>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Technical
> t610 to t637
Bookmark topic
hello im going to convert my t610 to a t637 im buying a t637 original housing and all buttons+original t637 lcd from ebay and i have a terminator dongle and t637 firmware witch i kno to flash to the phone after i replace the lcd. my question is, is a new t637 lcd and housing all i need to correctly transform my t610 to t637?
_________________
If you cant get the best out of it, then f**k IT.
[ This Message was edited by: nykon on 2005-02-11 01:38 ]
--
Posted: 2005-02-11 02:37:21
Edit :
Quote
The T610s has a LCD screen while the T630/37 has a TFT. Won't that make a difference?
This message was posted from a T230
--
Posted: 2005-02-11 02:49:11
Edit :
Quote
what does tft mean? isnt the t637 screen alot better than t610? so a tft must be better than lcd?
--
Posted: 2005-02-11 03:53:52
Edit :
Quote
I'm not sure if this works, t610 has a 900/1800/1900 freq, while t637 has a 850/1800/1900 freq. I'm not sure if the hardware supports this. I may be wrong.
This message was posted from a K500
--
Posted: 2005-02-11 03:57:25
Edit :
Quote
The T630 screen is better. Agreed. What i'm asking is, that the T610s is designed to work with a normal LCD display so its hardware must be designed for that. It might not satisfy the requirements of the better TFT screen of the T630.
This message was posted from a T230
--
Posted: 2005-02-11 04:02:34
Edit :
Quote
If you are using a t610 with a T630 firmware, you need to change the screen to make it work. Else will not. No hardware trouble.
This message was posted from a K500
--
Posted: 2005-02-11 04:05:35
Edit :
Quote
thats what im trying to do is run t637 firmware on t610 but i was told that u have to switch out the screen with a t637's screen becuase the firmware is set for a higher res witch the t610 lcd doesnt support. witch means the screen quality should be better on the t637 screen then on the t610. also the t637 firmware has some better feature like the zoom for camera etc.
[ This Message was edited by: nykon on 2005-02-11 03:10 ]
--
Posted: 2005-02-11 04:09:08
Edit :
Quote
Residentevil Posts: > 500
You might be able to use the T630FW to flash your T610 let us know how it works. There was a discussion before about that a couple of month ago.http://www.esato.com/board/viewtopic.php?topic=60620&start=15#post788627
there are others use "T610 to T630"
_________________
Tough times don't last, tough people do!
[ This Message was edited by: Residentevil on 2005-02-11 03:30 ]
[ This Message was edited by: Residentevil on 2005-02-11 03:32 ]
--
Posted: 2005-02-11 04:28:15
Edit :
Quote
i dont think the t630fw will work without the t637 lcd ether as im pretty sure the t630 and t637 use the same screen. since the lcd's on ebay say "t630/37 oem lcd"
--
Posted: 2005-02-11 04:32:04
Edit :
Quote
I'm sure it will work. What i'm not sure of is the bandwidths.
This message was posted from a K500
--
Posted: 2005-02-11 05:22:22
Edit :
Quote
New Topic
Reply
