>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
General
> xtnd, sync and contacts
Bookmark topic
After a lot of searching its taken 2hrs but ive got XTND playing nicely with my T610. The only problem i am now having is when i when i force full sync from Outlook>2>T610 the email addresses dont get transfered? anyone know why at all?
By they way from doing some searches i see that there is alot of questions about setting this up. I got my instructions from;
http://www.expansys.de/forumthread.asp?code=T610&thread=352 but incase the link dies here are the instructions (copied over)
Setting up the handset
1. From the Menu select Connect and press Yes
2. Select Bluetooth, press Yes
3. Select Discoverable, press Yes
4. If prompted for a Phone Name, enter one here and press Yes
Discovering the handset
1. On the PC, double click on My Bluetooth Places
2. Double click Entire Bluetooth Neighborhood
3. After a few seconds a list of discovered devices will be displayed,
if you wish to search again, Press F5
Pairing with the Handset
1. On the phone, from the Menu select Connect, press Yes
2. Select Bluetooth, press Yes
3. Select Paired Devices, press Yes
4. Select Add Device, press Yes
5. Select Phone Accepts, press Yes
6. If prompted for a Phone Name, enter one now and press Yes
7. On the PC, double click on the icon for your phone
8. On the phone it will display "Add to Paired Devices", press Yes
9. On Enter a Passkey (this must be numbers e.g 1111), press Yes
10. On the PC, click the Bluetooth icon in the system tray
11. Enter the same Passkey you entered on the handset
12. On the phone, press Yes
13. Press NO 4 times
Setting up as a modem
The TDK software will install a generic Bluetooth modem automatically, sio
further configuraiton is necessary. When setting up your ISP connection,
select the Bluetooth Modem as the connection device.
Setting up synchronisation with Microsoft Outlook via the XTND connect PC
software
1. On the PC, ensure the My Bluetooth Devices is open
2. Double click Entire Bluetooth Neighborhood
3. Double click the icon for your phone
4. Double click Serial Port 1
5. A message will now appear saying "The Bluetooth Serial Port COMx
will be used when connetcing to device T68I" (where x is a number) make
a note of this COM number
6. The icon Serial Port 1 will now be green
7. Click the Start button
8. Click Settings then Control Panel
9. Click Phone Monitor Options
10. Click the Setup tab, click Always display the icon
11. Click COM Ports
12. Click the COM port number we noted down earlier, click Enable at the
bottom
13. Click Apply then OK
14. Click the XTND Connect PC icon in the system tray
15. Click Synchronize Outlook
16. Click Synchronize
If this is the first time connecting your phone to this PC, a Phone
connection Wizard will appear. If you have connected before, proceed to Step
21
17. Click Next
18. Type a name for your Sim Card (e.g My Sim), click Next
19. Type a name for your Phone (e.g. My T68), click Finish
20. The synchronisation process will now have timed out and an error
message "Unable to detect Phone" will be displayed. Click Retry or just
restart the Sync process
21. After a few seconds the software will start to sync with your phone
Please note that Steps 1-6 needs to be done EVERY time the phone goes out of
Bluetooth range (10 meters) or the PC is Rebooted
--
Posted: 2003-12-31 04:05:57
Edit :
Quote
on the t610 try phonebook>options>contact info and check if email address is ticked
--
Posted: 2003-12-31 12:51:23
Edit :
Quote
Thanks for that but they are all ticked. Bascially i already sync'd up so that my Outlook contacts have everything from my phone (including already setup email address's) then while in Outlook and added to the details, now i want to upload those details back to the phone. But as soon as i check my phone afterwards the only thing it holds is the mobile numbers, arrrrgghhhhhhhhh
and happy new yeah ;o)
--
Posted: 2003-12-31 13:39:36
Edit :
Quote
New Topic
Reply
