>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> K850 Firmware Overview
Bookmark topic
Same here, night pics are awful, they come out black if I use the flash unless with portrait and then they are either poor or tooooooooo bright.
--
Posted: 2008-06-14 14:39:53
Edit :
Quote
i advise to clean lightsensor frequently (use brush) to get better results with flash.
--
Posted: 2008-06-14 14:40:34
Edit :
Quote
On 2008-06-14 14:19:17, masada1971 wrote:
mine too..any solutions to this?even with iso set to 100,same again..too white pics
you need to use the compensation.
reduce the compensation with the keypad...
--
Posted: 2008-06-14 14:42:55
Edit :
Quote
On 2008-06-14 14:42:55, sblantipodi wrote:
On 2008-06-14 14:19:17, masada1971 wrote:
mine too..any solutions to this?even with iso set to 100,same again..too white pics
you need to use the compensation.
reduce the compensation with the keypad...
even on -2.0 i get over exposed pictures sometimse
--
Posted: 2008-06-14 15:06:22
Edit :
Quote
in that case your phone as some problem because my phone with compensation at -2.0 will never made a over exposed pictures.
--
Posted: 2008-06-14 15:17:40
Edit :
Quote
Clean your light sensor. It's been covered hundreds of times in this thread.
--
Posted: 2008-06-14 15:50:29
Edit :
Quote
On 2008-06-14 15:50:29, mark187 wrote:
Clean your light sensor. It's been covered hundreds of times in this thread.
I've done this 3x already but i'm not gonna take an old toothbrush with me every time i wanna take night pictures
[ This Message was edited by: Duran on 2008-06-14 15:07 ]
--
Posted: 2008-06-14 16:07:24
Edit :
Quote
On 2008-06-14 16:07:24, Duran wrote:
On 2008-06-14 15:50:29, mark187 wrote:
Clean your light sensor. It's been covered hundreds of times in this thread.
I've done this 3x already but i'm not gonna take an old toothbrush with me every time i wanna take night pictures
[ This Message was edited by: Duran on 2008-06-14 15:07 ]
Then get a different phone because the dirty sensor problem is an inherent flaw with the K850i.
--
Posted: 2008-06-14 18:20:56
Edit :
Quote
I have to say that I also got MUCH better results once I cleaned the sensor. I carry a tooth pick now and use it once in a while. I've thought about finding some sort of Very transparent tape to put over the sensor so it doesn't trap any dust but not sure if this would work.
--
Posted: 2008-06-14 18:30:21
Edit :
Quote
That's unusual... I can't seem to update my K850i 02 from R1EA031 to a later version using SEUS....
--
Posted: 2008-06-14 18:57:53
Edit :
Quote
New Topic
Reply
