Sony Ericsson / Sony : Software, Firmware and Drivers : Super camera driver for k750/w800/w810
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Super camera driver for k750/w800/w810
Bookmark topic
On 2007-03-13 14:13:39, comhank wrote:
Great!
this picture is v good for me
natural colours, sharpness etc
--
Posted: 2007-03-14 08:03:42
Edit :
Quote
On 2007-03-14 04:24:26, comhank wrote:
@Resonantz
@wizake
my w810 used camdriver 8.8 simple
what is this 8.8 simple driver? I can only find three versions or 8.8: 9.0,7.7final and 7.7fedited. the fourth that i know of is the old GXG based driver.
--
Posted: 2007-03-14 09:51:49
Edit :
Quote
On 2007-03-06 17:20:35, mladen750i wrote:
Thanks to Cheng Rong, Paparazy and GxG, i made fusion and implementation of best driver functions in one driver, of mentioned people..., which should be suitable for those who have cid49 phone headset (k750 - especialy maded after may 2006 and w810, probably works on w800)...
Driver named version is 8.8, because of all changes...
As you can see, basics of this driver is super mode functions, and there for functionality is still same. Changes are listed below:
1.If you don`t like Super mode, you will just use default scene, which is almost same like GxG driver... Only differences is that you must ON macro for zooming...
2.If you like Super mode and Enhanced night function (long exposure), you will use that function going on 1.1 scene...
3.Scences is little changed, removed and rearanged... Below is they places...
4.Moving throw scences is much faster...
Supported 7 Scences:
1.0 GxG (Default)
1.1 Enhanced Night
1.2 Document
1.3 Portrait
1.4 Beach/Snow
1.5 Nightscene
1.6 Sports
1.7 Landscape
Link for download:
http://s2.quicksharing.com/v/8194676/camdriver0.rar.html
or if don`t work...
http://www.filefactory.com/file/5dd625/
UPDATED:Changes will increase jpeg size, which in most cases produce better quality of pictures, because of less compression... That`s a fact...
Spot photometry enabled...
For people who don`t care for jpeg size, which is increased, but in order to care for better quality, here is the link...
Link for download:
http://www.filefactory.com/file/2863fc/
Enjoy...
Best regards
Mladen
[ This Message was edited by: mladen750i on 2007-03-07 16:27 ]
@guguly
I'm download camdriver8.8 from this post
[ This Message was edited by: comhank on 2007-03-14 11:47 ]
--
Posted: 2007-03-14 12:43:45
Edit :
Quote
@comhank:
ok. so, that's the gxg based driver you're referring to...
thanks.
--
Posted: 2007-03-14 12:48:04
Edit :
Quote
i moded Cheng Rong's 8.53, it took me few days but it was worth it
- Fixed: macro + nightmode iso100 lock (dark preview) after shot
- Smooth preview (maybe too smooth :/)
- No AE Lock - it was pissing me off :/ (option)
- Almost correct white balance with Xenon Led's ON (only little blue, in my opinion its much better than yellow
)
- Profiles available only when macro is ON = smooth chengrong's zoom default ON when entering camera
BUGS:
- Sometimes camera is turning off after long exposure in enhance night and picture is not saved
http://www.rogepost.com/n/2519911562 http://www.rogepost.com/n/2920929214
http://www.rogepost.com/n/1040457160 http://www.rogepost.com/n/9782776512
Normal Mode:
Night Mode (Enhanced Night Mode is Default Enabled):
Night Mode + Profile 1.3 (=Default Night Mode):
Maybe tomorrow i'll try to make normal nightmode default and enhance night mode as profile
wish me luck.
i made it! (see page 49)
[ This Message was edited by: Kriomag on 2007-03-17 19:13 ]
--
Posted: 2007-03-14 12:53:44
Edit :
Quote
now, i used 8.8 driver with GxG (Default) ,i think it is good. Night, i got very good pictures.
I have w810i
[ This Message was edited by: Resonantz on 2007-03-14 18:15 ]
--
Posted: 2007-03-14 18:35:14
Edit :
Quote
@mladen
Thanks for the great driver.
I tried your driver 8.8 with 7.7 edited base. When you take photos with the LED falsh. in the default night mode. it works fine. but in enchance night mode. when I have the LED falsh on the pics turn out way too blue. (this was done in a romm with no light.)
are you able to fix the White balnce for enchanced night mode (1.1)?
--
Posted: 2007-03-14 20:42:15
Edit :
Quote
On 2007-03-14 20:42:15, dennis.l wrote:
@mladen
Thanks for the great driver.
I tried your driver 8.8 with 7.7 edited base. When you take photos with the LED falsh. in the default night mode. it works fine. but in enchance night mode. when I have the LED falsh on the pics turn out way too blue. (this was done in a romm with no light.)
are you able to fix the White balnce for enchanced night mode (1.1)?
I have the same problem in 8.53 mixed with 7.7 Edited :/
--
Posted: 2007-03-15 15:56:06
Edit :
Quote
Hi
Please help, what is the best driver for a w810i with the zoom of 16x, the 8.53 version has a bug, cause i cant take a lot of times pictures, in my screen there is an still green circle during a big time and sometines makes a sound "pi-pi"
And i have to go out and to go in. With MS car and without it.
why?
--
Posted: 2007-03-15 22:37:50
Edit :
Quote
which is better the super cam driver or mladen750i or paparatzi's driver??
--
Posted: 2007-03-16 06:04:15
Edit :
Quote
New Topic
Reply
