News Forum Phone database

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > Super camera driver for k750/w800/w810 Bookmark topic

So that value is still high for w800i cid36? Howabout colour/noise and sharpness? Please try this sharpness before you change it back to 00

Could you please do me a favour?

Here is the code for exposure:
EM= $p1 0d
$c1 00
$p1 0e
$c1 00
05 01 00 23 01 $f $r2 1 1
$m0 1 $/0 28
$c0 00
$m0 1 $/0 03
$c0 00
$cl
$s0 3F $-0 r1
#CMD(04,$w0)
$cx
$cx
$cx
$cx;

Please change the value of 3F to 3d or 3e. I am waiting for your reply. Thank you.
_________________
To be or not to be !!!
Please save our world. Save our world to save our lives and our generation.
There is no place as good as your house with your family. Home sweet home.

[ This Message was edited by: lpachuong on 2007-10-20 16:05 ]

[ This Message was edited by: lpachuong on 2007-10-20 16:16 ]
--
Posted: 2007-10-20 17:02:56
Edit : Quote


A new great driver. Everything is fine so far. Exposure is lower than the previous driver but I tested with value 3e, I found it is very good and bright enough. Your driver doesnt give exact value of shutterspeed as raiderski is it bcz raiderski's doesn't have EM on whereas your driver always has EM on?
--
Posted: 2007-10-20 17:20:05
Edit : Quote


@lpachuong
Using 3D:

EV 1.0 Zoom 1.1 Dark subject: Exposure 1/500 ISO 100
EV 1.0 Zoom 1.1 Bright subject: Exposure 1/1600 ISO 100
EV 1.0 Zoom 1.2 Dark subject: Exposure 1/400 ISO 100
EV 1.0 Zoom 1.2 Bright subject: Exposure 1/1600 ISO 100

Using 3E

EV 1.0 Zoom 1.1 Dark subject: Exposure 1/500 ISO 100
EV 1.0 Zoom 1.1 Bright subject: Exposure 1/1250 ISO 100
EV 1.0 Zoom 1.2 Dark subject: Exposure 1/400 ISO 100
EV 1.0 Zoom 1.2 Bright subject: Exposure 1/1000 ISO 100

Edit: Ridersky driver can get this value correct all the time, but ISO varies... Maybe there's some tip there? I'll do some tests on color and noise, but this is harder to compare since is more subject

[ This Message was edited by: dukempg on 2007-10-20 16:32 ]
--
Posted: 2007-10-20 17:29:16
Edit : Quote



You can disable EM by changing Picture Quality to Normal. BTW all my tests were done with EM off.
EDIT: Tested with EM On, same results.

[ This Message was edited by: dukempg on 2007-10-20 16:47 ]
--
Posted: 2007-10-20 17:38:31
Edit : Quote


I know lpachuong's driver has slower shutterspeed but his driver always produce iso 100 which is good and better than other values of iso. I have tested 3d as well but it is quite dark in low light condition, 3e is the most suitable value.
--
Posted: 2007-10-20 18:29:29
Edit : Quote



I agree that it's always better to use ISO 100. The point is that the EV 1.0 were supposed to give fixed Shutter Speed values (i.e. Zoom 1.1 shutter 1/5000, Zoom 1.2 shutter 1/2500 etc) and this is not working like that. I would like this to work to try a manual shutter speed guide that has been posted by cronos555. But I am not aware if it's technically possible to pinpoint the shutter speed while keeping ISO fixed in 100.
--
Posted: 2007-10-20 18:56:04
Edit : Quote


Does someone know how to get rid of shaky hands? =)
--
Posted: 2007-10-20 19:27:00
Edit : Quote



Natural answer would be: "get a tripod" The problem is to find a tripod that can be used with K750/W800. I have seen one on ebay:
http://cgi.ebay.com/SonyErics[....]eNameZWDVWQQrdZ1QQcmdZViewItem
But it only sells as a add-on for people that buy the K800 telescope... I have asked the seller if there was a way I could buy just the tripod but no reply

[ This Message was edited by: dukempg on 2007-10-20 18:41 ]
--
Posted: 2007-10-20 19:39:38
Edit : Quote


@lpachuong
Ok, I found out exposure is fine, as long as you keep your setting in something that makes sense lol. Here's what I did: pointed my camera to the sun, set shutter speed to 1/5000 (EV 1.0 Zoom 1.2 with lpachuong driver). Perfect, 1/5000 ISO 100 picture. Then I pointed a camera to a indoor place. Got a dark picture with ISO 100 and 1/400 shutter. Then I pointed the camera back to the sun, and increased the shutter speed to 1/3200, 1/2500 and so on (ev 1.0 zoom 1.3,1.4,...). Values came out perfect. So the shutter speed is working fine in normal photo situations. The problem is that I was trying to shot unreal situations just to test this feature, i.e., shoot indoor with 1/5000. This doesn't make sense in real life.
To shot shutter speed difference, I'll post the pictures of my test. Sharpness was disabled for better post processing so please take this in account. (=0)

Shutter 1/5000


Shutter 1/3200


Shutter 1/2500


Shutter 1/2000


Shutter 1/1600

Shutter 1/1250



Shutter 1/60


--
Posted: 2007-10-20 22:49:51
Edit : Quote


Hi,

I haven been trying out Raiderski Supermode 6.6. These pics have been taken with no configuration at all on the supermode, they were taken with default values. Judge for yourselves. (Max resolution 2mp)







--
Posted: 2007-10-20 23:05:31
Edit : Quote

---

New Topic   Reply

Forum Index