Esato Forums - Sony Ericsson / Sony : Software, Firmware and Drivers : Problems with k700 flashing using davinci

Index Menu

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > Software, Firmware and Drivers > Problems with k700 flashing using davinci Bookmark topic

Page12 >

imhotepp Posts: 74

Hi,

bought to credits from davinci and launched their client connected to my k700 through dss-25 (which shows as dss20 under Device Manager, is this normal?)

I used my first credit to unlock the phone which apparently went well, no errors but not tested a different sim card yet.

However when I tried flashing to the newest formware R2Y, I first flashed cda29 to cda36 succesfully and then in the middle of flashing the r2y firmware I was getting block not accepted errors , I kept removing the battery reinserting and switching the phone on again, but now the phone has been dead and I left the battery out for almost 30 minutes and still it wont switch on?

What should i do?
--
Posted: 2005-07-26 21:36:47
Edit : Quote

merolliaz Posts: 7

I had the same problem with my S700i ( see this: http://www.esato.com/board/viewtopic.php?topic=94279#post1314242 ) and i had to flash an old firmware (that i had, not taken from Davinci FTP) with a generic CDA information, and after that, I got the latest firmware from SEUS.
--
Posted: 2005-07-26 22:17:46
Edit : Quote

imhotepp Posts: 74

Well, my biggest problem now is switching on the phone, I believe to flash anything you need to push the on button slightly. That doesnt work now

How long should I wait with the battery removed from the phone?
--
Posted: 2005-07-26 22:27:04
Edit : Quote

merolliaz Posts: 7

Maybe, 10 seconds i think. But would suggest you to reboot your PC and try again.
--
Posted: 2005-07-26 22:34:05
Edit : Quote

imhotepp Posts: 74

I left the battery outside for an hour but still the phone will not turn on when I place the battery back in.

Will it turn on again? What must I do to recover it?
--
Posted: 2005-07-27 00:01:10
Edit : Quote

merolliaz Posts: 7

You must complete the flashing procedure. After that, you must do the finalization procedure. Your phone won't start without that.
If you're having problems with the latest firmware, try flashing another one (an older firmware instead).
--
Posted: 2005-07-27 00:37:39
Edit : Quote

muppet Posts: 165

Quote:
On 2005-07-26 22:27:04, imhotepp wrote:
Well, my biggest problem now is switching on the phone, I believe to flash anything you need to push the on button slightly. That doesnt work now

How long should I wait with the battery removed from the phone?

The "press power button" isn't there to turn the phone on, it's so that Davinci gets a signal via the cable to start the phone flash.

You should still be able to restart the phone flash using Davinci even though the phone won't currently turn on.
Leaving your battery out for 2 years will not help, if the firmware isn't complete in the phone's flash it won't power on.
--
Posted: 2005-07-27 02:45:39
Edit : Quote

imhotepp Posts: 74

Well, even if I press the power on button the davinci client still keeps waiting the power button to be pushed, meaning it doesnt get the signal or what?

The thing is davinci client now doesnt work anymore
--
Posted: 2005-07-27 09:28:18
Edit : Quote

imhotepp Posts: 74

When I try to recover, the client is stuck here

Quote:
Client Version 13.51
Shortly press Power button!

I keep pressing the power button but it remains there

I desperately need help, I emailed davinci support but no response yet
--
Posted: 2005-07-27 09:41:28
Edit : Quote

imhotepp Posts: 74

Here is the full error log of the client

--------------26/07/2005 19:19:19--------------
Client Version 13.51
Shortly press Power button!
Detected SonyEricsson:
K700/K300/K500/S700/Z500.
Status Ok, OTP Close, CID29, PAF1
IMEI: 354006-00-368028
Loading Main File. Ok!
Loading FS File. Ok!
Flash file CID:36
Phone CID:29
Phone CID and Flash file CID mismatch. Please
use CID Ignoring option,
or flash Transform BIN to phone
Flashing 217 blocks...
Block Not accepted
Execution Time - 00:00:21
Error: 0x005556

--------------------------------------------
--------------26/07/2005 19:20:52--------------
Client Version 13.51
Shortly press Power button!
Execution Time - 00:00:31
Stopped!

--------------------------------------------
--------------26/07/2005 19:21:30--------------
Client Version 13.51
Shortly press Power button!
Execution Time - 00:00:17
Stopped!

--------------------------------------------
--------------26/07/2005 19:29:37--------------
Client Version 13.51
Shortly press Power button!
Detected SonyEricsson:
K700/K300/K500/S700/Z500.
Phone Color RED
Status Ok, OTP Close, CID29, PAF1
IMEI: 354006-00-368028
Loading Main File. Ok!
Flash file CID:36
Phone CID:36
Flashing 217 blocks. Ok!
Flash file CID:36
Phone CID:36
Flashing 101 blocks...
Block Not accepted
Execution Time - 00:06:29
Error: 0x005556

--------------------------------------------
--------------26/07/2005 19:30:17--------------
Client Version 13.51
Shortly press Power button!
Execution Time - 00:00:11
Stopped!

--------------------------------------------
--------------26/07/2005 19:32:25--------------
Client Version 13.51
Shortly press Power button!
Detected SonyEricsson:
K700/K300/K500/S700/Z500.
Phone Color RED
Status Ok, OTP Close, CID29, PAF1
IMEI: 354006-00-368028
Flash file CID:36
Phone CID:36
Flashing 217 blocks...
Block Not accepted
Execution Time - 00:01:34
Error: 0x005556

--------------------------------------------
--------------26/07/2005 19:33:46--------------
Client Version 13.51
Shortly press Power button!
Detected SonyEricsson:
K700/K300/K500/S700/Z500.
Recovering process started!
Status Ok, OTP Close, CID29, PAF1
IMEI: 354006-00-368028
Flashing 1 blocks...
address: 00000000, block: 1/1
cert red29 flashed successfully
Recovered successfully!
Execution Time - 00:00:38
Reflash MAIN Firmware now!

--------------------------------------------
--------------26/07/2005 19:34:05--------------
Client Version 13.51
Shortly press Power button!
Detected SonyEricsson:
K700/K300/K500/S700/Z500.
Status Ok, OTP Close, CID29, PAF1
IMEI: 354006-00-368028
Flash file CID:36
Phone CID:36
Flashing 217 blocks...
Block Not accepted
Execution Time - 00:00:11
Error: 0x005556

--------------------------------------------
--------------26/07/2005 19:41:02--------------
Client Version 13.51
Shortly press Power button!
Detected SonyEricsson:
K700/K300/K500/S700/Z500.
Execution Time - 00:00:10
Error: 0x002A24

--------------------------------------------
--------------26/07/2005 19:41:20--------------
Client Version 13.51
Shortly press Power button!
Execution Time - 00:00:09
Stopped!

--------------------------------------------
--
Posted: 2005-07-27 10:30:37
Edit : Quote

Page12 >

New Topic Reply