>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Accessories
> Echo problem with HBH-20! Need help
Bookmark topic
Hi,
occasionally, when I am using my HBH-20 headset, the other party hears an echo in their own voice. The problem is not so regular that I can see a particular patten. I don't hear any echos on my end, only the party at other end. I am not sure if it is related to signal strength of the phone. However, when using my handset, there is NEVER any echo problems at the other end. Any feedback is greatly appreciated
--
Posted: 2002-07-28 04:48:00
Edit :
Quote
I have the same problem with my HDH-10.
Could somebody tell us what to do?
--
Posted: 2002-07-28 09:12:00
Edit :
Quote
i had the same problem with my HBH 15 .. i went back to
and the got me a new set..
--
Posted: 2002-07-28 09:15:00
Edit :
Quote
Then, hows ur new set?
--
Posted: 2002-07-28 09:20:00
Edit :
Quote
i have same problem 2
if leave my bluetooh in car in HOT condition, but no problem in COOL condition. mic cannot accept my voice you guys just echo
Motorolla bluetooh headset
--
Posted: 2002-07-28 12:14:00
Edit :
Quote
louisboo
emang lu punya motorola apa ericsson?
--
Posted: 2002-07-28 12:23:00
Edit :
Quote
Mine works fine (HBH-20 with T68m(i) sw.R2E006).
This post was posted from a T68i
--
Posted: 2002-07-28 14:52:00
Edit :
Quote
BLueblooD
gua punya Motorolla
udah 3x headset bluetooth gua ketinggalan di mobil 2x kali ketinggalan waktu siang jadi micnya gak berfungsi alias kalo nelpon speaker gua doank yg aktif sekali lagi waktu malam2 tapi gak pa2.
kalo menurut kesimpulan gua headset bluetooth sensi terhadap panas, tapi kalo udah rada lama suaranya micnya ada tapi kecil. lu punya apa? udah pernah ketinggalan di mobil siang2 minim 3 jam aja!
--
Posted: 2002-07-28 15:12:00
Edit :
Quote
my new set worked fine .. but now it is having some distortion again .. so i am going back to them once more ..]
--
Posted: 2002-07-29 06:15:00
Edit :
Quote
Hello,
This is a known poblem with the HBH 20. If you have a bad connection between the ground lead of the connector that connects the cord to the bluetooth interface. The ground lead is the first connector you see when looking into the hole in the bt interface, I carefully extended this lead by lifting it with a small pin. You may also try to clean the male and female with some electronics cleaner. You should be able to verify the problem by turning the connector while speaking to somebody.
Good luck!
--
Posted: 2002-07-29 10:29:00
Edit :
Quote
New Topic
Reply
