up as a P900 with device=phone. But now isycn says "P900 - Device not supported by isync" (or similar).
They said an update would be out "soon" and would not specify further.

--
Posted: 2005-06-20 11:57:46
Edit : Quote


Hi. I used to have a P900, and that synced fine on iSync 1.5 using the hack. Now I got a P910i, and I'm giving my P900 to my wife. I removed my P900 in iSync, reinstalled the standalone iSync 1.5, then added the P910i (as iSync will not allow 2 smartphones!), and got it to sync okay (no hack needed), except there's no icon of the P910i in iSync, but I can live with that. My wife has her own account on my Powerbook, so she has her own Address Book, etc. Will I be able to sync her P900 using her iSync? I'm thinking I need to hack her iSync for her to be able to sync her P900, but if I do that, will it affect my own iSync settings for the P910i? Or is her iSync totally different from mine? Thanks for the help! You guys are great! BTW, I'm still on OS X 10.3.9.

[ This Message was edited by: sexybeast on 2005-06-20 15:53 ]
--
Posted: 2005-06-20 16:51:51
Edit : Quote


Well, I finally installed Tiger on my Powerbook and my P910i now works well with iSync. It installed a SIS file that after installation becomes iSync Config, which must be run for iSync to see and synchronize the P910. However, the P900 now doesn't work! iSync says it isn't supported, and I haven't found a hack yet that would make it work. I've read about some people though being able to use iSync on their P900, but for the life of me I can't figure out how they did it.

[ This Message was edited by: sexybeast on 2005-06-25 22:55 ]
--
Posted: 2005-06-25 23:49:23
Edit : Quote


Still have not managed to get isync 2.0 (Tiger) to sync with p900. Note that isync 1.5 wont install in tiger, so I'm at a dead end. Anyone managed to get p900 working with isync 2.0? Any help greatly appreciated! OR, if you have similar experience, how can we pressure apple to solve this? (see my post above)
--
Posted: 2005-06-27 09:57:05
Edit : Quote


My thanks in wild profusion! Worked just fine for me, twice! (Appears losing pairing got another default plist written over - just edited it with BBEdit and back on line)
--
Posted: 2005-06-28 08:54:49
Edit : Quote


Hi Lawrence,
It seem that the mac sync system (isync) works for some, but not for all.
I cannot sync my p910 with my tiger. It is frustrating.
It appears : " The connection was lost while getting the changes from the device.
Device "P910a" synchronization failed"
And in the phone it appears:
Program closed
Motive code: USER
Motive Number : 11
iSync Agent Stopped

My connection works perfect. I use my Powerbook to surf the internet using the phone as a modem via bluetooth and GPRS, I can transfer files from the PB to the p910, everything works great. Everything but isync.
Any help would be appreciated,
Thanks in advance,
Luis
--
Posted: 2005-07-14 05:32:48
Edit : Quote


I often find with my P910i (OS 10.2) that Isync wont work (says it cant connect), but if I shutdown the phone and restart it, it works fine.

I'm not sure if this is relevant to your Tiger problem, but it cant help to try.

Dunder
--
Posted: 2005-07-14 06:37:58
Edit : Quote


Listen people, sorry, I have been absent from this forum for a while... Could you when you have problems please press apple-2 when you have isync open. This will open the log file. When the problems occur, the errors will appear in RED. Please post the contents of these along with any error messages on the phone or otherwise on the computer on here? It helps a lot
Thanks people!!
If you are having connection issues, please open isync config on the phone, and click isync in the menu and STOP the agent from running. Then restart it by clicking isync menu and then start.
If you are using an EXTERNAL bluetooth adapter, please UNPLUG it and plug it in again into a DIFFERENT PORT.
Thanks guys
--
Posted: 2005-08-31 00:30:21
Edit : Quote


Hi Using 10.4.2. sync of calendar always fails with the phone showing:
Program closed, reason code Agenda model, reason number 10

The log shows:


10:12:07 Connecting to P910i

10:12:07 Device "P910i" connected

10:12:07 Receiving changes from "P910i".

10:12:08 "P910i" finished receiving changes

10:12:09 "P910i" Processing changes...

10:12:10 Error Cannot connect to the device. Device not found.

10:12:10 Error Device "K700i" synchronization failed

10:12:16 Error Cannot connect to the device. Device not found.

10:12:16 Error Device "P900" synchronization failed

10:12:17 "P910i" engine processing complete

10:12:17 Applying changes to "P910i"

10:12:23 "P910i" applying changes complete

10:12:26 Error The connection was lost while sending some changes to the device.

10:12:26 Error Device "P910i" synchronization failed

10:12:26 [Mac -> P910i] Calendar events changed: 2 added, 0 modified and 0 removed

Any advice?

Thanks

--
Posted: 2005-10-06 10:19:45
Edit : Quote

---

New Topic   Reply

Forum Index