>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> White Screen
Bookmark topic
I tried to Connect my w610i to PC (i have done this before and no problems)
Today pc didn't found w610i there was not even than sound when u connect something to PC via USB.
Ok tried to connect via other USB port there was at least that sound when u connect something. But still didn't found it, it some kinda restarted (Phone) and did not do anything useful, so i disconnected the whire and tried my Screen turned White now i can't get rid of it. I took out my Battery anyway after turning on only white screen appears and i cant do anything
Does anyone have any Idea what can i do ?
--
Posted: 2008-09-03 09:44:21
Edit :
Quote
Hi
You will have to flash your phone.
Search for XS++ tutorial.
--
Posted: 2008-09-03 09:45:23
Edit :
Quote
If your phone is CID52 use this tutorial:
http://www.esato.com/board/viewtopic.php?topic=156090
if you get "phone not supported" error with that tut, use this one:
http://www.esato.com/board/viewtopic.php?topic=170737
and instead of the K810 files provided, do the same with firmware for your phone model... Download firmware files from
www.4shared.com 
--
Posted: 2008-09-03 10:35:37
Edit :
Quote
now it shows that i have some Configuration Error and i should connect operator or service center.
I did Back Up GDFS and restored it..
--
Posted: 2008-09-03 10:41:10
Edit :
Quote
Yeah you done it preperly. It is not GDFS. Now connect phone to XS++ and check "customize filesystem" box (only that one), select phone model, select cda and region and hit flash... it will be repaired. You need to finalize the phone now.
You are on good way
--
Posted: 2008-09-03 10:53:26
Edit :
Quote
On 2008-07-18 16:31:31, unforgiven_sh wrote:
Customizing/Finalizing With XS++
Step 1. - Take battery out of phone and put back in (do not turn phone on). Open XS++ and click Connect. Hold down the "C" button on the phones keypad and connect the USB cable.
Step 2. - Tick “Customize File System”, select model and region/CDA, click flash. If you cannot find a custpack in XS++ that meets your needs you may upload your own. Select "own custpack" from the CDA menu. The make a folder in the same directory as XS++.exe called "own_custpack". Inside, extract the pack you want to use, keeping the tpa/preset/custom folder tree.
Step 3. - Done. Disconnect and turn ON your handset.
- If XS++ does not contiain the cust pack your require. You may download one, select "own_custpack" from the CDA box, create the folder "own_custpack" in the same directory as XS++ and then extract the custpack to it, keeping the tpa/preset/custom tree.
--
Posted: 2008-09-03 11:20:36
Edit :
Quote
@tranced, great tip man. I should post this one in my flashing thread.
--
Posted: 2008-09-03 11:23:38
Edit :
Quote
Thanks Guys.
This is the most friendly forum where I have ever been.
I did everything successfully except that I lost all Pictures from DCIM ;(
Anyway thanks for helping!
You are the best!
--
Posted: 2008-09-03 12:33:57
Edit :
Quote
cheers mate
yes, you had to back up everything before flashing. flashing is like formating c drive
--
Posted: 2008-09-03 12:38:44
Edit :
Quote
Hehe glad to know your phone is flashed successfuly now.
--
Posted: 2008-09-03 12:53:21
Edit :
Quote
New Topic
Reply
