Sony Ericsson / Sony : General : Any trick to pull out the charger from k750/w800?
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
General
> Any trick to pull out the charger from k750/w800?
Bookmark topic
It seems hard to remove the charger from the phone, I have to use uncomfortable force to have it unplugged, feeling lke the plug may get damaged one day!
You know, in the older models like t610/616, you can easily unplug the charger by tilting the plug upward. Any trick for w800?
--
Posted: 2006-09-23 20:18:36
Edit :
Quote
Residentevil Posts: > 500
Have you checked what the manual says about it?
--
Posted: 2006-09-23 20:44:19
Edit :
Quote
Its like in older models, just push to the back or front.
--
Posted: 2006-09-23 20:51:34
Edit :
Quote
Quote:
On 2006-09-23 20:44:19, Residentevil wrote:
Have you checked what the manual says about it?
I did, the manual doesn't say anything about how to unplug the charger.
--
Posted: 2006-09-23 21:13:32
Edit :
Quote
While unplug it, bend it (the plug in phone) a little bit downwards and no force is needed at all. You will feel this is the way how to do it!
[ This Message was edited by: Bezzz on 2006-09-24 00:53 ]
--
Posted: 2006-09-23 21:49:54
Edit :
Quote
you turn it like 45 degrees up or down. dont apply to much force.
--
Posted: 2006-09-24 13:48:50
Edit :
Quote
...
You were actually trying to pull it straight out?...
The manual DOES state you have to just tilt the charger up or down to take it out...
--
Posted: 2006-09-24 14:22:12
Edit :
Quote
a friend of mine has a w810i and he used to unplug the charger without tilting it. i had to tell him that he was wrong. damn stupid.
--
Posted: 2006-09-24 16:38:01
Edit :
Quote
omg omg thats how i use to take the plug out, just like you guys. the real way of taking it out is to pull one side of it out (lets say the right pin side) then pull the other side out. if you keep bending it up or down it will break (pin will snap if you do it this way). broken many until friend saw me open it and explained it to me. much easier this way and much more durable. the manuel is bullshit if it says bend it down or up.
[ This Message was edited by: tupac1 on 2006-09-24 16:29 ]
--
Posted: 2006-09-24 17:28:37
Edit :
Quote
Quote:
On 2006-09-24 17:28:37, tupac1 wrote:
omg omg thats how i use to take the plug out, just like you guys. the real way of taking it out is to pull one side of it out (lets say the right pin side) then pull the other side out. if you keep bending it up or down it will break (pin will snap if you do it this way). broken many until friend saw me open it and explained it to me. much easier this way and much more durable. the manuel is bullshit if it says bend it down or up.
I'm curious why you think should pull one side out first. I doubt that's the right way.
I agree with the others that tilting upward or downward is the way to go. why? if you look at the shape of the two leads, you know it's easy to bend them up/down, rather than left/right.
--
Posted: 2006-09-24 22:39:30
Edit :
Quote
New Topic
Reply
