Esato Mobile
Sony Ericsson / Sony : Technical : k800i problems
> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Technical > k800i problems Bookmark topic
viv911 Posts: 36

ok. i downloaded a game and my phone froze so i took the battery out,( it was fully charged) i put the battery back in and the phone wont turn on


Can some1 help
--
Posted: 2008-07-15 20:33:57
Edit : Quote

Cold Fusion Posts: > 500

I think u have to flash it. Use the search button
--
Posted: 2008-07-16 19:40:53
Edit : Quote

centur Posts: > 500


On 2008-07-15 20:33:57, viv911 wrote:
ok. i downloaded a game and my phone froze so i took the battery out,( it was fully charged) i put the battery back in and the phone wont turn on


Can some1 help

Must use setool2lite1.11.rar

1. Reinsert battery and do NOT turn on phone!
2. Start Setool and click Identify
3. Hold 2 and 5 together and in the meantime put the USB cable.
When hear that sound (though that connects USB flash memory) disconnect USB cable, reinsert battery and do NOT turn on phone!
4. Start XS++ v3.2 and click Connect.
5. Hold "C" button in the meantime put the USB cable.
6. Flash only Main (K800 _R8 BF003 _MAIN_GENERIC_WI_RED52), then again disconnect USB cable, reinsert battery and now can turn on phone - work fine as before.
--
Posted: 2008-07-16 23:20:27
Edit : Quote

sakförare Posts: 1

Dead K800i
red Blinking problem (5 times)
Problem k800i

I have a sony ericsson K800i.
I had the red blinking problem. (it wil not start after replacing sim)
So i was searching on the internet.
I wanted to doe it for free.
What i red was that most of the time you have this problem you
need to update your EROM.
You kan make an accoun bij many organisations en then it cost you money.

I found a way to do it for free.
Go to
http://www.kulankendi.com/index2.php?pStrona=download
Download: KK_MClient.exe

Then you instal it and open it.
You do'nt need to do something withe the login because you can do this for free.
You choose Erom Update
put your battery of your phone for a little moment.
Put you usb cable in your computer.
Then you click on the flash phone button.
and while you are holding the buttons 2and 5 on your phone you put your usb cable in.
if he does'nt start do this with Read GDFS while holding C instead of 2 and 5.
After you do this you try the EROM again.
In a little moment you erom is updated.

I was stunt that it worked so i wanted to give you guys the information that i know.

My english is sucks but i think that people kan follow it.

sakforare@live.nl is my spam mail so if you want to ask someting you can try.
I dont look very offen to this mail.

Good luck
Joris (holland)

--
Posted: 2008-07-18 18:03:37
Edit : Quote

Elias El-Chi Posts: 1

Hallo, could you help me please solving this problem without paying money?
I removed the battery when I replaced again the phone was not responding and the infrared light is blinking each time you try to switch on the unit.
I am not able to start my mobile is there any reset button I removed the battery for the whole day and tried after that without any improvement always the same symptoms.
Thank you in advance for your support.
Regards
--
Posted: 2008-07-19 09:01:13
Edit : Quote

centur Posts: > 500


On 2008-07-19 09:01:13, Elias El-Chi wrote:
Hallo, could you help me please solving this problem without paying money?
I removed the battery when I replaced again the phone was not responding and the infrared light is blinking each time you try to switch on the unit.
I am not able to start my mobile is there any reset button I removed the battery for the whole day and tried after that without any improvement always the same symptoms.
Thank you in advance for your support.
Regards



On 2008-07-16 23:20:27, centur wrote:

Must use setool2lite1.11.rar

1. Reinsert battery and do NOT turn on phone!
2. Start Setool and click Identify
3. Hold 2 and 5 together and in the meantime put the USB cable.
When hear that sound (though that connects USB flash memory) disconnect USB cable, reinsert battery and do NOT turn on phone!
4. Start XS++ v3.2 and click Connect.
5. Hold "C" button in the meantime put the USB cable.
6. Flash only Main (K800 _R8 BF003 _MAIN_GENERIC_WI_RED52), then again disconnect USB cable, reinsert battery and now can turn on phone - work fine as before.


--
Posted: 2008-07-19 14:41:49
Edit : Quote

New Topic   Reply
Forum Index

Esato home