>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
General
> Changing T68i cover
Bookmark topic
Ý bought a t69 gold cover and i want to change my cover so if i open the front cover , the vibrate motor dont run again? Ý read old post about cover changing and they are talking about vibrate motor on the front cover.How can i change the covers without an sign so service point cannot learn that i opened the phone.Good days!
--
Posted: 2005-02-15 20:18:00
Edit :
Quote
dont think u can unless u paint the screws blue again after replacing the cover.So the screws dry blue.
--
Posted: 2005-02-15 20:20:33
Edit :
Quote
well, its not that hard to change the cover, the vibra is in the upper apart on the front cover. and as ahdam said, take care with the screws!
--
Posted: 2005-02-16 14:42:47
Edit :
Quote
They don't just use any ordinary paint on the screws. It's proprietary, so I don't know where you can get it. Plus, they also put a thread locking liquid before they put in the screws. That's why you could hear a click when the screws are removed for the first time.
--
Posted: 2005-02-16 15:11:35
Edit :
Quote
The vibra motor doent work as it is still in the old cover! have a look at the front cover at the bottom, you have to pop it out and put it in the new one.
Any thread locking glue will work, but you only need a drop on the thread, and it does make a clicking noise when undoing it for the first time. It take 3 hrs to dry properly too. i use the thread lock for remote control cars .(that is designed to stop vibrations rattling the screws loose.)
--
Posted: 2005-02-16 15:26:52
Edit :
Quote
And take care with the aerial cover, it could brake easy! Not a big deal to get it off, even...
This message was posted from a Z1010
--
Posted: 2005-02-16 17:40:36
Edit :
Quote
hmm thanks for responses.i opened my phone and take out the front cover but back cover seems to be screwed!? How can i take out the back cover?
--
Posted: 2005-02-16 17:42:19
Edit :
Quote
If your talking about the aerial, just pop the two clips by where the top of the battery goes
--
Posted: 2005-02-16 23:16:21
Edit :
Quote
The best is to make it in the middle of that apart.
This message was posted from a Z1010
--
Posted: 2005-02-17 00:21:12
Edit :
Quote
New Topic
Reply
