Esato Forums - Sony Ericsson / Sony : Software, Firmware and Drivers : Install original SE firmware K750I

Index Menu

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > Install original SE firmware K750I Bookmark topic

Yannmrt Posts: 18

Some know how to but original firmware from SE wihtout any customization from any provider ???
Even after update with new firmware the customization E-plus stay.

Thanks

[ This Message was edited by: Yannmrt on 2005-06-14 19:20 ]
--
Posted: 2005-06-14 20:17:59
Edit : Quote

Cytech Posts: > 500

The

update service checks the phone's CDA and IMEI number and then update with the right firmware pack... meaning you have to change both IMEI and CDA number in order to be able to unbrand the firmware through the update service... so if you want to unbrand it you'll either have to take the phone to some store that performs theese things or get some third party software in order to update the phone yourself
--
Posted: 2005-06-14 21:05:18
Edit : Quote

synagence Posts: 114

Its just the CDMA number which needs changing NOT the IMEI number....which is technically illegal i think

When i wanted to upgrade my S700 with R3m my CDMA number wouldn't allow it on SEUS...so i changed it with setool to a generic version and upgraded fine

the IMEI number is just a serial number...
--
Posted: 2005-06-15 09:02:03
Edit : Quote

Yannmrt Posts: 18

Quote:
On 2005-06-15 09:02:03, synagence wrote:
so i changed it with setool to a generic version and upgraded fine

the IMEI number is just a serial number...

Do you buy all the setool set, i see some thing like 270 $, or do you find other way ??

[ This Message was edited by: Yannmrt on 2005-06-15 09:23 ]
--
Posted: 2005-06-15 10:21:55
Edit : Quote

synagence Posts: 114

I had a couple of setool credits left over from previous firmware updates so i got some help and was able to get it changed....

Not sure whether you can still do it this way unless you already have credits...
--
Posted: 2005-06-15 11:26:48
Edit : Quote

DCUK7 Posts: > 500

You cannot get individual SETOOL credits any more. Ask gbrooks3 about this, he is/was an authorised reseller of the credits.
--
Posted: 2005-06-15 14:02:30
Edit : Quote

Yannmrt Posts: 18

Any way i check again and to be able to do the "transformation" i need to make other cable and I don't have any thing to do it ;o(((
Thanks every body.

If some one know a shop or somebody where they can take care for everything in Madrid please e-mail me the address.
Thanks

[ This Message was edited by: Yannmrt on 2005-06-15 16:22 ]
--
Posted: 2005-06-15 17:20:02
Edit : Quote

gbrooks3 Posts: > 500

Just to clear things up a little,

As far as i know, the SEUS checks CDA and TAC part of IMEI to determine its current state and what model it is.

To decustomize new phones, you need a new cable

Pinouts are already available - BUT MOST IMPORTANTLY

DO NOT USE POWER FROM USB, YOU WILL FRAZZLE YOUR PHONE, you should not exceed 3v DC input - best thing to use is a regulated power supply. Of mod the PCB with a resitor and zenner diode.
--
Posted: 2005-06-15 17:26:37
Edit : Quote

Yannmrt Posts: 18

Start to be Chiness for me.
If you have link where i can see the cabling ..... may be it will be more easy.
and after I need to get the software and the firmware to be transfer.
--
Posted: 2005-06-16 16:05:44
Edit : Quote

New Topic Reply