News Forum Phone database

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > FAR plugin for internal file system access using DCU-60! Bookmark topic

is it posible to roll back to previous firmware using FAR?
--
Posted: 2006-07-14 23:13:59
Edit : Quote


Gah, it still won't work. It picks it up, but shows 2 folders, one being FLASH and inside it just says "coming.soon" and the other is FS, but this folder is empty.

This is what I am doing:

1) Start FAR Manager and press F11 and select SEFP

2) I press "Enter the matrix" with DCU-60 selected, and k750i already selected by default on right hand side section of menu.

3) The screen instructs me to hold C and switch on the phone, with a timer. I do this, and it looks like the phone is picked up - a couple of lines of messages come up on the screen, such as CHIPID and what not.

4) Then it just goes to the screen with the 2 folders, FLASH and FS, both of which are empty.

5) Nothing works so i have to disconnect my cable, take battery out of my phone and restart it.

Is there any reason why it's going wrong? Anything i've missed from the above?

Cheers

[ This Message was edited by: alex_ncfc on 2006-07-14 22:57 ]
--
Posted: 2006-07-14 23:57:21
Edit : Quote


Quote:
On 2006-07-14 23:57:21, alex_ncfc wrote:
Gah, it still won't work. It picks it up, but shows 2 folders, one being FLASH and inside it just says "coming.soon" and the other is FS, but this folder is empty.

This is what I am doing:

1) Start FAR Manager and press F11 and select SEFP

2) I press "Enter the matrix" with DCU-60 selected, and k750i already selected by default on right hand side section of menu.

3) The screen instructs me to hold C and switch on the phone, with a timer. I do this, and it looks like the phone is picked up - a couple of lines of messages come up on the screen, such as CHIPID and what not.

4) Then it just goes to the screen with the 2 folders, FLASH and FS, both of which are empty.

5) Nothing works so i have to disconnect my cable, take battery out of my phone and restart it.

Is there any reason why it's going wrong? Anything i've missed from the above?

Cheers

[ This Message was edited by: alex_ncfc on 2006-07-14 22:57 ]


just try and try, plugging dcu-60 must be correctly done. sometimes the pins are so sensitive that it might not connect itself.

hope it will work. it works for me.
--
Posted: 2006-07-15 04:24:23
Edit : Quote


@alex_ncfc

Do you install Update driver properly ? EPIUSB.SYS and EPIUSB.INF
--
Posted: 2006-07-15 11:08:35
Edit : Quote


Quote:
On 2006-07-15 11:08:35, jefff wrote:
@alex_ncfc

Do you install Update driver properly ? EPIUSB.SYS and EPIUSB.INF


When I first plugged in my phone holding the C button, the PC came up with "Found new hardware - USB Flash Device" - it asked for the driver so I pointed it to the EPIUSB files you mention. I assume this is correct?

How do i go about properly installing them?

Cheers
--
Posted: 2006-07-15 12:14:18
Edit : Quote


I've just tried again soo many times, even using different USB ports as I read somehwere but the result is the same - just the two empty folders. Also, this is what happens when I select the FS folder - the box comes up for a short while, then it goes back to the empty folder


--
Posted: 2006-07-15 13:54:33
Edit : Quote


@alex_ncfc

Yes, it's OK.
I don't have any new ideas at the moment
--
Posted: 2006-07-15 14:29:08
Edit : Quote


I've just found out my k750i is CID49, whatever that means, so I can't use FAR. How gutted am I!

Oh well, thanks for all your help Jeff, and everyone else.
--
Posted: 2006-07-15 14:31:26
Edit : Quote


Quote:
On 2006-07-15 13:54:33, alex_ncfc wrote:
I've just tried again soo many times, even using different USB ports as I read somehwere but the result is the same - just the two empty folders. Also, this is what happens when I select the FS folder - the box comes up for a short while, then it goes back to the empty folder



Same problem here. Two empty folders come up when I connect to FAR. CID problems as some have pointed out. CID49 is still not supported. Still waiting though. Hopefully soon, Darkmen and co. can crack the CID49 code so we can also enjoy FAR.
--
Posted: 2006-07-15 14:31:54
Edit : Quote


@alex_ncfc
I see !
I think there is a way to change CID 49 to CID 36 - I'll try to find the posts
--
Posted: 2006-07-15 14:34:16
Edit : Quote

---

New Topic   Reply

Forum Index