>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
General
> My SE k750 convterted to w800 wont turn on!
Bookmark topic
hi there, first post sorry if it's in the wrong place!
i was flashing a friends k750 and all went jiggy, i went back to my one i converted a while ago to convert again with a better flash but i think i flashed it with a cid49 when my phone was cid36... i got an error and i tried again but no luck, when i tried turning on my phone i had no luck, completely dead, no red light in the infer red section, no charging, no nothing.
i read that SEUS 1 has recovery mode but i have no clue where ti download that from, google search returned no results..
I know this is an old phone, but i still use it every now and then and i hate that fact it's bricked!
If there's anyway to bring it back to life please advice me!
I only have the USB cable.
Thanks in advanced for all those who respond.
--
Posted: 2008-06-30 00:59:59
Edit :
Quote
flash with again with same cid file, first try to read info with xs software.
--
Posted: 2008-06-30 07:59:21
Edit :
Quote
Phone has no power at all, so how an i possible flash it again? it doesn't function with the power up button, or the "hold C" button, or charging.
I know that if there was a red light flashing then i can do it, but there's absolutely no sign of life at the moment, i left the battery and sim card out of the phone overnight in hope it will miraculously turn on but i just tried it and no luck.
--
Posted: 2008-06-30 13:19:34
Edit :
Quote
Can u post up log?? Try KKclient (google it) to recover fone. Click on erom update and press flash, connect cable holding 2 + 5.
--
Posted: 2008-06-30 20:35:21
Edit :
Quote
i only found v1.8 but apparently there's 1.9, anyway I tired that but no luck again...i might open up the phone today and see if any of the battery pins are damaged =s don't know what else to do!
i cant put a log up as nothing is happening to form a log!
EDIT**
No luck again, I opened it up, cleaned it up, made sure all connectors are tightly put into there position then tried to turn on again but no luck.
wtf have i done to my phone, i either removed it while flashing or flashed the wrong CID i have no clue!.. is this fixable with a cruiser or fighter cable?
[ This Message was edited by: teddyshady on 2008-06-30 21:50 ]
--
Posted: 2008-06-30 21:17:13
Edit :
Quote
Are you sure you have a battery that is charged?
Just keep the charger connected for 1 hr and then try.
--
Posted: 2008-07-01 10:33:25
Edit :
Quote
Why the hell you use KK client for W800???
Did you tried flashing your phone with XS++?
http://www.esato.com/board/viewtopic.php?topic=156090
download firmware from
www.4shared.com
--
Posted: 2008-07-01 10:47:14
Edit :
Quote
i have 2 batteries and they are both 100%, i have tried leaving the phone on charge overnight with no sign of life and for the last time, once again
i can NOT flash it with ANYTHING as there is NO power coming out of the phone, it's dead!
No red light blinking, no charging, no nothing!
I tried SEtools, XS++, Gflash and every other program you can name...i have all the correct flashes (main & FS) and i have the Erom and GDFS backup but i can not power up the phone to do anything!
--
Posted: 2008-07-01 12:26:11
Edit :
Quote
Then you need to check if the phone hardware is OK... or rebuilt the SP area and format GDFS with service cable...
--
Posted: 2008-07-01 12:50:38
Edit :
Quote
phone hardware is fine, i opened it up and checked it yesterday... so my only choice is service cable? is that the same cable phone shops use to unlock phones?
--
Posted: 2008-07-01 12:52:52
Edit :
Quote
New Topic
Reply
