>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Error with SEFSTool4
Bookmark topic
Hi, all . I'm going to be modding my phone with the move_sysfiles_to_mem patch which moves the files like this:
/ifs/settings/acoustic -> /usb/other/sys/audio
/ifs/settings/camera -> /usb/other/sys/cam
/tpa/system/layout -> /usb/other/sys/xml
/tpa/preset/custom -> /usb/other/sys/xml
/tpa/preset/system/desktop/flash -> /usb/other/sys/menu/flash
/tpa/preset/system/menu -> /usb/other/sys/menu
/tpa/preset/system/settings -> /usb/other/sys/splash
Now first im supposed to create the folders in /usb and put the files in them - so i made a .raw file of my FS (S_ASIA_LEVAN_GENERIC) using main2fs, and then when i tried to extract that raw using SEFSTool4, i got this log (which has an error at the end):
Main2Raw Log (No errors here)
----------------------------------------
E:W810iModdingMain2Raw>main2raw FS.fbn
(#)main2raw v2.1 by Darkmen 25.10.2006
(#)Converts ssw image to raw image for SonyEricsson phones
(#)db2000, db2010, db2020 ssw format detection
Loading FS.fbn header as 2010...OK!
SSW uses dinamic hash len: 165
Skiping hash section...00A5OK!
Loading entry file FS.fbn to memory...OK! $00A42BBB bytes has been read
Allocating memory for raw image: $02000000 (32Mb)
First flash block offset: $45900000
Start flashing..................................................................
................................................................................
...................OK!
$00A5 blok(s) flashed successfull
Last flash block offset: $46340000, length: $00000200
Writing raw image file FS.raw ...OK! $00A40200 bytes has been writen
Task finished! Press ENTER to quit...
SEFSTool4 Log (Error at the end)
------------------------------------------
E:W810iModdingSEFStool4>sefstool4.exe FS.raw
(#)sefstool v4.7 by Darkmen 28 Oct 2006
(#)Parsing tool for SonyEricsson phones raw File System image
(#)Supported phones: z530, k610, k790/800, w550, w810, w850, w900
Loading FS.raw header...OK!
Detected FS image version: 26
Number of fs_segmments: 0001
seg00: $45900000-$47DFFFFF (37Mb) erase: $00040000 fs_block: $0800 type: $0001
Using fs_block size: $0800
Loading entry file FS.raw to memory...
Alloc read buffer...
Loading seg00[$02500000]...$00A40200 bytes
OK! Read 00A40200 bytes
RAW image contain: $00001480 fs_block(s)
Building maps array...
MAP id: $00000000 found at $000C0800
MAP id: $00000001 found at $00180800
MAP id: $00000002 found at $00240800
MAP id: $00000003 found at $00300800
MAP id: $00000004 found at $003C0800
MAP id: $00000005 found at $00480800
MAP id: $00000006 found at $00540800
MAP id: $00000007 found at $00600800
MAP id: $00000008 found at $006C0800
MAP id: $00000009 found at $00780800
MAP id: $0000000A found at $00840800
MAP id: $0000000B found at $00900800
MAP id: $0000000C found at $009C0800
MAP id: $0000000D found at $00A08800
Found MAPs: 13
Building fs_block array...
MapSIZE: $00000180
Maximum fs_block number is: $00003FCB. Alloc buffer...
Building normal FS image from RAW...
seg00 covered by 00000032 map(s)
Writing normal FS image to file: FS.raw.fs...
Trying to process Mount Table @ fs_block: $0002
@ $00001000: partition #01_FS.raw
type: 04 - FAT16 up to 32Mb fs_info: $00001600 root: $00000040 1st_sec: $0060
files saved: 349
@ $01CD5000: partition #02_FS.rawtpasystembg_imagescache
type: 01 - FAT12 fs_info: $01CD5600 root: $00000008 1st_sec: $0028
files saved: 0
@ $01DE8000: partition #03_FS.rawifs
type: 01 - FAT12 fs_info: $01DE8600 root: $00000008 1st_sec: $0028
files saved: 95
@ $01EE2000: partition #04_FS.rawsystem
type: 01 - FAT12 fs_info: $01EE2600 root: $00000008 1st_sec: $0028
files saved: 2
@ $01F62000: partition #05_FS.rawsmsdata
type: 01 - FAT12 fs_info: $01F62600 root: $00000008 1st_sec: $0028
files saved: 0
@ $01FDA000: partition #06_FS.rawusb
type: 04 - FAT16 up to 32Mb fs_info: $01FDA600 root: $0000003C 1st_sec: $005C
files saved: 0
WARNING: partition start is invalid ($0000 or $FFFF)
OK!
Task finished! Press ENTER to quit.
--------------------------------------------------------------------------
The size of the original .fbn file is 10.2 MB (10,760,160 bytes), but the extracted folder size is smaller! - 8.5 MB (9,175,299 bytes). I think that probably means it did not extract fully..
Sizes: My file was named FS.fbn
(W810_R4ED001_FS_S_ASIA_LEVAN_RED49)FS.fbn - 10.2 MB (10,760,160 bytes)
FS.raw FILE (Generated by main2raw) - 10.2 MB (10,748,416 bytes)
FS.raw.fs FILE (Generated by SEFSTool4) - 31.8 MB (33,445,888 bytes)
_FS.raw FOLDER (Generated by SEFSTool4) - 8.75 MB (9,175,299 bytes)
So i want to know what went wrong in SEFSTool4... Ive tried re downloading SEFSTool4, Main2RAw, and my FS file and trying the whole procedure several times - i get the same result
..
[ This Message was edited by: Overkill on 2007-08-27 08:09 ]
--
Posted: 2007-08-27 09:05:42
Edit :
Quote
Anyone?I've searched for the answer to this so much and posted on so many forums - why does no one know?
--
Posted: 2007-08-27 18:37:26
Edit :
Quote
Have you tried using another firmware?
--
Posted: 2007-08-27 18:44:00
Edit :
Quote
I re-downloaded my firmware and tried it- same result..
Can someone please just extract the
W810_R4ED001_FS_S_ASIA_LEVAN_RED49
FS using Main2Raw and SEFSTool4 , rar up the folder containing the files and email it to me?? I really see no other way than to fix this issue - cant find anything at all on the net about this .
Anyone, please just extract the firmware , rar up the folder you get and email it to me at 4forums1(--AT--)gmail.com ? It will only take you a few minutes, and this is getting really frustrating
--
Posted: 2007-08-27 20:42:08
Edit :
Quote
Someone please?
Just extract the directory of the contents of the W810_R4ED001_FS_S_ASIA_LEVAN_RED49 FS file , rar it and email it to 4forums1(_A_T_)gmail.com
Ive tried everything, it isnt working with me
EDIT:Just tried again now with redl-ed FS file, same result, same file sizes.
[ This Message was edited by: Overkill on 2007-08-28 17:41 ]
--
Posted: 2007-08-28 17:33:17
Edit :
Quote
New Topic
Reply
