>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Symbian phones
> Hacking into wasted P800
Bookmark topic
Quote:
On 2004-01-13 22:27:47, MominIslam wrote:
dont you have to install software to the phone first
How would I do that, I suppose i'd use the P900 "Install Software" utility but when it doesn't display a phone connected... no go!
Do you need to insert a sim card into it for it to work?
[ This Message was edited by: grapetonix on 2004-01-13 21:37 ]
--
Posted: 2004-01-13 22:34:57
Edit :
Quote
You need to put a sim card in.
If he has a secutrity lock code, the one that comes on when you turn on your phone, then I think your pretty much screwed. If it doesn't on the other hand, then all you need to do is turn it on, sit it in the cradle, and sync away.
Good luck.
--
Posted: 2004-01-13 22:51:42
Edit :
Quote
Hmm, I know we don't discuss this on esato but what would happen if i blew the code with e.g. div? Does it get to 0000 or won't I have to enter it?
I believe that's hard though, as I don't have div hardware.
--
Posted: 2004-01-13 23:23:45
Edit :
Quote
well, to get the hardware would probably cost u more than it's worth. But to be honest I wouldn't know, and I dont think you'll find out here. You should try places that sell the equipment.
So you've put a sim card in and you can't connect still? I would say there isn't much you can do. I'm sure u cud get the screen replaced though...? If it's booting but ur just saying it's the screen...
--
Posted: 2004-01-13 23:36:45
Edit :
Quote
why not buy a damaged p800 which has its innards f**ked but screen is fine then swap the PCBs around.
--
Posted: 2004-01-14 00:13:19
Edit :
Quote
You will be damn lucky to find one. Majority of dud P800's are due to damaged screens!
--
Posted: 2004-01-14 00:28:43
Edit :
Quote
i would see if you can link the VDU out put in to a VDU device which has a touch screen interface.
--
Posted: 2004-01-14 00:30:57
Edit :
Quote
Hi Easen, can you send us the settings of the hyperterminal? e.g. bits per second and flow control setting?
thanks.
--
Posted: 2004-01-14 13:44:32
Edit :
Quote
If you got one laying around - a chatboard! that would work.....
richard
--
Posted: 2004-01-14 14:09:16
Edit :
Quote
the setting for the Hyper Terminal are:
Bits: 19200
Data Bits: 8
Partity: NONE
Stop Bits: 1
Flow Control: NONE
How that helps
--
Posted: 2004-01-14 15:33:11
Edit :
Quote
New Topic
Reply
