Sony Ericsson / Sony : Software, Firmware and Drivers : Super camera driver for k750/w800/w810
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Super camera driver for k750/w800/w810
Bookmark topic
Some pictures that I have taken with k750, using super camera driver 6.7:
[ This Message was edited by: degraaff on 2007-12-26 22:08 ]
--
Posted: 2007-12-26 23:05:36
Edit :
Quote
On 2007-12-26 11:20:01, Raiderski wrote:
leetiran
bug? where exactly? i don't see nothing strange. scene 04 in EM can be of course used but i had no free time to check how it's working. in EM code is shutter speed calculation from AE value, so scene 04 must be applied before calculation or after calculation. i have free time today and i will check this
[ This Message was edited by: Raiderski on 2007-12-26 14:04 ]
Not always, but so often. for example, The Exif should be ISO 100, 1s, but it shows ISO 800, 1/5s.
I think the scene 04 appliction after calculation will be ok. Because the shutter speed calculation is to make iso=100, and scene 04 iso=100.
[ This Message was edited by: leetiran on 2007-12-27 03:06 ]
--
Posted: 2007-12-27 02:44:06
Edit :
Quote
@degraaff
I see some blurry pictures, its out of focus on macro mode, why?
the driver or your hand shake?
_________________
W810i Black with W800 back cover, modded camdriver, Own mix acoustic driver, Unbranded phone, Adding new flash menu's. W810i It's Rock...!
[ This Message was edited by: pram_zx on 2007-12-27 04:01 ]
[ This Message was edited by: pram_zx on 2007-12-27 04:35 ]
--
Posted: 2007-12-27 02:57:15
Edit :
Quote
@W810i User
Sarmad has release
Sarmad 6.0, its only for W810, not for k750/w800 because the aggressive setting....
Go for it...
http://forums.se-nse.net/index.php?showtopic=20252
_________________
W810i Black with W800 back cover, modded camdriver, Own mix acoustic driver, Unbranded phone, Adding new flash menu's. W810i It's Rock...!
[ This Message was edited by: pram_zx on 2007-12-27 04:25 ]
[ This Message was edited by: pram_zx on 2007-12-27 05:31 ]
--
Posted: 2007-12-27 05:24:30
Edit :
Quote
Pictures taken from Raiderski v6.6.1 driver.
The 1st picture is taken from moving bus at 40 kmph
--
Posted: 2007-12-27 05:42:22
Edit :
Quote
Then I know what the meaning of aggressive settings mean by sarmad on
Sarmad v6.0
I ask:
@Sarmad
Just want to know, what compressione in normal and fine quality, is the same? is 95%?
Thanx B4 for your reply
Cheers...
Sarmad says:
The quality setting is at 100% in both normal and fine.
As before, Fine quality gives longer exposure than Normal.. that's the only difference between the two.
_________________
W810i Black with W800 back cover, modded camdriver, Own mix acoustic driver, Unbranded phone, Adding new flash menu's. W810i It's Rock...!
[ This Message was edited by: pram_zx on 2007-12-27 08:49 ]
--
Posted: 2007-12-27 09:36:47
Edit :
Quote
Sarmad 6.0 is the same as 5.8 apart from the fact that compression is at 100%. Therefore, the quality is the same. I dont understand what took him a long time to release a new version for just higher compression ???
--
Posted: 2007-12-27 11:22:52
Edit :
Quote
On 2007-12-27 02:57:15, pram_zx wrote:
@degraaff
I see some blurry pictures, its out of focus on macro mode, why?
the driver or your hand shake?
My hand shaked because it was cold outside
--
Posted: 2007-12-27 12:14:14
Edit :
Quote
Raiderski,
Thx a lot for new 6.7.
I try 6.7 after long sticking to 21.92 for K750 CID36. Of course i configure 6.7 to be most like 21.92. It was easy.
Also i adjust some lines in result driver to match my needs.
// ------------------------- CUSTOMIZE INITIALS
WORK_AS_STANDARD= $s0 02;
EM_IN_QUALITY= $-1 01;
SHARPNESS= 04;
BRIGHTNESS= 00;
CONTRAST= 00;
SATURATION= 04;
SATURATION_SS= 01;
EXPOSURE= $-0 09;
FILTERING= $s0 01;
AF_MACRO_SCAN_MODE= $s0 00;
FOCUS_PREVIEW_ZOOM= 08;
JQ_NORMAL= $s2 59;
JQ_FINE= $s2 5a;
Seem these lines are OK?
As i like fast shooting even with little noise, so i've changed
EM_RATIO_NORMAL= $s0 3b;
EM_RATIO_NIGHT= $s0 3b;
Than i have EM exposure up to 1/6 and ISO upto 500 with suitable noise.
and for ENM 1s max and ISO 160.
And i like max zoom for pictures 2X and for video 4X.
so my changing:
// digital zoom
ZOOM_PHOTO=$s0 46 $s1 %0 $-0 r1 $ZOOM_VIDEO=$s0 64 $
Thats all. And i enjoy with shooting but discovered one problem.
When i am in MACRO + zoom 1.1-4.0 i'm shooting without autofocusing. It is OK.
But when i turn off macro, and set zoom 1.0 i cant return to autofocus mode. Immediatly after shutter half-pressed i've got this green small frame. And even after swithing to VR mode the same effect.
Only after camera cover reopening i can use autofocus and zoom.
I cant connect my seems lite changes with this problem.
Does anybody have the same effect in 6.7?
THX.
--
Posted: 2007-12-27 13:37:04
Edit :
Quote
hi
leetiran
yep, exif problem confirmed. i know what is wrong
679
1. changes are ok
2. try this:
macro on, x1.1, macro off, x1.0 (AF probably isn't working at this moment), x1.1, x1.0 (AF should work)
give me results and send me your code at PM
so, 6.7.1 should be available soon, maybe today
--
Posted: 2007-12-27 13:57:24
Edit :
Quote
New Topic
Reply
