Esato Forums - Sony Ericsson / Sony : GPRS, WAP, MMS and Email setup : Using GPRS internet for PC browsing? K700i

Index Menu

> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > GPRS, WAP, MMS and Email setup > Using GPRS internet for PC browsing? K700i Bookmark topic

Page < 12

tomtom Posts: 9

I'd say that a seperate problem to the bluetooth connection.
Do you have firewall software? If so it may be set to allow connection only over certain dial up connections. Also when connected try to ping a website
--
Posted: 2005-04-01 10:18:41
Edit : Quote

Sig_ZA Posts: 14

I agree it is a seperate problem.

Have Norton Firewall, but don't see how this is the problem as Norton is configured to allow IE to access the net.

Will turn it off to test, but can only do this on Monday.
--
Posted: 2005-04-01 19:23:41
Edit : Quote

Sig_ZA Posts: 14

Disabled the the firewall.
Still can't connect.

Anyone know how I can get IE on Win98 to use the bluetooth GPRS dialup connection?
--
Posted: 2005-04-06 06:34:01
Edit : Quote

AlfBaxter Posts: 100

I seem to remember having to type 'AT' in the Extra initialization commands under Phone and Modem options > Advanced in Win2k when I used bluetooth to connect. Maybe worth a go.
--
Posted: 2005-04-06 15:43:02
Edit : Quote

Sig_ZA Posts: 14

Have been using the AT string as supplied by my SP.
No idea what it means: at+cgdcont=5,”IP”,”internet”

Even tried leaving it out and still makes no difference.

--
Posted: 2005-04-09 06:34:47
Edit : Quote

wildsdi Posts: 1

well same problem on a t610 connected via a serial cable..
connection starts at 115kbps but no program(IE,mozilla,DAP,Flashget,updates..) work with the connection.
am connected using airtel online.
--
Posted: 2005-04-11 22:14:48
Edit : Quote

strayboar Posts: 54

You need to go to "add new hardware" in your control panel and install a Bluetooth modem for your cellphone (found on your cellphone software CD).

Then make a new dial-up connection and make the phone number "*99***2#". Link the modem for the connection to your Bluetooth modem. Restart the computer, and dial the connection. Should work...
--
Posted: 2005-04-13 16:30:55
Edit : Quote

steele Posts: 329

The phone number to be dialed "*99***3#" depends on what CID profile your internet settings where saved on your phone. E.g. on my t68i, it was saved as CID=3. so it will be dialed as *99***3#. if CID=1, *99***1#.
--
Posted: 2005-04-14 02:31:19
Edit : Quote

Sig_ZA Posts: 14

strayboar & steele SMOOCH!!!!!!!!

Took long enough, but now I at least have a response that not only makes sence, it works!
--
Posted: 2005-04-14 19:39:48
Edit : Quote

Page < 12

New Topic Reply