News Forum Phone database

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > fMA f[??] Mobile Agent, software for sms and phone monitoring Bookmark topic

@floAt @crino @GOwin

I am very new here. I just came across your Great FMA a couple of days ago. Excellent program with a great user interface!! Congratualtions and thank you for the public service.

FMA 0.0.9.9 appears to work in my setup T68i (R6A012) / W2K with extrnal SigmaTel USB-Irda dongle (no other setups or customizations!). You may wish to add this usb/irda to the list of working items on your fma website.

I assume in the battery status, the 'current charge' is the net current going into the battery and 'consumption' is the total from the charger used by the phone and the battery? Where can I find precise specs of what these items are and other such information that may be available from the phone thru that interface?

I noticed the following problems: Under some conditions (perhaps after some error in data transfer), it fails to reconnect. If the connect on start and reconnect are enabled, even if FMA is restarted it does not reconnect; but if those two are disbaled, and then FMA restarted, it reconnects fine. When connected, even if the IR beam is blocked, it reconnects fine when ir is avilable again.

_________________
Cordially, CqFma

[ This Message was edited by: CqFma on 2003-08-04 21:09 ]

[ This Message was edited by: CqFma on 2003-08-04 21:10 ]

[ This Message was edited by: CqFma on 2003-08-05 05:59 ]
--
Posted: 2003-08-04 19:15:54
Edit : Quote


fMA development credits goes to float and crino.

I'm just an end-user like you
--
Posted: 2003-08-05 04:42:56
Edit : Quote


I can't connect T610 to FMA via bluetooth (billington) but FMA can connect via Irda but can't synchornize phonebook and sms.

I can connect to PC Control and other application like theme editor etc... via bluetoothso i don't think it my bluetooth dongle problem. perhap it's due to "microsoft bluetooth driver" i've search for is driver for almost 1 week but still no luck of getting it. FMA also mention about ms script where can i get all this to get FMA connect to my T610.

I really hope to have a try on FMA. If anyone on esato that can helpout please post it on esato. Thanks in advance

[ This Message was edited by: kayla on 2003-08-05 16:40 ]
--
Posted: 2003-08-05 17:38:53
Edit : Quote


Hi

Installed fma today. works fine except few small errors. First when i connect to phone (via com3, i have msi bluetooth). i get error message. +CMS ERROR 303 . I looked at sourceforge but couldnt find any faq or any other explantion of this error.

When i hit "Start Sync Phonebook" all numbers where synced but at the end i recieved "sync error" (or something like that) by watching at log i saw that all numbers where synced anyway. if i hit sync again i get "Error: Synchronize aborted" , phone says "Synchronization finished". Any hints why i recieve this?

btw in case you already explained this once, sorry, i just didnt have enough time to read all 37 pages of posts....
--
Posted: 2003-08-05 22:17:49
Edit : Quote


Hi,

Who are the script experts here for FMA?! Is it possible to write a script function to get the output of an AT command and then display it on the phone, when a phone menu item is activated? If this is possible, can somebody show a small sample of this, so that I can add my own script function to do this? Thank you very much!

What I wish to do is try to display the %capacity fo the battery on the phone, thur a menu item, similar to status -- or even better show the number in addtion to the little battery bar at the bottom.
--
Posted: 2003-08-05 23:36:58
Edit : Quote


Has anyone gotten this working with a T300?
my firmware is R1C and this is the info i get out of the debug window

19:45:45:650 Connecting...
19:45:45:650 Connecting via Serial
19:45:45:869 Discard shit:
19:45:45:869 [TX] ATI
19:46:00:869 Disconnecting...
19:46:00:869 Connection Error
--
Posted: 2003-08-06 01:56:21
Edit : Quote


@* can fma work on a nokia? This message was posted from a Nokia
--
Posted: 2003-08-06 03:30:30
Edit : Quote


@kenski
nope, it doesn't work with those phones.

@CqFma
does it have to be a script for fMA? you can connect to your phone via window's hyperterminal, and see the results of AT commands you send to your phone.

you might want to try the BtserverSpylite (a widcomm stack utility). I'm not sure if it works for your BT dongle thou.

@kayla
could the brand be billionton instead of "billington"

fMA doesn't rely on MPM, unlike the apps you mentioned. Check your MPM options in the control panel, the BT com port might have been set for MPM's exclusive use (reserved), or some other app is using the same port you set in your fMA configuration.

re ms script control. you only need it if you use win98


--
Posted: 2003-08-06 04:03:32
Edit : Quote


Quote:
On 2003-08-06 01:56:21, daemorok wrote:
Has anyone gotten this working with a T300?
my firmware is R1C and this is the info i get out of the debug window


Works great with T300 R1G , Ir and cable(serial and USB)
--
Posted: 2003-08-06 06:12:11
Edit : Quote


Quote:
On 2003-08-05 22:17:49, blahblah wrote:

When i hit "Start Sync Phonebook" all numbers where synced but at the end i recieved "sync error" (or something like that) by watching at log i saw that all numbers where synced anyway. if i hit sync again i get "Error: Synchronize aborted" , phone says "Synchronization finished". Any hints why i recieve this?



I get exactly the same error here also. T68i/R6A012 on W2K (see my setup a couple of posts earlier).
--
Posted: 2003-08-06 15:44:14
Edit : Quote

---

New Topic   Reply

Forum Index