Sony Ericsson / Sony : GPRS, WAP, MMS and Email setup : V800 and the Bluetooth Modem
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
GPRS, WAP, MMS and Email setup
> V800 and the Bluetooth Modem
Bookmark topic
Maybe someone can help ?
How I do connect my IPAQ 5450 to the Vodafone GPRS service via my V800 phone.
I have set the dial number to "*99***1#" and set up a Data account on the phone which has CID=1.
My init string is "+cgdcont=1,"IP","internet"".
I can get a good connection using an IRDA modem but not via bluetooth.
any ideas ?
--
Posted: 2004-11-18 20:35:13
Edit :
Quote
I have exactly the same problem: I have a V800 and an iPaq 4150. I can connect the 4150 through the V800 to 3G GPRS using IrDA, but not through Bluetooth.
I have used the same iPaq successfully with T610, T68i, T39 with no problems, and have connected a PC to the V800 as well as the other devices.
I suspect that there is a problem with the two bluetooth stacks - it is very annoying. I know full well that each manufacturer is going to blame the other, so wonder how I can get this resolved... Grrrr!
--
Posted: 2004-11-19 18:43:10
Edit :
Quote
Just to say that I have the same problem too, and finally came to the conclusion that there's no way to get this to work with the current firmware. I have 2 Voda SIM cards and 3 SE phones inlcuding the V800. Either SIM works fine in either of the other SE phone when establishing a Bluetooth dialup connection from my IPAQ. The V800 refuses with either of the SIMs. This wouldn't be so frustrating if the whole point of 3G wasn't high speed data!
As a matter of interest, has anyone successfully setup a Bluetooth dialup connection with a PDA other than an iPAQ?
[ This Message was edited by: esoqq on 2004-11-20 12:32 ]
--
Posted: 2004-11-20 13:28:46
Edit :
Quote
hi guys
im also having the same proplem between my s700 and ipaq4150 i tried with p900 and its working .the proplem only with the s700 and ipaq .also i have conected my s700i with palm zire 72 via bluetooth and connection work fine . i already sent email to widdcomm the bluetooth software provider for ipaq and im waiting for thier reply . the bluetooth version my ipaq using it 1.4 build 75 .by the way is there is a way to upgrade the bluetooth version in the ipaq ??
--
Posted: 2004-11-21 07:33:20
Edit :
Quote
Hi from Greece and Vodafone GR ...
i've got the same problem here with V800 and ipaq 4700 ...
I connect fine through bluetooth modem wtih my P910 & Z1010 but i can't connect with V800 ....I've tried everything for 2 days but nothing...
On the other hand i can transfer files beetwen them with bluetooth ....
The bad thing is that neither Vodafone knows anything about it...
I've tried to connect through USB from my desktop and its OK ...
I guess it's firmware's fault ..... Bad fo SE ...too Bad..
I'm VERY VERY dissapointed about this because this is the reason that i bought this phone ...
Hope they'll fix it SOON !!
[ This Message was edited by: TLG on 2004-11-21 16:08 ]
--
Posted: 2004-11-21 17:03:47
Edit :
Quote
With PC's it works fine. So iI think t's not a phone problem!
--
Posted: 2004-11-21 18:48:30
Edit :
Quote
guys, just put a "z" (no quotes) at the start of your iPAQ modem init string and all will be well.
I had no problem doing this with the hx4700 and V800 and its the same issue with iPAQs and the K700
--
Posted: 2004-11-21 18:52:31
Edit :
Quote
Yepp you are right.
I was just looking in my history to find the solution. It's a known problem with these Pocket PC's.
I think most of the customer care centers should be aware of this. ATZ is just "reset" the phone.
--
Posted: 2004-11-21 19:05:51
Edit :
Quote
Just wanted to suggest that z solution - it's the same for K/S7
This message was posted from a K700i
--
Posted: 2004-11-21 19:48:43
Edit :
Quote
messsure .i dont understand what u mean by init string do u mean to put z*99# as a dial up number in ipaq modem??
--
Posted: 2004-11-22 06:23:07
Edit :
Quote
New Topic
Reply
