Esato Forums - Sony Ericsson / Sony : New to Esato? Please read this forum first : Using SEMCTOOL 3.3v to unlock SE D750i

Index Menu

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > New to Esato? Please read this forum first > Using SEMCTOOL 3.3v to unlock SE D750i Bookmark topic

Goosh Posts: 6

Hi there, I've bought a cable to connect my D750i to the computer, I also have SEMCTOOL (software but it doesn't seem to work.

The cable consists of two parts: One part with a USB connector at one end and a female RJ45 connector at the other. The second part has a male RJ45 connector at one end and a connection that plugs straight into the phone at the other.

I think the cable is working fine because when I start the SEMCTOOL program it powers on the phone by itself, even though confusingly it asks for the phone to he powered on by the user.

Everytime SEMCTOOL is run it powers on the phone so the phone displays 'Insert Sim' or 'Charging' and then SEMCTOOL gives the error message 'Phone not powered up'. A couple of times it has given the error message 'Error 305015' but there was no explanation with this.

I am using the right port for the USB cable and the correct baud rate 112500. I am choosing the correct phone in SEMCTOOL and also just checking the box 'Clear SP lock'

I've included a couple of pictures of it.

Does anyone know how to use this program?

Thanks for any advice
--
Posted: 2007-08-16 18:58:59
Edit : Quote

Goosh Posts: 6

--
Posted: 2007-08-16 19:07:54
Edit : Quote

alexlt Posts: > 500

I think you should mark "Read All Codes" instead of "Clear SP Locks" ...
--
Posted: 2007-08-16 19:48:56
Edit : Quote

Goosh Posts: 6

I tried 'Read all codes' but still getting the same response
--
Posted: 2007-08-16 20:26:36
Edit : Quote

Aware Posts: > 500

When you plug the cable in, try holding the phones 'c' button down(don't release it, unless told to)....

Any better??

--
Posted: 2007-08-16 20:48:33
Edit : Quote

Goosh Posts: 6

Hi thanks for replying, I tried holding the C button whilst I ran SEMCTOOL but the phone still powered on after about 10 seconds. Then I tried it while holding the C button and releasing it when SEMCTOOL said 'Power on phone now' but the same thing happened, the phone powered up but SEMCTOOL did nothing and just kept reporting the error 'Phone not powered on'.

--
Posted: 2007-08-16 23:57:17
Edit : Quote

New Topic Reply