>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Tips and tricks
> w810i - scratch on camera
Bookmark topic
Can anyone tell me if i can replace my w810i's back panel with on having a camera cover.
--
Posted: 2007-03-14 19:26:20
Edit :
Quote
Yes, you can... My friend has it... But the cover wears down quickly...
--
Posted: 2007-04-12 15:53:00
Edit :
Quote
the back cover does not have a "lense" in it. It is mounted to the camera and SE says it should not scratch??? I put a k750 back plate on mine!!!
--
Posted: 2007-04-19 08:08:02
Edit :
Quote
should not scratch? That'd mean it's glass. If it is (which I doubt) then you must have really hammered it to get it scratched.
--
Posted: 2007-04-19 10:15:22
Edit :
Quote
The W810i's lens is surprisingly easy to scratch - the problem is not the glass lens, but the bluey-coloured multicoating on it's surface. This scratches and comes off very easily, no matter how careful I was with my W810i it still developed scratches and wear on this coating, so I can see why the OP wants a lens cover.
IMHO this is the one real design flaw with this phone
--
Posted: 2007-04-19 10:18:06
Edit :
Quote
oh I agree with him wanting a lens cover I just didn't think that the W810 had a glass lens (the see through bit that covers the ACTUAL lens, which is most definitely plastic). Infact I'm pretty sure it's just plastic like that of the K750.
You are right the coating is scratched very easily. On K750 too if you are not careful.
You can use a K750 back panel to protect your W810 lens. It won't be an active lens cover as with the K750, but it will protect the lens just fine.
My K750 mainboard and components sit in a W810 chasis (middle part of the casing), with a K750 front and back panel, so it's very doable to put a K750 back panel on a W810.
--
Posted: 2007-04-19 10:30:10
Edit :
Quote
i
my clara.
if im not mistaken i've seen a guy who placed a lens cover in his
810. shall give a look...
--
Posted: 2007-04-19 13:59:22
Edit :
Quote
Yes, it surely possible...
--
Posted: 2007-04-20 10:37:00
Edit :
Quote
You guys mean something like this:
--
Posted: 2007-04-20 23:20:14
Edit :
Quote
Replacing the back and the middle panel is possible between k750 and w810. You cannot change only the front one. Actually by putting k750 back panel of the housing on the w810 you will get perfect camera lens protection, but the camera won't activate automatically by opening the cover, as it does on the k750/w800. That's because the w810 hasn't got the camera switch to activate the camera which is located on the phone mainboard, so you will have to activate the camera using the old way: from the main menu, or holding the shutter button pressed down for 2 seconds.
--
Posted: 2007-04-21 01:00:29
Edit :
Quote
New Topic
Reply
