Sony Ericsson / Sony : Software, Firmware and Drivers : Super camera driver for k750/w800/w810
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Super camera driver for k750/w800/w810
Bookmark topic
On 2008-02-17 18:46:45, recl wrote:
I've mentioned this problem since beta 01 but got no reply..what I know for sure..is that the EV options have been switched with the zoom buttons (+ -)
something like strong's driver (5.6)
now i use the original driver..
Yes, you are right. I already said sorry for not replying ur comments since I was so busy last week. At the moment, please dont care much about the EV and zoom features until you are used to them.What is important is that we all try to figure out good quality at the first stage then think about the functions. On the new driver (beta2), I hope it takes pictures more quickly than the beta 01. What I am working on the driver now is try to know more about the I2C bus of the camera. On the last driver, I have increased the voltage of Vdd_i0 and the bus was reduced to 12Hz but with longer period. This method will speed up the performance and reduce noise as much as it can. I have also found that we can use the camera driver to control the luminace (brightness) of the screen which will be useful (in camera mode, we can see better contrast on the viewfinder). Btw, my camera has got damage on its len (sun-burnt) so I cannot get 100% result. That is the reason why I want to hear your comments.
Excuse my english.
--
Posted: 2008-02-17 19:00:41
Edit :
Quote
On 2008-02-17 17:32:40,
lpachuong wrote:
Please take the heatsink out, use a brush and clean the dust. Go to the shop and buy the glue and stick it to the CPU again. I guess you computer is 2 years old (I may be wrong
heh - my fan is ok - i just removed it for dust cleaning
i use brush + vacuum cleaner.
My comp is not so old
last cleaning ~2months ago...
--
Posted: 2008-02-17 19:02:48
Edit :
Quote
if i change my firmware to the one you have..will i get the same bugs? or not
--
Posted: 2008-02-17 19:03:12
Edit :
Quote
On 2008-02-17 16:35:48, eXitman wrote:
the latest ;/ -macro / 1.1inf / fine
strange :/
I use the same version and everything is fine - how about previous versions?
--
Posted: 2008-02-17 19:04:46
Edit :
Quote
Anybody knows the highest iso w810i can do considering its hardware limitation?
--
Posted: 2008-02-17 19:45:52
Edit :
Quote
Kriomag W810i v1.0 BETA 2008/02/14
ENM + EV-0.7
ENM + EV-0.7 + LED
--
Posted: 2008-02-17 20:00:09
Edit :
Quote
On 2008-02-17 19:02:48, Kriomag wrote:
On 2008-02-17 17:32:40,
lpachuong wrote:
Please take the heatsink out, use a brush and clean the dust. Go to the shop and buy the glue and stick it to the CPU again. I guess you computer is 2 years old (I may be wrong
heh - my fan is ok - i just removed it for dust cleaning
i use brush + vacuum cleaner.
My comp is not so old
last cleaning ~2months ago...
I was joking mate
--
Posted: 2008-02-17 20:25:01
Edit :
Quote
hi im new here.. and i like to use the driver A4A_13.0_beta02 but i want to know what is EM and ENM?
th@nks..^_^
--
Posted: 2008-02-18 11:21:51
Edit :
Quote
On 2008-02-18 11:21:51, mauve08 wrote:
hi im new here.. and i like to use the driver A4A_13.0_beta02 but i want to know what is EM and ENM?
th@nks..^_^
EM = Enhanced Mode - modified Normal Mode to remove noise - longer exposure time and low ISO --> stady hand needed
.
ENM = Enhanced Night Mode - modified Night Mode to remove noise - veeery long exposure time an low ISO --> tripod + selftimer needed.
sorry for my english
[ This Message was edited by: Kriomag on 2008-02-18 13:44 ]
--
Posted: 2008-02-18 14:44:03
Edit :
Quote
Here my question: Is image quality of a new W810i better or should I stay with my K750i CID49 modde with CID36 cam-module?
Some impression from last week holiday shot with raider 6.6:
[img]http://www.esato.com/board/img.php?id=96406[/img
[ This Message was edited by: Randolph on 2008-02-18 13:48 ]
--
Posted: 2008-02-18 14:47:18
Edit :
Quote
New Topic
Reply
