Sony Ericsson / Sony : Software, Firmware and Drivers : Super camera driver for k750/w800/w810
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Super camera driver for k750/w800/w810
Bookmark topic
On 2007-12-13 12:29:22, Raiderski wrote:
riddle:
as we know command reg57 is HUE control. this reg is a bit strange, look:
of course we can reach range -127 - +127 without any problems but if command registers are signed 8bit then we are unable to go over 8bit limit. in this case ~70% of HUE table is unavailable for us
pity, don't you think?
the question is: how they (SE) resolved this? one more command reg to extend value? or maybe HUE control is corrupted? what do you think?
[ This Message was edited by: Raiderski on 2007-12-13 11:30 ]
is HUE #COM_EVENT(57,00)????, recommend me a value and i'll try it on the k800i
--
Posted: 2007-12-13 12:50:44
Edit :
Quote
Hi to wise camdriver modders!
I've found command $t0020 in camdriver.
There is no this command in I2C command list. What does this command mean?
It is just a curiosity...
--
Posted: 2007-12-13 14:49:58
Edit :
Quote
number1
maybe, i don't know how K800 is working. you don't have big choice in values, they are the same as in 2MP phones
679
exactly what this mean nobody knows but this looks like: "everything is ready, take snapshot and reprocess"
--
Posted: 2007-12-13 20:44:01
Edit :
Quote
i tried #COM_EVENT(57,09) i didn't notice any difference what is colour hue range of colours or something init.
--
Posted: 2007-12-13 21:25:08
Edit :
Quote
YES !!!
ALL CAM MODDER HAS COMEBACK !
YIPPIEEE.....!
--
Posted: 2007-12-14 03:41:42
Edit :
Quote
@Kriomag
Is there any manual for your latest 21.93 beta 1213?
--
Posted: 2007-12-14 04:12:00
Edit :
Quote
On 2007-12-14 04:12:00, pram_zx wrote:
@Kriomag
Is there any manual for your latest 21.93 beta 1213?
Its pretty the same as for 21.91:
--= Thx to Cheng Rong, Andeo & Raiderski =--
Kriomag v21.93 BETA
- Driver File Size 17kB
- Based on 7.7 Final
- Very sharp pictures in Day Mode
- Zoom with Manual focus! (Turn Macro ON and set focus, now turn Macro OFF and set Zoom)
- Light CC (in FINE Mode)
- EV- for VIVID or EV+ for quick WB change (Turn Macro OFF for normal EV change)
- 3 Video Recording Modes (Normal Mode= max 15fps, Night Mode= max 10fps, Night Mode + Macro= max 5fps)
- 2 Photo Modes (Picture Quality NORMAL: Default 7.7 Final, Picture Quality FINE: 7.7 Final + Automatic EM/ENM/LedEM/LedENM)
- Stable JPEG 89% (Normal & Fine Picture Quality)
- Manual Focus with Zoom Preview (Macro ON: 1.0 Autofocus, Manual Focus Range 1.1-4.0 with Zoom preview, 1.1 = Infinity, 4.0 = Macro)
- 3 Zoom Modes (Smooth Linear x16 for NormalMode VR, Linear x6 for NightMode VR, Linear x4 for Photo)
- AE Lock
- SPOT for Manual Focus (when Zoom Preview is enabled)
http://kriomag.4shared.com
Instructions:
Manual Focus:
Turn Macro ON.
When in range 1.1-4.0 (+/-) click half-shutter for zoom preview (you can ON/OFF zoom preview by clicking half-shutter),
now (when zoom is on) you can adjust focus very precisely (+/-),
when picture is most sharp you can:
- press shutter to take picture with SPOT (very useful with macro shooting)
or
- click half-shutter again (the zoom will go off and SPOT will be disabled)
and now press shutter to take picture. enjoy!
2 Photo Modes:
Picture Quality NORMAL:
- Normal Mode / Night Mode = Default 7.7Final
- Normal Mode / Night Mode + Macro = 7.7Final with Manual Focus
Picture Quality FINE:
- Normal Mode / Night Mode = Enhanced Mode / Enhanced Night Mode
- Normal Mode / Night Mode + Macro = Enhanced Mode / Enchanced Night Mode with Manual Focus
[ This Message was edited by: Kriomag on 2007-12-14 10:04 ]
--
Posted: 2007-12-14 09:17:24
Edit :
Quote
Thanx Kriomag...
--
Posted: 2007-12-14 10:31:35
Edit :
Quote
Hi Kriomag, Nice to see you back.
Can you plz upload your driver somewhere else? Like MySpace which is mostly accesible from anywhere.
Thanks.
--
Posted: 2007-12-14 10:43:23
Edit :
Quote
number1
values are on image. to slide across whole HUE table we need something like range from -400 to +400. value 9 in this case is nothing
--
Posted: 2007-12-14 14:38:56
Edit :
Quote
New Topic
Reply
