>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Symbian phones
> P990i and Wlan
Bookmark topic
I''m sorry for my english but i''m italian...
I have tried to create account a WLAN putting these formulations:
Account Name : XXX
Lan name : I carry out search and I select the hotspot to which I want to be connected
Authentication:Ad hoc (with Infrastruture i see Connections is impossibile)
Channel ad hoc : 11 (i have tried all channel)
Cryptography : None
With this configuration me one connects to all the hotspot without padlock but if i open the browser and i put an address expamle :
http://www.yahoo.com it tell me: “Could not locate remote server
http://www.yahoo.com"
If I go on connection icon and i click it, i see :
State: Active
Envoy: 1,7 Kb
Receipts: 1,6 Kb
this with all hotspot I am connected…
I have tried also to put this date :
IP : 192.168.1.159
Gateway : 192.168.1.1
Net Mask : 255.255.255.0
And i have tried to disable energy efficiency but i don''t go to internet
Please help me !!!
Thx
--
Posted: 2007-02-14 11:21:58
Edit :
Quote
ad hoc? why use ad hoc? when you want to connect using wlan?
and are you trying to connect to locked networks?
_________________
μην ψαχνεις να αγαπησεις κατι τελειο.... αγαπησε κατι που δεν ειναι τελειο και καντο τελειο με την αγαπη σου.....
[ This Message was edited by: mathios on 2007-02-14 11:09 ]
--
Posted: 2007-02-14 12:08:33
Edit :
Quote
>> ad hoc? why use ad hoc? Ad hoc because with Infrastructure it always tell me: “impossible to connect", with Ad hoc it tell me : "Connected" and it exchange always the same
Send byte: 1,7 Kb
Received byte : 1,6 Kb
but into the browser it tell me : Could not locate remote server
http://www.xxxxxx
>>when you want to connect using wlan? Yes, I use WLAN but i have also tried to open browser setting up the account with priority 1 in the group
>> and are you trying to connect to locked networks? No, this networks are free no locked
Please help me....my p990i is broken
--
Posted: 2007-02-14 17:20:03
Edit :
Quote
what firmware does you phone have? if you are using an old fimware try upgrading your firmware to the latest R9EC001 backup your contacts first then flash your phone maby this is your problem for more information look here in italian
http://www.sonyericsson.com/s[....]1&pid=10336&fid=21839&esi=true
--
Posted: 2007-02-15 12:42:53
Edit :
Quote
Ad-hoc is most probably not the right thing here... Ad-hoc is connections between phone and phone, computer to phone etc. That is, without an access point/hotspot, and every device in such a net talks directly to all the other ones.
When you connect to hotspots, you shouldn't need to create an account, just scan, select the network and press the two green arrows. If there is a lock in the right side of the screen on the line of the selected network, it needs some kind of crypto-key. That might be the reason why you can't connect through infrastructure.
In any case, connecting with ad-hoc to a hotspot will (in almost ALL cases) NOT work.
--
Posted: 2007-02-15 13:37:15
Edit :
Quote
@mathios:
My firmware is R9AXXX the last one in italian...
@firetech:
also I have tried to not create an account, just scan, select the network and press the two green arrows but it always always always tell me : "Connections is impossibile!!!"
--
Posted: 2007-02-15 14:35:34
Edit :
Quote
Could you send all 4 System Information codes in full? Or a screenshot, if possible.
And is the padlock at the top right open or closed?
_________________
better to
have it and not need it than to need it and not have it.
[ This Message was edited by: koolezt on 2007-02-15 15:07 ]
--
Posted: 2007-02-15 15:56:38
Edit :
Quote
Where i find system information ? Is this ?
Phone : CXC162037 - R9EA001
Bluetooth : CXC162058 - R5A01
Organizer : CXC162036 - R4A13
CDA : CDA162008/65 - R5A01
I try to connect with hotspot without padlock on the right but if i don't put Ad hoc instead that Infrastructure and i only click on the connect (->
[ This Message was edited by: mimmog on 2007-02-15 15:36 ]
--
Posted: 2007-02-15 16:33:21
Edit :
Quote
Yes, that is the correct information. The latest is Organizer R4B03, so Italy is quite recent. Organizer is the important code.
Please be aware that P990 wi-fi is the slower 11 Mbps 802.11b only. Some access points only work with the faster 54 Mbps 802.11g. The P990 can see those but not connect. Also try moving closer to the access point.
To connect to an open hotspot (no padlock), you don't need to make an account. Just Scan and connect with the arrows. The phone will use a Default account. You should see the message Connected (in English or Italian).
To test the phone, it's best to use a home or office network where you can find out the settings and maybe change them. Use Infrastructure mode and get settings from the person running the network. The phone and the access point must use the same settings.
Make sure the access point is accepting 11 Mbps 802.11
b, Good luck.
--
Posted: 2007-02-15 17:28:46
Edit :
Quote
@mimmog
Well, I don't really see why you can connect with ad-hoc, but that clearly is the reason why you're not getting internet access after connecting...
--
Posted: 2007-02-15 17:46:13
Edit :
Quote
New Topic
Reply
