Sony Ericsson / Sony : Software, Firmware and Drivers : Super camera driver for k750/w800/w810
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Super camera driver for k750/w800/w810
Bookmark topic
ш can give you same elfs if you need... =)
--
Posted: 2008-01-08 05:43:19
Edit :
Quote
On 2008-01-07 18:32:13, lpachuong wrote:
On 2008-01-07 17:19:55, leetiran wrote:
I think the camera module which cant zoom in big size maybe not bad. Maybe it has different zoom funtion, it cuts picture from 1632×1224.
for example, in 640×480 size, when 1x, it takes in 1632×1224 and saves as 640×480, when 2x, it takes in 1632×1244, cuts 1280×960 of the pic and saves as 640×480, when 2.5x, it takes in 1632×1224, cuts 640×480 of the pic and saves. in 1632×1224, it only has 1x for this method. So the camera module can zoom 2.5x in 640×480, but cant zoom in 1632×1224.
If it is this method, the picture quality wont be bad when zooming.
it just my imagination, maybe is wrong
You are totally right. K750i can only save zoomed pictures at smaller size by edge-cutting (crop) from the originslly size (1632x1224). I remembered i complained about this a long time ago
It is useless to zoom at the size 640x480 as the pictures are too bad. However, w810i and cid36 can save zoomed pictures at any size. You are lucky and I hope this can end this discussion
_________________
To be or not to be !!!
Please save our world. Save our world to save our lives and our generation.
There is no place as good as your house with your family. Home sweet home.
[ This Message was edited by: lpachuong on 2008-01-07 17:39 ]
The other problem of the new cid49 maybe come from this reason that the camera module is a new one, but the driver is old. The new cid49 camera module is similar to K550's, maybe the driver or some commands of K550 can be used in new cid49. maybe someone would test it
--
Posted: 2008-01-08 10:13:07
Edit :
Quote
When I have free time I will test or you can test by urself by changing the I2C bus on k550 and use the correct properties for it.
--
Posted: 2008-01-08 10:16:09
Edit :
Quote
On 2008-01-08 10:16:09, lpachuong wrote:
When I have free time I will test or you can test by urself by changing the I2C bus on k550 and use the correct properties for it.
I cant do that because my camera module is the old one.
--
Posted: 2008-01-08 10:24:15
Edit :
Quote
One thing I should mention about zoom:
With original driver I could zoom only 2,5x at VGA resolution, but with modified driver I can zoom 4x at VGA.
No matter if zoomed picture size is VGA or is interpolated. If possible, let the driver saves zoomed pictures without interpolation.
I had many problems to crop taken pictures in the phone. It is depended on MIN MAX AVG quality values in camdriver, if values are not correct, it fails during saving the crop (of already taken picture without zoom).
--
Posted: 2008-01-08 12:03:48
Edit :
Quote
Kriomag it looks better and better on every pic but isn't there the overexposure problem in ENM,EM? And is the driver compatible with your configtool?
--
Posted: 2008-01-08 16:04:13
Edit :
Quote
Tomix
can you show pics with overexposure in EM/ENM?
--
Posted: 2008-01-08 16:28:08
Edit :
Quote
On 2008-01-08 16:04:13, Tomix wrote:
Kriomag it looks better and better on every pic but isn't there the overexposure problem in ENM,EM? And is the driver compatible with your configtool?
My configtool?
i dont have config tool...
Overexposure problem? i dont know - i had overexposed ENM picture once (and LedENM), but i dont know what caused it :/ but in 99% of cases there are no problems
--
Posted: 2008-01-08 17:25:03
Edit :
Quote
Guys, just wanna thank you all here for the awesome work. Here's are some pics of my models I took with Raider's latest 6.7.1. AWESOME!! EM+NM+Manual Focus.
--
Posted: 2008-01-08 19:50:15
Edit :
Quote
Anybody mind answering my question about the sharpness value for a cid49 with cid36 cam module.....?
--
Posted: 2008-01-08 20:40:00
Edit :
Quote
New Topic
Reply
