>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
General
> K750i urgent need of help
Bookmark topic
ok so i have a K750i moded to W800 latest firmware the phone worked fine until today nou the call buton doesnt work ant the 1-2-3 keys dont work either please tell me what to do!!
thank you
--
Posted: 2007-02-27 10:53:59
Edit :
Quote
I suspect it could be a hardware problem.
Try turning on tones or going into the service menu (>*
Good Luck!
--
Posted: 2007-02-27 12:05:21
Edit :
Quote
il try what you said right now, but i cant stop wondering a hardware problem out of the blue? i didnt drop the fone or stuff like that so....
i turned on the tones for the keypad and it seems that nothing happens when i press 1 2 3 and the call button
[ This Message was edited by: iondarie on 2007-02-27 11:14 ]
--
Posted: 2007-02-27 12:08:12
Edit :
Quote
Keys stopping working is a fairly common problem on K750i/W800is, could be you need to take the phone apart, and try removing the keypad PCB and re-inserting it. This may have worked loose causing your problems. But see what happens in the service tests first, see if those keys are malfunctioning in that first.
It could also be that you need to replace the keypad PCB, could be it's become faulty. Has the phone been wet at all recently, even only slightly?
--
Posted: 2007-02-27 12:21:13
Edit :
Quote
in the service tests when i pres one of the buttons that arent working the test quits instantly, the phone hasent been wet or dropped...
[ This Message was edited by: iondarie on 2007-02-27 11:24 ]
--
Posted: 2007-02-27 12:24:35
Edit :
Quote
So it throws you out of the keyboard test? could be that those keys aren't responding, the keyboard service test will exit automatically after a couple of seconds if it doesn't detect any keys being pressed.
If you feel confident about taking your phone apart, try taking it apart then removing the keypad PCB and plugging it back in, cleaning any dirt, dust or debris that you can see. Also look for any signs of corrosion, just in case.
--
Posted: 2007-02-27 12:49:16
Edit :
Quote
Be careful not to bend the ribbon cable, as that screwed my old k700i keyboard up
It's probably a lose connection then.
--
Posted: 2007-02-27 14:28:19
Edit :
Quote
ok guis i finally got home carefuly took the phone apart but nothing seems to be wrong with it it is verry clean...
could it be the soft? right now i'm reflashing it hope this works if not i dont know what else i can do...
--
Posted: 2007-02-27 17:48:09
Edit :
Quote
New Topic
Reply
