>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> C902 Firmware Overview
Bookmark topic
C902 seems to have been withdrawn from the O2 website. it is no longer showing on contract anymore. Only on prepay.
--
Posted: 2008-07-31 22:06:40
Edit :
Quote
On 2008-07-31 21:30:15, Rookwise wrote:
Just noticed Davinci has R3BA035 firmware for all regions for the C902 ????
Any info on this one ?
Wasn't that the intial release firmware ?? Seem to remember mine had that
and suffered the "reboot" problem !
--
Posted: 2008-07-31 22:17:29
Edit :
Quote
Sorry my bad. It was the initial release
--
Posted: 2008-07-31 22:25:56
Edit :
Quote
Got the JBenchmark scoores for R3CA033
JBenchmark 3D HQ: 430
JBenchamrk 3D LQ: 402
JBenchmark 2: 1008
JBenchmark 1: 7868
[ This Message was edited by: masterjonny8 on 2008-08-01 02:56 ]
--
Posted: 2008-08-01 03:56:28
Edit :
Quote
On 2008-07-31 16:31:58, Nath wrote:
I did all of that. Cheers. However...When I go to switch the phone on, I type in the PIN, and up pops a message 'Configuration error. Pleas contact your network operator or service centre'. I'm now worried that I may have voided any warranty etc. Any suggestions? After all the wife will have to take it back all that
I posted this yesterday, somebody please help!!!
--
Posted: 2008-08-01 09:52:15
Edit :
Quote
You've done something wrong when you flashed your phone.If you used the Davinci client. Did you make sure that the Finalise option was ticked.If you didn't put a tick in the box then your phone wouldn't have flashed properly and you get a Configuration Error prompt.
This message was posted from a C902
--
Posted: 2008-08-01 10:45:15
Edit :
Quote
I'm sure it was ticked as it is set as default. I think I may have found the problem.
When I connect I get this
Customization info:
1208-7428 R6A
1204-8246 R3BA035
VFE-LIVE-A
The first line relates to the vodafone CDA, which is strange because I flashed it yesterday with the debranded firmware, where as the middle line doesn't seem to be listed on the Davinci Client. Mabe there is a conflict there?
I've highlighted the line 'R3BH002 Customized UK/Luscious Red 1209 1706'. Do you think this will be ok? My fingers are ready to click! The finalized checkbox is definitely checked too. Anything else you think I need to do?
[ This Message was edited by: Nath on 2008-08-01 10:48 ]
[ This Message was edited by: Nath on 2008-08-01 10:50 ]
--
Posted: 2008-08-01 11:41:18
Edit :
Quote
Well I did it. All ok. Not sure what happened the last time, but this time it took 5 minutes not an hour. Thanks MasterJonny and Rockwise for your help, much appreciated
--
Posted: 2008-08-01 12:19:24
Edit :
Quote
Yes mate that should be fine if you have the Red C902.
The second line is correct for unbranded phones (1024-8246 Then the current firmware version)
It looks like your CDA customization hadn't been changed from Voda to Generic which was causing the configuration error.
You could have contacted Davinci customer support and explained what had happened. They should have given you a free credit due to the client not flashing your phone properly.
--
Posted: 2008-08-01 16:44:31
Edit :
Quote
for all those who have the c902 would you say it would be best going for this handset if i have had the k850i, or am i going to have the same problems with this handset that i did with the k850i?
--
Posted: 2008-08-02 11:18:42
Edit :
Quote
New Topic
Reply
