Sony Ericsson / Sony : Software, Firmware and Drivers : Super camera driver for k750/w800/w810
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Super camera driver for k750/w800/w810
Bookmark topic
@terminator: So it doesn't work well on w810i.
Thank you for ur test. Please use 8.5 or others for the time being.
@Edux: Thank you for your test as well. Is your phone d750i cid36? After you install the driver, please restart your phone and wait for a while then start to take pictures. If still get crash problem please use 8.5 or others until the next driver come out.
@Is there anyone has k750i cid49 tested this driver
--
Posted: 2007-10-03 10:20:26
Edit :
Quote
On 2007-10-03 09:24:11, EduX wrote:
A4A 8.8 after second shot (close distance, macro off) crashed
.
Preview and scrolling the pic at 4xzoom is too slow (maybe because of compression)
Problem is found
. It crashed bcz of the focus. Right now i am at the college so I cant edit my driver but when I am at home I will fix it. At least we know the cause
Sorry of letting you down
_________________
To be or not to be !!!
Please save our world. Save our world to save our lives and our generation.
There is no place as good as your house with your family. Home sweet home.
[ This Message was edited by: lpachuong on 2007-10-03 09:44 ]
--
Posted: 2007-10-03 10:36:18
Edit :
Quote
@Raiderski
Hey buddy, are you still here?
Today after small modifying 6.6 I installed it into my phone.
Some tips:
WB for pics with led will have much more real colours with adding WB_LED_SET=#CMD(11,04);
I am very disappointed with exposure compensation
Did you think about swapping functions between zoom and joy buttons? Or in no-macro-mode EV compensation could work with joy???
One question: What is the real difference between adjusting EV comp. and Brightness? Is it the same?
All other things are absolutely OK. Thanks!
Marcio
K750i CID49brown R1DB001
--
Posted: 2007-10-03 10:39:16
Edit :
Quote
On 2007-10-03 10:20:26, lpachuong wrote:
@terminator: So it doesn't work well on w810i.
Thank you for ur test. Please use 8.5 or others for the time being.
@Edux: Thank you for your test as well. Is your phone d750i cid36? After you install the driver, please restart your phone and wait for a while then start to take pictures. If still get crash problem please use 8.5 or others until the next driver come out.
@Is there anyone has k750i cid49 tested this driver
when did i say it didnt work...saving time,is faster than 8.5..only file size is lower..
--
Posted: 2007-10-03 11:10:05
Edit :
Quote
@Ipachuong.
Ok i'll check it now... give me a half hout for test and post my comment and post some photos
uuu u know.
at 1 colors are not so bad.. i think its real colors
2 i have crash when i try try make photo of wall of building against to me
quality are good
that photos have 595,2 kb
3 still noise ( i hate it) There is more noise than on photos taken with strong (
)
[ This Message was edited by: Milu on 2007-10-03 12:07 ]
--
Posted: 2007-10-03 12:56:43
Edit :
Quote
@dukempg: did you get crash with MXE-60. I forgot to mention that bcz of the high compression in the second step, MXE-60 may not work in some cases and also my driver has EM On. 8.8 is not created for MXE-60 bcz if it is decided for MXE-60, the second compression will be lowered to 50%. If the phone is setup at 98% and get crashes, the pictures will be save at 50% and this is very bad.
Yes, it crashed with MXE-60 at quality Normal, Quality Fine it didn't crash but the picture was taken out of sync with the flash so it came out dark. Well too bad it can't be designed to work with MXE-60
I like MXE-60 because I take a lot of night pictures of friends and people tend not to stay still lol
I replied your PM
[ This Message was edited by: dukempg on 2007-10-03 13:21 ]
--
Posted: 2007-10-03 14:04:55
Edit :
Quote
@Ipachuong, I've just tried your new driver and I've found that in macro mode it doesn't zoom in propertly. I can't get zoomed preview before shot when i half-press button. My phone is k750i CID49 R1CA021. Sorry for my English. I've used fine mode.
--
Posted: 2007-10-03 15:41:46
Edit :
Quote
On 2007-10-02 23:38:05, lpachuong wrote:
A4A-8.8 - All in One [New code - Test 1]
http://www.mediafire.com/?2be9mbe2ykm
Hello everyone. Here comes A4A-8.8. In this version, I created the driver for 3 modules. Because I don't have much free time to test it so I put them together. There may be some minor problem but as it is based on the new code, I hope everyone can help me find out bugs and problems. Thank you.
When you test it, please tell me:
- Your camera module: cid49/cid36/w810i
- If you have w810i, please tell me the size of the pictures and its ISO (80 or 100)
- If you have k750/w800 cid49, please make some comments on the colours and sharpness
- Do you get crash or not? Because the is the first test, I setup highest compression is 98% and lowest compression is 94% so there maybe crash. If there is no crash then the compression is good then.
------------------------
- Zoom + infinity focus is available now
- Video recorder is smoother than 8.5
- Always use fine-quality
- Macro off for normal focus
- Macro on for enhanced focus (like before but from zoom 1.1, viewfinder will be zoomed in)
- EM is always on
------------------------
Hope you enjoy it and I am waiting for your comments.
Actually, about the compression, I based on SPU's compression method and make some changes to improve it to make it suitable with my driver (As I used Raiderski's Profile Code as my pre-defined profiles). Anyways, thank you SPU and Raiderski and friends here.
------------------------
Good night
New driver for test, thanks Ipachuong
--
Posted: 2007-10-03 16:47:24
Edit :
Quote
@moonmoth
you can use zoom preview when macro on (read addition function from SPU instruction).
@lpachuong
I'm use K750i CID49 with W800i R1BC002 Firmware. Today I'm found camera crash when use fine mode in some shot.
I like your 8.8 because your 8.8 have EM while SPU1.3b9 don't have. My point is your should add SPU instruction in your 8.8 instruction for who never use SPU1.3 before.
again. sorry for my bad english.
--
Posted: 2007-10-03 17:37:39
Edit :
Quote
too many changes in 8.8
since is a new code I can't understand the code at all
--
Posted: 2007-10-03 21:06:12
Edit :
Quote
New Topic
Reply
