Sony Ericsson / Sony : Software, Firmware and Drivers : Super camera driver for k750/w800/w810
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Super camera driver for k750/w800/w810
Bookmark topic
@Strong u can put in your new version Kriomag WB Balances
This is just idea
--
Posted: 2008-03-05 21:47:04
Edit :
Quote
Thanks Strong, but my phone always restarts when I turn off low profile. Thats with 5.8 and 6.0. Thank you, anyway.
I will try Sarmad's 5.8 as it has NM/FEM/SEM. I need a way to reduce noise on indoor pictures.
--
Posted: 2008-03-06 11:00:30
Edit :
Quote
@Kriomag
For K750 CID36.
A question for 21.93 using. For example in EM, MACRO=ON i've set custom WB (i.e. EV->0.7->EV->0.3). OK?
But also i want for this custom WB to set max SATURATION (EV->-2.0).
Seems it is impossible, coz when i set EV=-2.0 i pass throw EV=0.0, -0.3 and default WB will be set
.
Can it be done by other way?
Thx
--
Posted: 2008-03-06 11:47:10
Edit :
Quote
On 2008-03-06 11:00:30, ilidan wrote:
Thanks Strong, but my phone always restarts when I turn off low profile.
Me too..
--
Posted: 2008-03-06 11:54:30
Edit :
Quote
@SPU
You made a great driver, and put a new use to night mode in my cell (which I had abandoned for ages since I got my MXE-60). My question is about MXE-60: Can I increase the compression level? 50% is very low and because photos generally comes with noise, which is magnified by the compression
--
Posted: 2008-03-06 16:33:05
Edit :
Quote
dukempg
It's very easy. Open the driver and change value DF_MXE_JPEG_QUALITY in the Config section (default value is 32 = 50%). Don't set it above 75% because the MXE can be out of sync in this case.
--
Posted: 2008-03-06 18:31:25
Edit :
Quote
On 2008-03-06 18:31:25, SPU wrote:
dukempg
It's very easy. Open the driver and change value DF_MXE_JPEG_QUALITY in the Config section (default value is 32 = 50%). Don't set it above 75% because the MXE can be out of sync in this case.
Thanks a lot SPU! I'll keep it at 70% to be on the safe side. BTW, is there a way to have sharpness set at zero only for Night Mode and MXE-60? In this two cases a lot of noise by the sensor is produced and like to use Neat Image to remove the noise before sharpening when post-processing. This produces much better results IHMO.
--
Posted: 2008-03-06 18:45:23
Edit :
Quote
On 2008-03-06 11:47:10, 679 wrote:
@Kriomag
For K750 CID36.
A question for 21.93 using. For example in EM, MACRO=ON i've set custom WB (i.e. EV->0.7->EV->0.3). OK?
But also i want for this custom WB to set max SATURATION (EV->-2.0).
Seems it is impossible, coz when i set EV=-2.0 i pass throw EV=0.0, -0.3 and default WB will be set
.
Can it be done by other way?
Thx
it cant be done
ive never had need to use custo wb + max saturation
if You need this options combined i can replace normal EV change (when macro is off) to saturation change, then you will do like that: set custom wb -> turn macro off -> set saturation
i will think about improving this...
--
Posted: 2008-03-06 20:30:07
Edit :
Quote
On 2008-03-06 20:30:07, Kriomag wrote:
it cant be done
ive never had need to use custo wb + max saturation
if You need this options combined i can replace normal EV change (when macro is off) to saturation change, then you will do like that: set custom wb -> turn macro off -> set saturation
i will think about improving this...
Thx, in fact i set high (14) init saturation and semi-resolve this problem. Now it is color-poor scene around (due to the winter) so i need pick-up colours... In spring and summer i'll reduce saturation...
--
Posted: 2008-03-06 20:47:58
Edit :
Quote
@Strong
What is this for?
MACRO_ZOOM= 08; // 10=x4 - 20=x2 - 08=x8
Macro zoom for preview or the actual shots taken when macro is enabled.
--
Posted: 2008-03-07 08:52:12
Edit :
Quote
New Topic
Reply
