>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> C905 CamDriver Modded
Bookmark topic
On 2009-08-21 19:54:09, eltoffer wrote:
yes i did it but no success did you really get 24 fps?????? i couldnt i can reach 1.5 mbps but at low fps
Yes,but the bitrate still in 886kbps
And for sure have repeated frames...
Where do you increase bitrate?
--
Posted: 2009-08-21 20:00:00
Edit :
Quote
mmm could you please post a vid at 24 fps???? i cant make it record at that fps :S
--
Posted: 2009-08-22 11:01:30
Edit :
Quote
elToffer Camdriver 3.6.1
Both shots are AUTO with FLASH.
3MB
2.8MB
[ This Message was edited by: Bryan84 on 2009-08-22 15:10 ]
--
Posted: 2009-08-22 16:09:14
Edit :
Quote
There is only one minus the driver can not play the recorded file on your phone.
--
Posted: 2009-08-22 16:14:46
Edit :
Quote
It's frimware limitation... Isn't the driver.
--
Posted: 2009-08-22 18:11:38
Edit :
Quote
I want give us a little explication:
I dont want to "criticize", but yours VGA mods are very poor. You can record video to VGA resolution, yes, but in the best case you only obtain 7-12fps, depending scene complexity. You can force to 15fps if you want, and 24 or 30, only need change a pair of numbers, but this change dont mean you obtain this framerate.
For example, the video upload by eltoffer with her 3.61 version. You can analyze the video and you can view that the máximun fps are 11 (it dont bit). Anyone dont trust me, i can post some images.
And this its very simple. The clock of this camera its setting to 13MHz (Master Clock its double, but its used for other things). But a 640*480 resolution for 15fps (for example) need a little more power. A simple example:
C905 camera capture video in YUV422/YUV420. YUV422/YUV420 need read 4bytes per output pixel (if i remember)
CLK 13MHZ similar to said that can read 13.000.000 bytes per second.
QVGA= 320*240 -> 320*240*4 = 307200 -> 13*10^6 / 307200 = 42.3fps max
VGA = 640*480 -> 640*480*4 = bla bla bla = 10.57fps max
Of course this its relative, you can obtain in some times a little more/less.
If you want a pure VGA at 15fps you need:
640*480*4*15 = 18432000 Hz = 18.5MHz aprox, 19MHz
this mean you must overclock the stock 13MHz clk to at least 19MHz. This can be done in camera driver. The problems? Its can be... dangerous. Always its possible a little margin in OC, but nobody know never the max threshold. My be 19MHz can be safe, maybe no
VGA at 15fps = 19MHz -> Must be safe and stable
VGA at 20fps = 24.5 -> 25MHz -> Can be safe and stable
VGA at 25fps = 30.7 -> 31MHz -> The most probable its very dangerous for cam integrity
In other point, this its only the first problems. Exist other: bitrate. If you want obtain a good quality you need a good bitrate (depending of course of codec). C905 take videos in MPGE-4 part 2 (Im sure that SP profile only) and h263 for videoconference only. In both cases, at a target bitrate of 768. With MPEG4 part 2 SP, 768 can be sufficient for 320*480 30fps, but for 640*480 at 15fps you obtain clearly much less quality. For 640*480 at 20 you obtain less. If you want obtain a similar quality at 640*480 at 20fps you need at least about >1.5Mbps.
Looking into camdriver maybe its possible make a mod to take video in pure YUV, so you can obtain a max quality for video recording with a "expensive" memory size
cheers.
[ This Message was edited by: Theliel on 2009-08-23 12:45 ]
--
Posted: 2009-08-23 13:42:34
Edit :
Quote
Wow! Been on vacation for some time and what a surprise after coming back home!
Eltoffer did U make any changes with Your camdriver besides 640x480 video?
Cheers DM! nice to see U R doing great job again!
--
Posted: 2009-08-23 20:19:08
Edit :
Quote
In the location of ifs / settings / camera / There are two files camdriver0 and camdriver2 (in the older firmwares, there were three if I remember correctly).
I have a question what's for camdriver2? Has something to do with the video but what exactly?
--
Posted: 2009-08-24 02:33:21
Edit :
Quote
On 2009-08-24 02:33:21, mietek190 wrote:
In the location of ifs / settings / camera / There are two files camdriver0 and camdriver2 (in the older firmwares, there were three if I remember correctly).
I have a question what's for camdriver2? Has something to do with the video but what exactly?
Just like you I was puzzled. So itchy fingers of me, I went to delete camdriver2.dat. Ended up when I boot my phone and try to view videos, my phone kept hanging. So I realized it might be cause I deleted it. So true enough I flash my firmware again and this time not removing camdriver2.dat but just overwriting camdriver0.dat and no hang appear when I tried to view videos.
--
Posted: 2009-08-24 05:35:22
Edit :
Quote
On 2009-08-24 05:35:22, Bryan84 wrote:
On 2009-08-24 02:33:21, mietek190 wrote:
In the location of ifs / settings / camera / There are two files camdriver0 and camdriver2 (in the older firmwares, there were three if I remember correctly).
I have a question what's for camdriver2? Has something to do with the video but what exactly?
Just like you I was puzzled. So itchy fingers of me, I went to delete camdriver2.dat. Ended up when I boot my phone and try to view videos, my phone kept hanging. So I realized it might be cause I deleted it. So true enough I flash my firmware again and this time not removing camdriver2.dat but just overwriting camdriver0.dat and no hang appear when I tried to view videos.
Propably it's for videocalls.
--
Posted: 2009-08-24 17:28:27
Edit :
Quote
New Topic
Reply
