Esato Forums - Sony Ericsson / Sony : Symbian phones : P990i Seus - Update not available

Index Menu

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Symbian phones > P990i Seus - Update not available - The software in your phone is up-to-date Bookmark topic

Page12 >

Sjögren Posts: 20

Ok...as the topic says...i cant update my phones firm.

Phone - CXC162037 R7A001

Bluetooth - CXC162058 R4F01

Organiser - CXC162036 R3B01

CDA - CDA162007/1 R3B01

If thats the latest update to P990 im gonna get mad......
And if its not, how do i solve the problem? I can't use the phone because its so damn slow.....

Thanks in advance for helping replies!

Greetings from Sweden =)
--
Posted: 2007-10-14 23:45:10
Edit : Quote

pnf1973 Posts: 403

You probably have the latest firmware for your CDA. Is your 990 a branded one from a network?

In anycase you need to change to a generic world cda which will then allow you to upate to the latest firmware.

See

http://www.esato.com/board/viewtopic.php?topic=130758

OR

http://www.davinciteam.com

One is free, one isn't - one gets a full company support one don't - its up to you which you decide to do, either way you will probably have to flash your phone several times.

[EDIT : scrap that, I just checked your CDA number and you are on world 1. I'd make sure you have the latest SEUS installed and do a completely clean install of it - uninstall your current, completely remove the folder from program files, then download and install the latest - this might solve the problem]

[ This Message was edited by: pnf1973 on 2007-10-14 22:58 ]
--
Posted: 2007-10-14 23:55:46
Edit : Quote

Sjögren Posts: 20

Its not branded...but it is a prototype though...would that be a problem?

I have the latest SEUS, and im running on vista.....Have re-installed it several times....

[ This Message was edited by: Sjögren on 2007-10-14 23:00 ]
--
Posted: 2007-10-14 23:59:34
Edit : Quote

pnf1973 Posts: 403

A prototype? Hmm you need to check this (PeterKay would be good) but i'm pretty sure the proto ones aren't upgradable via SEUS.

You could try davinci then, certainly drop them a line - they might be able to update your phone.
--
Posted: 2007-10-15 00:17:43
Edit : Quote

Sjögren Posts: 20

PeterKay?

--
Posted: 2007-10-15 00:23:06
Edit : Quote

gbrooks3 Posts: > 500

SEUS will reject your phone. I guess your IMEI begind 00460 ?
--
Posted: 2007-10-15 00:35:29
Edit : Quote

Sjögren Posts: 20

On 2007-10-15 00:35:29, gbrooks3 wrote:
SEUS will reject your phone. I guess your IMEI begind 00460 ?

Yes, thats right.....what am i supposed to do?
--
Posted: 2007-10-15 00:38:01
Edit : Quote

pnf1973 Posts: 403

Unless gbrooks3 can get his XS++ app to flash it I'd try davinci, both have their own software for updating the p1. At the moment SEUS is checking your IMEI before the software update, and because you have a proto phone SEUS is then preventing any firmware upgrade.

There is good reason for this, it has been known for prototype phones to have different hardware to the production units, although i don't think SE have done that recently.
--
Posted: 2007-10-15 10:49:43
Edit : Quote

Sjögren Posts: 20

I've tried DavinciTeam, but the classify the phone as a BROWN phone.....and thats not supported..and will not be in the future....Well...i guess i can use it as a brick?
--
Posted: 2007-10-15 13:10:47
Edit : Quote

pnf1973 Posts: 403

How on earth did you get hold of an old prototype anyway?
--
Posted: 2007-10-15 13:23:57
Edit : Quote

Page12 >

New Topic Reply