News Forum Phone database

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > Super camera driver for k750/w800/w810 Bookmark topic



yes i know but when its dark it cranks up the iso also and wont stay even set to 100. I want to follow EV computer posted here. Since the phone has a fix aperture, we could only adjust the shutter speed and i want to lock the ISO to 100 or 80 to have the lowest possible noise.
--
Posted: 2009-06-13 10:02:54
Edit : Quote


Hi guys. I have big problem with 6.72 Camdriver. Yesterday I change driver to zuza v3, but I dont like it. Now i have raider from camdrivers.wz.cz and my photos look like that :

When I have good light i have "good" photo :

But in bad light i have that :

Bad light + Night Mode :


How to do better shots with this driver ? Can someone teach me how to set focus, profiles, shutter time etc ?

Raider zrobiłeś super sterownik ale nie potrafie zrobić nim dobrej fotki Doradź coś prosze


--
Posted: 2009-06-14 01:18:14
Edit : Quote



Actually Ultra Super Driver 6.7.u2 Shutter speed behaves differently than the Super Driver of raider. And EV computer is based on that,


Are you using Enhance options? like set +0.7 then zoom at 1.1
--
Posted: 2009-06-14 16:10:37
Edit : Quote


No, I just open the camera and do the pic I dont' understand how to use functions in Raider 6.72
Cam someone teach me please ?
--
Posted: 2009-06-14 19:14:42
Edit : Quote


i think you should read in doc folder

shortcuts:
EM = enchanced mode
ENM = enchanced night mode
CC = color correction

functions list:

-2.0 = Contrast
1.0 = default
1.1 - 1.9 = minimum - maximum

-1.7 = CC Cyan
1.0 = automatic
1.1 - 4.0 = none - maximum

-1.3 = CC Red
1.0 = automatic
1.1 - 4.0 = none - maximum

-1.0 = Saturation
1.0 = initial
1.1 = default (neutral)
1.2 - 4.0 = desaturated - maximum

-0.7 = CC Yellow
1.0 = automatic
1.1 - 4.0 = none - maximum

-0.3 = CC Blue
1.0 = automatic
1.1 - 4.0 = none - maximum

0.0 = Focus
1.0 = automatic
1.1 = infinity
1.2 - 4.0 = manual (press and free snapshot key to enable/disable zoom 4x)

+0.3 = Exposure Compensation
1.0 = 0.0
1.1 = -3.0
2.0 = 0.0
2.6 = +2.0

+0.7 = Shutter Speed
1.0 = automatic
1.1 = normal mode (EM)
= night mode (ENM)
1.2 - 4.0 = normal mode (1/6400s - 1/8s)
1.2 - 3.0 = night mode (1/40s - 2s, values above 3.0 are unknown)
(press and free snapshot key to enable/disable preview)

+1.0 = Light Metering Method
1.1 = spot
other = default (center-weighted average)

+1.3 = Zoom
1.0 - 4.0 = 1x - 4x

+2.0 = Profile
1.0 = automatic
1.1 = cloudy landscape
1.2 = document
--
Posted: 2009-06-14 23:21:05
Edit : Quote


Yea I read it but I still don't know how to set up this punctions . I need a tutorial like this :
Daylight photo of the river - focus 1.1 , exposure 2.0 , profile 1.1 -- Some like this

EDIT : Now I using lpachuong 8.4 and in my opinion this driver takes better pictures than Raiderski. This driver have a lot of manual settings like raider, but takes better shots on auto mode

Some Pics :




--
Posted: 2009-06-15 10:36:49
Edit : Quote


you should start from basic things:

1. subject is far or near? if far then don't use autofocus, use focus infinity like for landscape scenes
2. enable EM/ENM if amount of light is low or very low. enabled mode will prevent high ISO and picture will be much cleaner

every other settings are a secondary matter, sometimes useful, sometimes not
--
Posted: 2009-06-15 11:16:14
Edit : Quote


EDIT : I will back to the Raideer 6.72 , but i need instructions Can u reply in Polish ohere or i PM ?

Będe wdzięczny

--
Posted: 2009-06-15 11:49:29
Edit : Quote


Nice pics Perzon (:
--
Posted: 2009-06-15 19:50:56
Edit : Quote


Some new pics from raider : it's better , but still no ideal - How to set up this driver for good photo
Using Macro + Manual focus (2.6) + Saturation

Using Normal Mode + Profile 1.1 (Clouds)


EDIT : Can someone show me photos from Kriomagf 21.91 modded by Raiderski ?

--
Posted: 2009-06-15 21:43:40
Edit : Quote

---

New Topic   Reply

Forum Index