News Forum Phone database

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Symbian phones > P800+XP home edition-how to install drivers of modems? Bookmark topic

Hi mates.Just bought a IBM R31 with WinXP and allthough I installed the P800 PC Suite several times it doesnt complete with the Dial up networking wizard.Do I have to install drivers of the modems found on the cd rom and how,also how can I verify the port allocated is enabled?All these questions seem huge now but cetainly someone out here could help out with a good answer,l really would appreciate this highly.One more thing,lets all wish for a quick ending of the Iraq war and no further implications following.Awaiting for a reply,I remain a freeloader .
--
Posted: 2003-03-21 22:28:00
Edit : Quote


To install the modem driver you need to do the following.

Open "control panel" > select "phone and modem options" > click on the modem "TAB"

Click on add > check "don't select my modem" and then Next

Select Ericsson from Manufacturer insert your P800 disc and then select Have Disc>select your drive and then click ok

You can now select the drivers you need
--
Posted: 2003-03-21 23:57:00
Edit : Quote


Have same problem...do as above but only comes up with modem connections for IR,Bluetooth,or serial,no modem connection for usb cable. But if you look in the modem section of the cd there is a modem file for usb cable connection. p800usb.mdm. But it doesnt transfer. ???????????
Help!!!!!!
--
Posted: 2003-03-22 08:54:00
Edit : Quote


You should have "Ericsson Serial modem" install that one
--
Posted: 2003-03-22 09:20:00
Edit : Quote


well,dear bogman,I did follow your instructions but serial is not usb etc. so I tried infra ,worked until a certain point to set up the DUN wizard.Now I dont know how to change the com ports,because when usb connected it shows com 5 conected but the modem either ir or serial is on com 1 ,how do I change that.Bogman many thanks for your precious help,if you can please kindly reply. This message was posted from a P800
--
Posted: 2003-03-22 10:53:00
Edit : Quote


In "Phone Connections Link" (broken double sided arrow in task bar) make sure you have the "USB COM PORT 4 NOT CHECKED"

You need to install the "Serial Modem" like I said in previous post from your p800 DISC, install the modem on COM PORT 4

In "Phone Monitor" make sure you have COM PORT 4 ENABLED

Run the "Dail Up Networking Wizard" and follow the instructions selecting "Serial Modem on COM PORT 4

I'm posting this using the P800 modem

Let me know if you need any additional help

Don't forget when you want to sync your phone tick the USB COM PORT 4 and change you settings on the p800 back to PC


_________________
The Bogman
P800
TDK BUD
HBH-60

[ This Message was edited by: Bogman on 2003-03-22 20:00 ]
--
Posted: 2003-03-22 20:58:00
Edit : Quote


Dear Bogman,I followed again your very good directions and everything happened as you said BUT it didnt get finally connected.Even when I enabled COM 4 on phone monitor,the phone links properties showed COM 4 not connected.Strangly in pc mode(p800)it connected,so when I switched back to modem mode it disconnected.For some reason the P800 modem is not connecting,on Device manager after query modem function it said if the hardware is in the HCL list and compatible with Windows.Im really confused and sorry to be annoying for you with all my questions but Im surely missing something,I even tried the whole thing yesterday with Irda and I completed the whole DUN wizard,but it didnt connect,hardware problem it said.So finally if you could suggest some solution please do so,if you want you can also email me to rostropol@yourwap.com.Once more thank you for all your assistance.P800 is now the big player in the field,a true winner. This message was posted from a P800
--
Posted: 2003-03-22 23:45:00
Edit : Quote


Dear Bogman,I finally connected this is my first message through web thanks to you.I cannot send you email through yourwap.com.I owe you now and am obliged.One more thing>the two little screens show 9.6 kbps speed and the wireless link with P800 inframodem show 115200 bps is this ok or can I increase the 9.6 kbps speed,presently it works fast enough and only with this speed.Many thanks again,its amaizing.
--
Posted: 2003-03-23 13:38:00
Edit : Quote


Bogman,finally everything is fine 115 kbps in modem data amount transfer and when I click on infrasign it shows 115200 bps wireless link with P800.Everything is fast and fine,ok.I prefer the IR link,and 115kbps is fast enough,dont you agree? This message was posted from a P800
--
Posted: 2003-03-23 19:20:00
Edit : Quote


If its on gsm dialup you're browsing at 9,600 bps max..

Depending on yer service provider you will get up to 57,600bps on gprs.

The 115,00 is only showing the port speed..


--
Posted: 2003-03-24 01:02:00
Edit : Quote

---

New Topic   Reply

Forum Index