>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> "Turn on" don't works ?
Bookmark topic
Hi,
I have downloaded firmware and language files and i press flash then they ask me too push turn on so i do that but don't works
i push quickly
what's is the problem ?
thanks
--
Posted: 2004-11-16 14:10:34
Edit :
Quote
I suppose you are trying to unlock/unbrand/upgrade with totalserver?
This is how i have succeeded 5 times in a row
1. Make sure battery is fully charged!!
2. Remove battery and SIM from phone, leave battery out for a couple of minutes.
3. Attach T28 service cable to phone, put battery back and follow on-screen instructions.
If the phone doesn´t react on first press of 'on' button, simply wait and try again, this time press it a wee bit longer, if phone should start normally, remove battery, wait a while, put it back and try again.
--
Posted: 2004-11-16 14:50:01
Edit :
Quote
i push the "on" button - than 1sec but my phone turn on
--
Posted: 2004-11-16 15:29:24
Edit :
Quote
Try inserting battery at the moment it says: "Turn on..." not before. I mentioned somewhere here on this forum so look for details or PM me and I'll answer when I come near PC. Or your cable is not the right one.
This message was posted from a K700i
--
Posted: 2004-11-16 16:02:07
Edit :
Quote
Do you have a service cable or a data cable??
--
Posted: 2004-11-16 20:25:31
Edit :
Quote
i have 2 cables one to unlock and the cable to transfer games, ringtones
i can transfer games,themes but the firt cable i don't know if it's works, if it works correctly. i don't have on the systray the phone monitor icon
Where i can find the latest phone monitor ?
[ This Message was edited by: kinyo07 on 2004-11-16 22:07 ]
[ This Message was edited by: kinyo07 on 2004-11-16 22:09 ]
--
Posted: 2004-11-16 23:03:03
Edit :
Quote
you need to use the service/unlock cable....(The one that doesn't appear to work/wont send games etc)
The service cable wont show your phone is connected in the phone monitor app.
Also id disable phonemonitor as it might screw up the flashing.
You start with the phone turned OFF then just press on when it tells you (The phone shouldnt actually turn on) The software should then continue to put the loader on the phone and will then be ready for flashing.
[ This Message was edited by: iamcrunchie on 2004-11-18 11:23 ]
--
Posted: 2004-11-18 12:23:16
Edit :
Quote
New Topic
Reply
